Emerson ER100103 Manual

Emerson Ikke kategoriseret ER100103

Læs gratis den danske manual til Emerson ER100103 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 12 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 6.5 anmeldelser. Har du et spørgsmål om Emerson ER100103, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

OWNER'S MANUAL

ER100103

SmartSet Clock Radio,

With Auto Date-Time Setting System,

1.4" Blue Jumbo Display,

Dual Alarms, PLL FM Radio,

USB Charging and

Red Projection Clock

(SmartSet Patent No. 6,567,344)

Location of Controls and Indicators

Setting Time Zone / Clock / Alarm Week Mode

NOTE: If you manually adjust the time, your new setting is entered into the

SmartSet memory. If the power is interrupted, the display will return to

your new setting, not the original setting, when the power is restored.

Date and Year Display and Adjustment

YEAR ADJUSTMENT:

While at YEAR DISPLAY, press the" " or " " button to adjust the Year ▼ ▲

Depress and hold the "TIME ZONE" button.

Press the " " or " " button until your own time zone appears on the ▼ ▲

display, then release the buttons.

There are 7 time zones programmed into your clock radio as SmartSet

follows:

ZONE 1 — Atlantic Time ZONE 2 — Eastern Time (Default Setting)

ZONE 3 — Central Time ZONE 4 — Mountain Time

ZONE 5 — Pacific Time ZONE 6 — Yukon Time

ZONE 7 — Hawaiian Time

Adjusting The Wake Up Times and

Alarm Week Mode

Everyday

The alarm will

turn on all 7 days.

Weekdays only

The alarm will only

turn on Monday

through Friday.

The alarm will only

turn on Saturday

and Sunday.

Alarm Week Mode

Press and hold the "AL1" ("AL2") button until the

display flashes, then release the buttons.

Press the "AL MODE" button to select the

Alarm Week Mode , or that suits your need.

Short press the “AL1” (“AL2”) button again,

Alarm Volume (U03-U15) will display.

Repeat the Alarm Volume setting procedure

stated above.

Selecting The Alarm We ek Mode( / / )

A B

NOTE: Be sure that you have set the wake up time by observing the AM

indicator. If the AM indicator is 'On ' the wake up time is "AM". Otherwise

the wake up time is "PM".

Daylight Saving and Leap Year Adjustments

Al l Da yl i gh t Sav i n g a n d L e ap Yea r a d j us t me n ts ar e m a de

au t om a ti c a ll y by the SmartSet internal computer as follows:

• Start of Daylight Saving Time:

At "2:00 AM" on the 2nd Sunday in March, the clock will automatically

advance to "3:00 AM".

• End of Daylight Saving Time:

At '3:00 AM' on the 1st Sunday in November, the clock will automatically

reset to "2:00 AM".

• Leap Year:

At "12:00 Midnight" on February 28th, the calendar display will change

to "2.29".

Manual Time Adjustments

Press and hold the “TIME” button, and then short or long press the

" " or " " button to advance Hour or Minutes.▼ ▲

The first time you connect your new clock radio to the AC outlet SmartSet

the internal computer will automatically set the time correctly for the Eastern

Time Zone, which is the initial default setting.The display will scan for a few

seconds and then show the correct and in the Eastern zone. If you Day Time

live in the Eastern Time zone, there’s nothing else to do. Your clock is set

correctly and running.If you do not live in the Eastern Time zone you must

change the default zone display to your own zone. You only do this one time

and the will remember the new default zone setting and will SmartSet

always return to that setting after a power interruption.

Press and hold the “AL1” (“AL2”) button until the

display flashes, then release the button.

Short or long press the " " or " " button to ▼ ▲ 

advance Hour or Minutes.

Short press the “AL1” (“AL2”) button again,

Alarm Volume (U03-U15) will display.

Short or long press the " " or " " button to ▼ ▲ 

decrease or increase the maximum volume of the

buzzer or radio alarm at which the alarm will

reach gradually at wake up time.

Then, short press the “AL1” (“AL2”) button again

to finish this alarm setting process, or leave the

unit idle, that will resume to time/standby mode

automatically.

Adjusting The Wake Up Times for AL1 or AL2

Package Contents

ER100103 Clock Radi o x 1

Read Thi s Sheet

SN OOZE

DIM MER

SLE EP

ZON E

TIM E

MEM .STO RE

VOL +VOL

AL MOD E

DATE

YEA R

TIM E

AL1 AL2 - TUNE / S ET +

SNO OZ E

DIM MER

22 23

SL EEP

ZO NE

TI ME

AL MO DE - TUN E / SET +

DATE

YEA R

TIM E

ME M.STO RE

AL1 AL2

VO L+VO L

16. S peak er (B ac k Cabinet).

17. MEMTIME Setting / FM Station Recall

18. S TORE MONTH/DATE Setting / Radio

Station .abc

19. 1 VOLUME-ALARM Setting / Button .

2 2 VOLUME+0. ALARM Setting / Button.

21. P roj ecto r.

22. (Button.UNIT ON / OFF Standb y)

23. / Button .SNOOZE DIMMER

24. SLEEP B utton(Slee p To Music Time r).

Button. ▲ 25. TUNE +/ S ET

▼ 26. TUNE -/ Button.SET

adapter(Bo tto m Cabine t).27. AC

28. A dapter's cable (also acts

as the FM antenna)

Holder(29. B ackup Bat tery Bac k Cab inet)

1. (AL 1'Radi o' Alarm Indic ato r.)

2. (AL 1'Buzzer' Alarm In dicator.)

3. AM Indicator.('On'=AM;'Off'=PM)

4. AUX Indicator.

5. DAY OF WEEK MON, Indic ators.(

TUE ,WED,THU,FRI,SAT,SUN)

6. Projection clock Button.ON/OFF

7. ROTATE IM AGE Button.

8. LOW Batter y Indicator.

9. FM Radio Indicator.

10. (AL 2 ‘B uz z er’) Alarm Indi cator.

11. (AL 2 ‘Radio’) Alarm Indicator.

12. Ti me/Date Dis play.

13. / Button .TIME ZONE AL M ODE

14. USB Charge Out

15. J ac k. AUX IN

SNOOZ E

DIMMER

ZO NE

TI ME

ME M.STO RE

VO L+VO L

AL MO DE

DATE

YEA R

TIM E

AL1 A L2 - TUN E / SET +

SL EEP

Note: Time Zone and Date/Time setting can only be adjusted

in standby mode, where the function of Radio and AUX are 

disabled (indicators of "MHz" and "AUX" are Off).

DATE DISPLAY(MM.DD):

Press and hold the DATE button " "

DATE ADJUSTMENT:

Press and hold the DATE button and then short or long press the “ ” ,

" " or " " button to advance Month or Date▼ ▲ .

For example May 21st will appear as 5 21 , " . ".

Release the buttons to finish the adjustment .

YEAR DISPLAY(YYYY)

Press and hold the "DATE" and "TIME" button

Release the buttons to finish the adjustment.

A B

Tuning to The FM Radio

Storing Station to the Memory

Listening to The Radio

Recalling Station from the Memory

After the radio is ‘On’ ,press , ‘P XX’ shows on the display .The station

according to this memory location will then be automatically tuned in.

To change memory location(P01~P20),press to step Up or press to step

Up/Down to locate and tune in the station stored in memory.

Enjoying Audio Sources with AUX IN Jack

Remark:

Even the jack is plugged in, the alarm sound only be Buzzer or Radio AUX IN

according to your Alarm Mode setting while the alarm function is activated.

Press to turn the unit ‘On’.

Connect the audio source from its earphone jack to with a 3.5mm Male to

Male stereo AUX cable (not provided)

AUX indicator will be On connected，when the AUX cable

Start to play the audio source.

The AUX volume can be adjusted through your audio players only.

1 hour

Radio gradually

• →Alarm 1 Single beep" sound

• →Alarm 2 Double beep" sound

1 hour

Buzzer gradually

Wake To Radio and Radio Alarm Volume Setting

Setting The Alarm

Wake To Buzzer

Press to turn the radio ( MHZ ‘On’) without AUX cable connected.On

Press or recall station from the to select the station that you Memory

wish to hear when the alarm comes ‘On’.

Press to set the maximum radio volume at which the alarm will

reach gradually at wake up time .

Turn Off the radio if it is On.

Then follow through the steps stated in the “Adjusting The Wake Up Times

and Alarm Week Mode” section to set the Radio Alarm and Volume for AL1

or Al2.

Press slightly, and repeat doing so if necessary, until or

indicator is lit on the display.

If you do not want the alarm to turn the radio on the following day , press

and release continuously until the ALARM indicator on the display is

‘Off’.

9 minutes

Radio And Buzzer Operation

You may also set one alarm for wake to and the other for wake to RADIO

BUZZER AL 1 AL 2. Just press the and buttons to the desired status as

shown on the ALARM indicators.

Reconfirm the wake up time and alarm mode settings for the alarm

you are using by pressing and holding when the"AL1" ("AL2")

unit is . ‘Off’

If alarm time adjustment is needed, follow through the steps stated in the

“Adjusting The Wake Up Times and Alarm Week Mode” section to set the

Buzzer Alarm and Volume for AL1 or AL2.

Press slightly, and repeat doing so if necessary, until or indicator

is lit on the display.

At the selected wake up time the buzzer will sound gradually and continue 

for 1 hour, press to stop the buzzer sooner.

If you do not want the alarm to buzzer on the following day, press and

release continuously until the ALARM indicator on the display is ‘Off’.

Snooze Alarm

Press the "SNOOZE/DIMMER" button while in Standby mode and select

any of the four levels. It also can be adjusted when the Radio or AUX is On.

4-Level Dimmer Control

toward any light-colored ceiling Tilt the rotatable Projector

or wall.

Press the Projector “ON/OFF” button to project the clock time

image .onto the ceiling or wall

Rotate the knob of the Projector either in clockwise or counterclockwise

direction to bring the image to focus.

If the image is inverted, press the “ROTATE IMAGE” button to meet

your needs.

Note: The projector will come On when the alarm comes On. It will turn

Off once the alarm is turned Off.

Lithium Battery Precautions

• Dispose of the old battery properly. Do not leave it lying around where a young

child or pet could play with, or swallow it. If the battery is swallowed, contact a

physician immediately.

• Battery may explode if mistreated. Do not attempt to recharge it or

disassemble it. Do not dispose of the old battery in a fire.

Care Of Cabinets

If the cabin et becomes dust y, wipe i t with a soft cloth. If the cabinet

becom es smudged or dirty, clean it with a soft, slightly dampened cloth .

Nev e r all o w wa t e r o r an y liq u i d t o g et in si d e th e cab i n e t. N e ver u se

a ny abrasive cleaners or cleaning pads as these will damage the finish of

your radio.

15 CARE AND MAINTENANCE

Emerson Radio Corp. warrants this product to be free from manufacturing

defects in original material, including original parts, and workmanship under

normal home use and conditions (“manufacturing defect”) for a period of ninety

(90) days from date of original purchase in, and if used in the United States.

Should service be necessary under this warranty, Emerson will provide the

following at our Return Repair Facility provided the manufacturing defect is

verified along with the date of purchase:

* Repair service for ninety (90) days from date of original purchase at no

charge for labor and parts.

To Receive Authorization to Return a Defective Item, please contact

Emerson Customer Service at 1-800-898-9020. Have your Model number,

Serial Number and dated Proof of Purchase with you when you call.

In the event the product must be returned to Emerson:

* Pack the unit in a well-padded heavy corrugated box. Please insure the item

is well padded to avoid damage while in transit back to our facility. If the item

incurs damage, it will NOT be replaced and the consumer will be responsible

for return freight costs to receive their same unit back.

* Enclose your check or money order payable to Emerson Radio in the

amount of $10 to cover return shipping and handling costs.

* Enclose a note with your name, address, phone number, Return

Authorization number and brief reason for returning the unit.

* Enclose a copy of your proof of purchase (warranty service will not be

provided without dated proof of purchase).

* Ship the unit prepaid via UPS or parcel post (SHIP INSURED and obtain a

abtracking number).

NOTE: This warranty does not cover:

(a) Damage to equipment not properly connected to the product.

(b) Cost incurred in the shipping of the product to and from Emerson's Return

abcFacility.

negligence or failure to follow operating instructions (including cleaning

abcinstructions) provided with the product.

(d) Ordinary adjustments to the product which can be performed by customer

as outlined in the owner's manual.

(e) Signal reception problems caused by external antenna or cable systems.

(f ) Products not purchased in the United States.

(g) Damage to product if used outside the United States.

THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE

ORIGINAL PURCHASER AND DOES NOT EXTEND TO SUBSEQUENT OWNERS

OF THE PRODUCT. ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING THE

WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD

OF THE EXPRESSED WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE

DATE OF ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER

EXPRESSED OR IMPLIED, SHALL APPLY TO THE PRODUCT THEREAFTER.

EMERSON MAKES NO WARRANTY AS TO THE FITNESS OF THE PRODUCT

FOR ANY PARTICULAR PURPOSE OR USE.THE EXTENT OF EMERSON RADIO

CORP'S LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR

REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL EMERSON RADIO

CORP'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE PURCHASER

OF THE PRODUCT. UNDER NO CIRCUMSTANCES SHALL EMERSON RADIO

CORP. BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH THE

USE OF THIS PRODUCT. THIS WARRANTY IS VALID ONLY IN THE UNITED

STATES OF AMERICA.THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.

HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO

STATE. SOME STATES DO NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES

OR EXCLUSION OF CONSEQUENTIAL DAMAGE, THEREFORE THESE

RESTRICTIONS MAY NOT APPLY TO YOU.

LIMITED WARRANTY

Model Number : ER100103

Serial Number :

The serial number can be found on the back cabinet. We suggest that you

record t he serial number of your unit in the space below for future

reference.

10-90-1402A

Emerson Part No. ER100103-20180108-00 Printed in China

10 90 min ,-

shut off automatically

Turn the unit On to Radio or AUX IN mode.

Short press the “SLEEP” button to choose your desired sleep timer

(10-90 minutes or OFF).

To display the sleep timer during countdown, press the “SLEEP” button.

To cancel the sleep timer, press to shut off the unit.

11 2~3 years battery life

CR2032(3V)

NEGATIVE(-)POSIT IVE(+)

Changing The Lithium Battery

USB For Charging

Output DC for 5V 1.2A

charging mobile phone or

portable digital audio player.

Note: Charging current drawn from the unit may vary due to different USB

charging cable condition or battery charging characteristics.

1SNOOZE

DI MME R SLEEP

ZO NE

TIME

AL M ODE - TUNE / SET +

DAT E

YE AR

TI ME

ME M.STOR E

AL 1 AL 2

VOL+VOL

NOOZ E

DIMME R

- TU NE / S ET +

DAT E

YEAR

TIM E

AL1 A L2

VOL+ ME M.

STO

VOL

EE P

ZONE

TIME

AL MO

- TUN E / SET +

DATE

YEAR

TIM E

AL1 AL2

VO L+ M

EM.

STO RE

VOL

SNOO ZE

DIMM ER

OO ZE

DIM M

AUX

PLAY

SLE EP

ZON E

TIM E

MEM .STOR E

VOL +VOL

AL MO D E

DATE

YEAR

AL1 AL2 - TUN E / S ET +

TIME

AM M

MMHz

HzHz

- TUNE / S ET +

DATE

TIM E

1AL

L+ ME

STORE

VOL

SNOOZE

DIM MER

SL EEP

ZO NE

TI ME

AL MO DE

ON/

OFF

ROTAT

IMAGE

- TUN E / SE T +

DATE

YEAR

TIME

AL 1 AL 2

VOL +

STO R E

SNOOZE

DIMMER

SLEEP

ZONE

TIME

AL MO DE

- TUNE / S

ET +

DATE

YEA

TIME

AL1 AL2

VO L+ MEM.

STORE

VOL

SN OOZE

DI MM ER

SL EEP

ZO NE

TI ME

AL MO DE

SL EEP

ZO NE

TI ME

AL MO DE

SNOOZE

DIMM ER

- T

NE / S

ET +

DATE

YEAR

TIME

L1 AL2

VO L+ ME M.

STO RE

SL EE P

ZON E

TI ME

L MO DE

NEGATIVE( )－

SNOOZE

DIM MER

- TU NE / S ET +

DATE

YE AR

TI ME

AL 1 AL 2

VO L+ M

EM.

STO

VOL

LEE P

ONE

TIM E

AL M ODE

radio

SAT SU N

DATE

YEAR

TIME

AL1AL2

VOL+MEM.

STORE

VOL

SNOO ZE

DI MME

SLE EP

ZON E

TIM E

AL MOD E

- T

UNE / SET +

DATE

YEA R

TIM E

L1AL2

VOL+M

EM .

ST ORE

SNOO Z E

MMER

SL EEP

ZO NE

TI ME

AL MO DE

SAT SU N

SAT SUN

5V 1.2 A

USB C

HAR.

AU X I

1. 2A

USB C

1.2A

USB C H AR.

X IN

SN OO Z

DIMM ER

SLE EP

ZON E

TIM E

MEM .STO RE

VOL +VOL

AL MO DE

DATE

YEA R

TIM E

AL1 AL2 - TUNE / S ET +

SNOOZ E

MMER

SLE EP

ZON E

TIM E

MEM .STO RE

VOL +VOL

AL MO DE

DATE

YEA R

TIM E

AL1 AL2 - TUNE / S ET +

Projecting the Clock Alarm Time  / 

Sleeping to Music Timer

The built-in lithium battery is used to supply power to the SmartSet®

computer memory during storage period or power interruption. When the

battery power drops below a certain level, the LOW BATTERY "  "

indicator will `Flash'. You should replace the battery with a new 3V lithium

CR2032 or equivalent as follows:

1) Use a small screw driver to remove the screw securing the battery

holder to the cabinet.

2) Remove the original battery from the holder and insert the new battery

into the holder the same way, observing the positive (+) polarity.

3) Slide the holder with the new battery back into the slot in the cabinet.

4) Replace the screw that secures the battery holder in the cabinet.

Produkt Specifikationer

Mærke:	Emerson
Kategori:	Ikke kategoriseret
Model:	ER100103

Har du brug for hjælp?

Hvis du har brug for hjælp til Emerson ER100103 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Emerson Manualer

Emerson FAT2835 Manual

1 Juli 2025

Emerson FAO1605 Manual

1 Juli 2025

Emerson MW9255W Manual

30 Juni 2025

Emerson MW7302W Manual

27 Juni 2025

Emerson SH1501 Manual

23 Juni 2025

Emerson CKD8300 Manual

27 December 2024

Emerson CR175W Manual

27 December 2024

Emerson CKD9906 Manual

27 December 2024

Emerson PB1001B Manual

10 December 2024

Emerson PBW1010B Manual

10 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Hozelock 5102 Manual

2 August 2025

ART 310 Manual

2 August 2025

Gorenje KAS53ZDCINVFT Manual

2 August 2025

Gorenje KAS35ZDCINVFT Manual

2 August 2025

Navman MY450LMT Manual

2 August 2025

Navman MiVue 745 Manual

1 August 2025

Hitachi WR22SE Manual

1 August 2025

Synology M2D20 Manual

1 August 2025

Fluke FibertLert-125 Manual

1 August 2025

Buffalo GC882 Manual

1 August 2025