Empirical Labs Mike-E Manual

Empirical Labs Ikke kategoriseret Mike-E

Læs gratis den danske manual til Empirical Labs Mike-E (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 60 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 30.5 anmeldelser. Har du et spørgsmål om Empirical Labs Mike-E, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

Mic Preamp With Some New Tricks

INDEX

Page Item

1 Features & Specs

2 What Is Mike-E?

2 Using for the First Time –

oSetting Mic Gain! – The “Clip Test”

3-6 Example Settings of the EQ

7-8 Recall Sheet

9 Example Settings (Continued)

9 Mike-E Pet Tricks

10 Wiring & Cable Facts

10 Options & Upgrades

11 Block Diagram

11 Section Details

12 Section Details (Continued)

12 Mix Control

13 Stereo Operation (Using the Link Comp)

13 Fuse Replacement, and AC Voltage Select

13 Troubleshooting

14 Customer Comments

15 Warranty (Rear Cover)

Empirical Labs - Technology for the Artist

Empirical

Labs

OUT

Line

20 25 30 35 40 45 50 55

Bad!

Clip

INST.

(Auto Sense) 80Hz

48V!

Toasty

Warm

HF Emphasis

Link Comp

BYP Nuke

1:1

2:1 4:1

8:1

Dry

.25

.05

100mS

.9mS

PHANT COMP MODE

16 13 10 8 5 3 1

RATIO ATTACK RELEASE

MIX

Comp

PHASE

GAIN (dB) mS SecRatio

(Hi-Z)

DRIVE

467

Features

 Mic Pre-Amplifier, Empirical Labs style. With its totally unique features, we think its the

“deepest” and most versatile Mic preamplifier in existence. Yet still offers ease of use.

 Super high performance Mic Pre-Amplifier section. Transformer Input. The Signal to

noise exceeds 130dB… far, far below the self noise of any microphone.

 Super Long Life gain Switching, 5 dB increments in Preamp section, with output pot for

fine resolution gain setting. Sealed relays used throughout.

 “CompSat” Section that can not only soft saturate the peaks of waveforms to warm

things up, but also offers a world class compressor with detented parameter selection.

 Germanium circuitry in the CompSat section to offer new warming characteristics.

 One of a kind Emphasis function, tames high frequency pileups, while offering frequency

dependant saturation. Enhances Mike-E’s popular tape-like tone.

 High performance High Pass filter at 80Hz, 18dB per octave.

 Built in Instrument Preamp/Direct box – Just plug a guitar or bass etc into the front panel and

the unit auto-senses it. Voila you have a high performance Empirical Labs direct box. The

signal is then passed through the input transformer for some “IRON” in its sound.

 Renowned Empirical Labs digitally controlled analog topology.

 Huge "DISTRESSOR" knobs with high resolution numbering - For easy readability and

repeatable settings. They also go to 10 1/2 .

 A “BAD!” Hard Clip Indicator lights – A “Bad” Clip LED that lets user know he is within .5dB

of hard clipping. It monitors many sections of the Preamp for internal clipping.

 Two CompSat LED indicators, one “WARM” and one “TOASTY” LED, indicating internal

saturation circuitry.

 Locked, calibrated, output level - Allows speed in setting record and live mix levels.

 Extremely useful as a mixdown processor, too. Great for fitting the mixes together.

 Single height and light weight

 Discrete and integrated combination -The best of speed/linearity with repeatability. Hand

tested & selected components. All metal film and Roederstein resistors in the audio path - top

quality components, most being high temperature military spec parts.

 U

CCllaassssAAttrraannssffoorrmmeerroouuttppuuttttooggiivveeyyoouuaanniissoollaatteeddoouuttppuuttwwiitthhtthheewwoonnddeerrffuullssoofftt

ssaattuurraattiioonnaannddbbeeeeffyylloowweennddtthhaat

 Switchable 115/230 volt operation - Extra fuse provided inside unit.

 XLR and 1/4" phone ins and outs - XLR fully balanced design, pin 2 hot.

 No internal connectors, high reliability parts and military grade switches and relays. All contacts

doubled up for maximum reliability.

 Linkable Compressor section

 Interface and features found nowhere else.

 Hand wired, calibrated in USA. Shipping weight 14 Lbs.

Specs

♦ Freq. Response is 3 Hz to 200 kHz on (No CompSat). CompSat is 3Hz – 150Khz.

♦ Signal to Noise - 130 dB signal to Noise.at 40dB gain. Maximum output is +28dBu.

♦ Distortion Ranges between .0006% and 15% depending on mode and settings.

♦ Transformer coupled Input, Active and Transformer Outputs, available.

♦ Maximum Input Level before clipping is 23dBu.

♦ Input Impedance is 600 Ohms. Output impedance is less than 38 ohms.

♦ Attack/Decay Ranges - .9 – 100mS attack. .15 – 1 Sec.

♦ Power Consumption – 15 Watts Max.

♦ Shipping Wieght – 14lbs

Empirical Labs - Something Old, Something New

BACK TO TABLE OF CONTENTS

Produkt Specifikationer

Mærke:	Empirical Labs
Kategori:	Ikke kategoriseret
Model:	Mike-E

Har du brug for hjælp?

Hvis du har brug for hjælp til Empirical Labs Mike-E stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Empirical Labs Manualer

Empirical Labs Mike-E Manual

2 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

10 Oktober 2025

10 Oktober 2025

10 Oktober 2025

10 Oktober 2025

Oras Saga 3970 Manual

10 Oktober 2025

TOA AT-4030B-EB Manual

10 Oktober 2025

TOA VX-030DA Manual

10 Oktober 2025

TOA RS-481 Manual

10 Oktober 2025

TOA AT-4200B-EB Manual

10 Oktober 2025

Xerox DocuShare Manual

10 Oktober 2025