Adjusting the Wake-up Time for AL1 and AL2:
1. Press and Hold the button until Alarm Time A
and the “AL1” indicator ‘flash’.
2. Press the button to adjust the Minutes and Hours, or– / +
3. Press and Hold the button to scroll through rapidly the – / +
Minutes and Hours until your desired Alarm Time for AL1 reaches.
4. Press the button to finish the Alarm setting for AL1, then the “AL2” A
indicator ‘flashes’ for adjustment.
5. Press the button to adjust the Minutes and Hours, or– / +
6. Press and Hold the button to scroll through rapidly the Minutes and – / +
Hours until your desired Alarm Time for AL2 reaches.
7. Press the button to finish the Alarm setting for AL2. It will restore clock A
time on display.
8. To quit the setup at any time, simply leave the unit idle for 5 seconds.
Activating and Deactivating the Alarm Mode:
1. Press the button repeatedly to activate your desired Alarm mode: AL1, A
AL2, or AL1+AL2.
2. When the “AL1/2” indicator glows, the alarm will go off gradually at wake-
up time.
3. To completely turn Off the Alarm, press the button repeatedly until the A
“AL1” and “AL2” indicators ‘Off’.
Emerson Radio Corp. warrants this product to be free from manufacturing
defects in original material, including original parts, and workmanship
under normal home use and conditions (“manufacturing defect”) for a
period of ninety (90) days from date of original purchase in, and if used in
the United States. Should service be necessary under this warranty,
Emerson will provide the following at our Return Repair Facility provided
the manufacturing defect is verified along with the date of purchase:
* Repair service for ninety (90) days from date of original purchase
at no charge for labor and parts.
To Receive Authorization to Return a Defective Item, please contact
Emerson Customer Service at 1-800-898-9020 or at
http://www.emersonradio.com/service/return-policy. Have your Model
number, Serial Number and dated Proof of Purchase with you when you
call.
In the event the product must be returned to Emerson:
* Pack the unit in a well-padded heavy corrugated box. Please insure the
item is well padded to avoid damage while in transit back to our facility.
If the item incurs damage, it will NOT be replaced and the consumer
will be responsible for return freight costs to receive their same
unit back.
* Enclose your check or money order payable to Emerson Radio in the
amount of $10 to cover return shipping and handling costs.
* Enclose a note with your name, address, phone number, Return
Authorization number and brief reason for returning the unit.
* Enclose a copy of your proof of purchase (warranty service will not be
provided without dated proof of purchase).
* Ship the unit prepaid via UPS or parcel post (SHIP INSURED and obtain
a tracking number).
The serial number can be found
on the bottom cabinet. We
suggest that you record the
serial number of
space below for future reference.
Model Number: ER100210
Serial Number:
Emerson Part No.
ER100210-20190927-00
Printed in China
NOTE: This warranty does not cover:
(a) Damage to equipment not properly connected to the product.
(b) Cost incurred in the shipping of the product to and from Emerson’s
Return Facility.
(c) Damage or improper operation of unit caused by customer abuse,
misuse, negligence or failure to follow operating instructions (including
cleaning instructions) provided with the product.
(d) Ordinary adjustments to the product which can be performed by
customer as outlined in the owner’s manual.
(e) Signal reception problems caused by external antenna or cable
systems.
(f ) Products not purchased in the United States.
(g) Damage to product if used outside the United States.
THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES ONLY TO THE
ORIGINAL PURCHASER AND DOES NOT EXTEND TO SUBSEQUENT
OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED WARRANTIES,
INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN
DURATION TO A PERIOD OF THE EXPRESSED WARRANTY AS PROVIDED
HEREIN BEGINNING WITH THE DATE OF ORIGINAL PURCHASE AT RETAIL
AND NO WARRANTIES, WHETHER EXPRESSED OR IMPLIED, SHALL
APPLY TO THE PRODUCT THEREAFTER. EMERSON MAKES NO
WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR ANY
PARTICULAR PURPOSE OR USE.THE EXTENT OF EMERSON RADIO
CORP’S LIABILITY UNDER THIS LIMITED WARRANTY IS THE REPAIR OR
REPLACEMENT PROVIDED ABOVE AND, IN NO EVENT, SHALL EMERSON
RADIO CORP’S LIABILITY EXCEED THE PURCHASE PRICE PAID BY THE
PURCHASER OF THE PRODUCT. UNDER NO CIRCUMSTANCES SHALL
EMERSON RADIO CORP. BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF
OR IN CONNECTION WITH THE USE OF THIS PRODUCT. THIS WARRANTY
IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS. HOWEVER, YOU MAY HAVE OTHER
RIGHTS WHICH MAY VARY FROM STATE TO STATE. SOME STATES DO
NOT ALLOW LIMITATIONS ON IMPLIED WARRANTIES OR EXCLUSION OF
CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY
NOT APPLY TO YOU.
10-90-1402A
Wake-to-Buzzer Alarm Mode and Alarm Volume Setting:
1. Wake-to-Buzzer Alarm mode can be activated only if the last function
mode before the unit is shut down is Bluetooth / AUX mode.
2. Default alarm volume is V08 if the last Bluetooth / AUX volume before
the unit is turned Off is set between V00-V08.
3. For a louder alarm, set up the Bluetooth / AUX volume above V08 before
turning Off the unit.
If you want to disconnect this unit from your Bluetooth enabled device
after pairing successful, press and hold the button for 2 seconds. A
To reconnect this unit, just Press and Hold the button for 2 seconds, or A
select 'ER100210’ again from the Available/Paired device list.
Listening to Bluetooth Speaker:
• Press and Hold the POWER button for 2 seconds
to turn the unit ON.
• Press the M button repeatedly to select Bluetooth
(bt) mode (“BT” indicator ‘flashes’ for pairing).
• Enable your Bluetooth device and select ER100210 from its
Available/Paired device list. If pairing is successful, the unit will
prompt and “BT” indicator will become solid.
• Automatic connection with your Bluetooth devices is possible if they
have been paired successfully with this unit before.
• Once paired, you can play your music through this Bluetooth Speaker.
• To pause or resume playback, press briefly the POWER button.
• To select a specific track, Press and Hold the – / + button for 2 secs
then release
• When you finish listening to Bluetooth music, press the M button
repeatedly to select other function mode, or Press and Hold the POWER
button for 2 seconds to turn the unit Off.
Note: If pairing is unsuccessful, all previously paired Bluetooth devices
around should be disconnected first, or turn Off their Bluetooth connection
in order to avoid making any auto reconnection between them. Then, set
this unit to Bluetooth mode, and tap the Bluetooth switch on your
smartphone/device Off and back On again to refresh/search of any nearby
ER100210 units for pairing.
Press and Hold the button for 2 seconds to turn the unit On. Press POWER
the button to switch it to Radio mode. Radio frequency will display with M
its “MHz” indicator ‘On’. When you play the Radio for the first time, use the
AMS function mentioned below to set up the Program Number Memory
(P01-P50) for a quick access to your favorite stations.
1. Make sure the USB cable is connected to the unit
as it functions as an antenna for FM signal
reception (USB adapter is also required to
power the unit).
2. Auto Memory Saving (AMS) - Auto Searching / Scanning / Saving FM
Stations, Press and Hold the button for 2 seconds and then releaseM
for automatic searching and saving of the captured radio stations into
Memory (Program Number from P01 to P50).
Note: Searching will only stop at a station with acceptable reception before
saving onto memory.
3. Recalling Favorite Stations from Program Number Memory (P01-P50)
• Press and Hold the - / + button for 2 seconds to display the Program
Number, select the one to recall from Memory for listening. Radio
frequency (MHz) will be showing after Program Number displayed.
• Press briefly the - / + button to adjust volume.
• When done listening, press the M button to switch to either Bluetooth or
AUX function, or Press and Hold the button for 2 seconds to turn POWER
the unit Off.
Note: Keep the unit away from other electronic devices to avoid any radio
interference.
Receive your desired station with manual Tuning Control:
1. Press and Hold the button for 2 secs then release, Auto Station A
Seeking will be engaged, the receiving frequency will increase
automatically until a station with appropriate reception is captured.
2. Manual tuning is possible by pressing the button briefly, the receiving A
frequency will advance in a 0.1MHz step.
Receive your desired station with manual Tuning Control:
1. Press and Hold the button for 2 secs then release, Auto Station A
Seeking will be engaged, the receiving frequency will increase
automatically until a station with appropriate reception is captured.
2. Manual tuning is possible by pressing the button briefly, the receiving A
frequency will advance in a 0.1MHz step.
Snooze Alarm:
When the alarm comes On, press the button to pause it for 9 SNOOZE
minutes. Alarm indicator will ‘flash’. If not turned Off, the Snooze Alarm will
only be active for one hour. To shut Off the Snooze Alarm completely,
press the or button once to silence the alarm for 24 hours with POWER A
the alarm indicator remaining ‘On’. The alarm will then come On again at
the same time the next day. To cancel the Alarm mode, press the button A
repeatedly to turn the “AL1” and “AL2” indicators ‘Off’.
Hands-free Phone Conversation:
• Hands-free functions only if the Bluetooth connection is set up
successfully between your smartphone and the unit.
• To answer an incoming call, press briefly the POWER button.
• To decline an incoming call without answering it, Press and Hold the
POWER button for 2 seconds.
• To finish hands-free conversation, press briefly the POWER button.
Wake-to-Radio Alarm Mode and Alarm Volume Setting:
1. Press and Hold the button for 2 seconds to turn the unit On.POWER
2. Press the button to select FM Radio mode (the “MHz” indicator ‘On’).M
3. Tune in or recall from Memory the station that you wish to hear when the
Alarm goes off.
4. Press the button to set the maximum radio volume at which the – / +
Alarm will gradually reach at wake-up time.
5. Default alarm volume is V08 if the last radio volume is set between
V00-V08 before the unit is turned Off.
6. For a louder alarm, set up radio volume above V08 before shutting down
the unit.
Note: Wake-to-Radio Alarm mode can be activated only if the last input
source before the unit is shut down is FM Radio mode, otherwise,
Wake-to-Buzzer Alarm mode will then be activated automatically.
This clock radio is equipped with an AUX IN jack for you to connect the
output from your external audio source such as your portable player,
phone, etc. with a jack to jack cable to this audio reproduction unit.
• Press and Hold the POWER button for 2
seconds to turn the unit ON.
• Press the M button repeatedly to select AUX
mode (“AUX” indicator ‘glows’).
• Connect your external audio source via its earphone jack to the
AUX IN jack of this unit via an audio AUX cable (not included) with
both ends in 3.5mm stereo plug.
• Start to play your external audio source and adjust the output volume
to its maximum when necessary.
• Adjust the volume of this clock radio to meet your desired level as well.
• When you finish listening to AUX IN music, press the M button
repeatedly to select other function mode, or Press and Hold the
POWER button for 2 seconds to turn the unit Off.
Note: When alarm time comes, music playing through the AUX IN jack
will be muted, and Wake-To-Music or Wake-To-Buzzer can only be
heard according to your alarm setting.
Press the button while in Standby- / +
Mode to select any of the four
display brightness levels.
Phone Rest is designed as a retractable
platform to enable holding the smartphone
upright for a better viewing angle.
Retractable phone rest
"+" polarity facing down
1
2
When the power to the radio is interrupted, the backup lithium battery
(not included) takes over to maintain the time and alarm settings.
To install a backup lithium battery:
• Leave the USB adapter power system connected to your AC outlet to
retain memory while backup lithium battery is being installed.
• Push the tab lock of the battery holder to the left and Hold it in that
position. Slide the battery holder open.
• Insert a new CR2032 battery or equivalent type into the holder with
the positive (+) polarity facing down, observing the positive (+) polarity
before sliding the holder back into the slot.
• If backup battery is installed properly, the time and alarm settings will
remain unchanged after the USB adapter power system is unplugged
and plugged back in again, otherwise, check above procedure and
adjust the time and alarm settings when necessary.
Note: The lithium backup battery needs replacement when the time and
alarm settings are lost after a power outage. To maximize the life of the
lithium battery, keep the radio connected to a 'live' AC outlet at all times.
Care of Cabinets
If the cabinet becomes dusty, wipe it with a soft cloth. If the cabinet
becomes smudged or dirty, clean it with a soft, slightly dampened cloth.
Never allow water or any liquid to get inside the cabinet. Never use any
abrasive cleaners or cleaning pads as these will damage the finish of
your radio.
Lithium Battery Precautions
• Dispose of the old battery properly. Do not leave it lying around where
a young child or pet could play with or swallow it. If the battery is
swallowed, contact a physician immediately.
• The battery may explode if mistreated. Do not attempt to recharge it or
disassemble it. Do not dispose of the old battery in a fire.
Press and Hold the button for 2 seconds to turn the unit On. POWER
Press the button to select either FM Radio, Bluetooth or AUX mode M
to play music or radio.
• Press the SLEEP button. The display will show the sleep timer (default
10 minutes)
• Press the SLEEP button repeatedly to choose your desired sleep time
(10-90 minutes or OFF).
• To display the sleep timer during the countdown process, Press the
SLEEP button.
• To cancel the sleep timer during the countdown process, Press and
Hold the button for 2 seconds to shut Off the unit.POWER
IMPORTANT: Temperature can only be read in Standby mode.
1. Press briefly the button to sense and display the ambient POWER
temperature in degree Fahrenheit (the “TMP” indicator ‘On’)
2. The temperature can be converted between Fahrenheit and Celsius
scale by pressing the (Celsius) or (Fahrenheit) button while in – +
TEMPERATURE mode.
Fahrenheit Celsius
Press and Hold the NIGHTLIGHT LED
button for 2 seconds to turn the White
LED ‘On’ to illuminate or decorate your
bedroom or desk. To turn it Off, Press
and Hold the button for 2 seconds.
This NIGHTLIGHT LED can be
activated while the unit is turned
On or Off (Standby).
****** S E R V I C E ******
FO IOR A ITDD NAL SET-UP OR OPERATING ASSISTA E NC
PLEASE CALL:
1- 0- 8- 0 80 89 902
FOR STOMER SERVICE, PLEASE E-MAIL TO: CU
inter t@emers radio.com ne on
OR WRITE TO:
Emers R io Corp. on ad
Consumer Affairs D t. ep
35 Waterview Blvd
Parsipp y, NJ 07 4an 05
Sensing Room
Nightlight LED
Temperature
4-Level Dimmer C rol ont
