Emphasys IW6.0 Manual

Emphasys Højttaler IW6.0

Læs gratis den danske manual til Emphasys IW6.0 (4 sider) i kategorien Højttaler. Denne vejledning er vurderet som hjælpsom af 49 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 25 anmeldelser. Har du et spørgsmål om Emphasys IW6.0, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

I n - Wa l l S p e a k e r s

from EMPHASYS are designed and built

to the highest standards of integrity for

superior durability and power handling.

The IW8.5 offers an 8" aluminum woofer

and pivoting 1” aluminum dome tweeter

for thundering bass, detailed highs and

awesome projection. The IW6.7 has a

61⁄2" aluminum woofer and 1" aluminum

dome tweeter. Additionally, these mod-

els are equipped with boost switches

for bass and treble, making it possible

to tune the speaker response to room

acoustics and listener preferences. The

other models in the series offer com-

binations of soft dome tweeters and

polypropylene woofers for smooth, life-

like response. For home theater and dis-

tributed stereo, in rooms large or small,

the In-Wall Series from EMPHASYS has

it covered.

Positioning the Speakers

EMPHASYS In-Wall Speakers can be used in any

position of a home theater speaker system. A

single speaker can be used for the front center

channel, or a pair can be used for left and right

at the front or rear in the system.

The In-Wall Speaker as a

Center Channel

In-Wall Speakers are designed to blend

seamlessly with other EMPHASYS speakers and

accessories, and to ﬁll the speciﬁc needs of

any conﬁguration. To use the In-Wall Speaker for the center channel, be sure to install

it directly above (or below) the TV. Preferably, it should be ﬂush with the screen. The

performance of the entire system will be enhanced if the center channel is aligned as

closely as possible with the horizontal plane of the front left and right speakers.

Using In-Walls as Left and Right Speakers

The In-Wall Speaker, when used in the front left and right positions, should preferably

be installed in vertical orientation with the tweeter above the woofer. To install the

speakers horizontally, be sure the tweeters are located toward the center of the sound

ﬁeld, with the respective left and right tweeters nearest the TV.

EMPHASYS

Installer's Guide

IW8.5 IW6.7 IW6.5 IW6.0

3. Mark the hole. A template for setting the hole is provided in

the box. Position the template in the desired position and outline

it on the wall using a pencil.

4. Cut the hole. CAUTION: This is the most important part of the

installation. If you aren’t certain whether there are any obstruc-

tions in the desired mounting area, use a drywall saw to cut a

small hole at the center of the spot you’ve outlined. Cut at a 45°

angle toward the inside of the hole (See Diagram 3).

You can use the cutout piece to ﬁll the hole again if obstructions

are found. Once the mounting location is deemed to be free of

obstructions, cut the outline at a 90° angle relative to the sur-

face of the wall.

5. If the area in the wall isn’t already insulated, add insulation

material sufﬁcient to ﬁll the cavity. If the insulation material used

is faced with foil or paper, position the foil or paper away from

the speaker.

CAUTION: Speaker components can get hot while playing music at

moderate to high volume levels. There should be nothing at all touch-

ing the speaker. Material in proximity to the back of the speaker must

have at a minimum 1” or 26mm clearance for non-ﬂammable materials

and more for ﬂammable materials like plastic vapor barriers.

Preparing the Surface for Mounting

Precautions for Installation

Careful consideration should be given to the possible presence of

electrical conduits, piping, HVAC duct work and other elements

within the walls before the speakers are installed. If there is any

doubt regarding the most acceptable locations for the speakers,

please consult EMPHASYS Technical Support or the dealer.

New Construction: Unﬁnished Wall

A new construction bracket, available from your dealer, can be

installed prior to drywall application across studs (up to 24” on-

center) where a speaker will be located. Once the hole is cut and

the drywall is installed, the speaker can be easily installed follow-

ing the instructions for mounting in “Finished Wall” below.

Finished Wall

Prior to the actual installation of the speakers, it will be necessary

to run speaker wire to the locations in which they’ll be mounted.

See your dealer for more information. Then, with the wire in

place, the speakers can be mounted. To ensure a professional

looking result, follow the simple steps described below:

1. Choose the general location for the installation of each speak-

er, being certain that these areas present no obstructions such as

electrical conduit, HVAC duct work or water lines.

2. Find the studs nearest the desired location for the speaker.

EMPHASYS recommends the use of a good stud ﬁnder for this

procedure. If you are lining up the speakers to some other object

or molding in the room, be sure to allow for the size of the bafﬂe,

which, extends beyond the mounting hole on all four sides of the

In-Wall Speaker.

CAUTION: The tweeter dome, whether aluminum or silk, can be

damaged through direct contact with ﬁngers or objects. Please be

careful when installing and adjusting the speaker.

The following tips are recommended for use of the In-Wall

Speakers in a home theater conﬁguration:

• If the speaker is being used as a main front channel, the tweeter

should be aimed toward the listener.

• If the speaker is being used as a rear surround speaker, it might

be desirable to aim the tweeter away from the listener. This will

enhance the diffusion of the sound, particularly for ambient

effects.

Speaker Adjustments

Creating a Zone for Optimized Listening

The speakers should be placed so that

they form a “triangular” relationship

with respect to the listening position.

(See Diagram 1) For example, if the

listener’s vantage point is eight feet

from the front speakers, then the

speakers should be eight feet apart.

This will ensure an accurate stereo

image and help minimize the creation

of excessive sound reﬂections.

Pivoting the Tweeters

Some models of the In-Wall Series speakers are equipped with

pivoting tweeters that make it easy to optimize speaker perfor-

mance to the size and shape of the room. (See Diagram 2) For

example, if the speakers are positioned far from the primary

listening area, aim the tweeters directly toward that area so that

the upper frequencies (which are directional in nature) reach the

listener. If the ideal listening perspective is relatively close to the

speakers, a better balance of frequencies can be achieved by

aiming the tweeters slightly outward, away from the listener.

Diagram 2:

Tweeter

Push Tweeter Here

A=B=C

Ideal

Listening

Zone

B C

Left Speaker Right Speaker Center Speaker

TOP VIEW

Diagram 1: Listening Zone

Diagram 3:

Wall Cutout

Produkt Specifikationer

Mærke:	Emphasys
Kategori:	Højttaler
Model:	IW6.0

Har du brug for hjælp?

Hvis du har brug for hjælp til Emphasys IW6.0 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Højttaler Emphasys Manualer

Emphasys DC6.0 Manual

15 September 2024

Emphasys IW6.0 Manual

19 Juli 2024

Emphasys IC6.0 Manual

19 Juli 2024

Højttaler Manualer

Nyeste Højttaler Manualer

Niceboy Orion Manual

12 August 2025

PSB SubSeries BP12 Manual

12 August 2025

Tannoy CVS 401X Manual

12 August 2025

Moonki MW-T400 Manual

12 August 2025

Klipsch Reference RS-3 II Manual

12 August 2025

Phonic JUBI 15AR Manual

12 August 2025

Crosley Mini Boombox CR3050A Manual

12 August 2025

Moonki MW-T520 Manual

12 August 2025

Phonic JUBI 15 Manual

12 August 2025

Phonic JUBI 12AR Manual

12 August 2025