2
1
GB | Digital Bathroom Scale
Read these instructions carefully before rst use of the product.
Technical Specications
Toughened safety glass: 5 mm
LCD display: 75 × 29 mm
Maximum load capacity: 180 kg (3–180 kg)
Measurement resolution: 0.1 kg
Unit of measure: kg/lb/st
Automatic switch-o after 10 seconds
Power supply: 2× 1.5 V AAA batteries (included)
Display Description
„Lo“ – batteries low. Low batteries should be removed immediately to prevent damage to the scale.
„Err“ – scale overloaded, maximum load capacity is 180 kg. Leave the scale to avoid damaging them.
Button Description
Underside (see g. 1)
1 – UNIT button
2 – battery compartment
Weighing
1. Place the scale on a at, hard and stable surface.
2. Carefully step onto the scale – the scale turn on automatically.
3. Stand still on the scale and don‘t move – after a moment, the display will show the measured weight.
4. You can change the unit of weight between kg/lb/st by repeatedly pressing the UNIT button on the underside of the scale.
You can change the setting even before turning on the scale.
5. After 10 seconds, the scale turn o automatically.
Changing Batteries
1. Open the battery compartment cover on the underside of the scale.
2. Remove the depleted batteries.
3. Insert new 2× 1.5 V AAA batteries. Make sure you observe the correct polarity. Use alkaline batteries only. Do not use
rechargeable batteries.
4. Close the cover.
Cleaning and Maintenance
1. Clean the scale using a moist cloth and make sure water does not enter the interior of the scale. Keep the glass surface
dry. Do not use chemical detergents or detergents with abrasive eect.
2. Do not submerse the scale in water!
3. Always keep the scale in horizontal position.
4. If the scale cannot be turned on, verify that batteries are inserted and that they are not drained.
5. If an error is displayed or the scale won‘t turn on, remove the batteries and reinsert them after approx. 5 seconds.
1 2
