Emerson SA2-004 Manual

Emerson Ikke kategoriseret SA2-004

Læs gratis den danske manual til Emerson SA2-004 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 13 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7 anmeldelser. Har du et spørgsmål om Emerson SA2-004, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/4
GEIST™ SWITCH IRA
AIRFLOW MANAGEMENT DEVICE
Quick Installation Guide
VM1180/590-2244-501A 1
Models:
SA2-004
Switch Type:
Front (Port) Air Intake - Rear
Exhaust 1U Switches
CAUTION: Ensure the required
airflow for safe operation of
equipment is not compromised
when installing the Geist SwitchAir
device.
WARNING: Take precaution to
avoid interference with the switch’s
input power cords when installing
behind a live switch.
1. Installing the airflow
channels
Using customer-provided
hardware, insert the cage nuts
into the four holes on the front
of the channel.
Select a 2U space in the rack.
With the channel facing the
centerline of the rack, hold the
channel on the inside of the left
rack upright. Fasten in place
using screws only in the top and
bottom holes of the 2U space.
Repeat the procedure to install
the airflow channel on the
opposite side.
2. Installing the switch
Slide the network switch into
the bottom 1U at the rear of the
rack’s 2U space. Using
customer-provided cage nuts
and screws, mount the switch
to the rear rack uprights.
Geist Network Switch Installation
Geist SwitchAir Airflow Management Device
Geist SwitchAir Rack Rail Installation
1
Left front
rack upright
Top and bottom
screws of 2U space
CENTERLINE
OF RACK
2
Cage nuts x4
RACK
FRONT
RACK
REAR
Left rear
rack upright
Network
switch
RACK
FRONT
RACK
REAR
Side airflow
channel
Side airflow
channel
GEIST™ SWITCHAIR AIRFLOW MANAGEMENT DEVICE
Quick Installation Guide
2 VM1180/590-2244-501A
RACK
FRONT
RACK
REAR
3. Installing the air trunk
Insert the air trunk between the
channels on top of the network
switch. Slide the stabilizing tabs
into the opening on each
channel. Using customer-
provided hardware, attach the
air trunk to the rack.
4. Installing the wipers
Orient each SwitchAir wiper
with the tab facing away from
the centerline of the device.
Attach each wiper using the
provided screws.
3
Wiper
Wiper tab
Geist SwitchAir Wiper Installation
CENTERLINE
OF DEVICE
Geist SwitchAir Air Trunk Installation
4
Stabilizing
tab
Side airflow
channel
Network switch
Air trunk
Side airflow
channel

Produkt Specifikationer

Mærke: Emerson
Kategori: Ikke kategoriseret
Model: SA2-004

Har du brug for hjælp?

Hvis du har brug for hjælp til Emerson SA2-004 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Emerson Manualer

Emerson

Emerson FAT2835 Manual

1 Juli 2025
Emerson

Emerson FAO1605 Manual

1 Juli 2025
Emerson

Emerson MW9255W Manual

30 Juni 2025
Emerson

Emerson MW7302W Manual

27 Juni 2025
Emerson

Emerson SH1501 Manual

23 Juni 2025
Emerson

Emerson CKD8300 Manual

27 December 2024
Emerson

Emerson CR175W Manual

27 December 2024
Emerson

Emerson CKD9906 Manual

27 December 2024
Emerson

Emerson PB1001B Manual

10 December 2024
Emerson

Emerson PBW1010B Manual

10 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Navman

Navman MY500XT Manual

1 August 2025
Navman

Navman FOCUS150 GPS Manual

1 August 2025
Scheppach

Scheppach TW1000 Manual

1 August 2025
Navman

Navman MiVue 750 WIFI Manual

1 August 2025
Navman

Navman MiVue Drive FHD Manual

1 August 2025
Midea

Midea MEC64 Manual

1 August 2025
Navman

Navman MY50T Manual

1 August 2025
Navman

Navman M100 Manual

1 August 2025
Navman

Navman MiVue 770 SAFETY Manual

1 August 2025
Navman

Navman MiVue 790 Manual

1 August 2025