Engl Screamer 50 Manual

Engl forstærker Screamer 50

Læs gratis den danske manual til Engl Screamer 50 (6 sider) i kategorien forstærker. Denne vejledning er vurderet som hjælpsom af 16 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 8.5 anmeldelser. Har du et spørgsmål om Engl Screamer 50, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
Please, first read this manual carefully!
Operator´s Manual
Guitar-Amplifier
Screamer 50
Tube
Amp
1 Input: Input¼" unbalanced input. Plug your guitar cord in here.
2 Clean: Input sensitivity control (Gain) for the Clean and the Crunch channels.
(Clean: set the Gain-button 11 to the Lo position, Crunch: set the Gain-button 11 to the Hi position).
A TIP from the Designer: Gain settings depend on what type of pickups are installed in your guitar.
The recommended setting for humbuckers or active pickups lies between the 10 and 1 o’clock
positions and 12 to 3 o’clock for single coils for a pure clean response; the Gain button must be in
the OFF-position.
3 Bright: Alters the EQ by boosting the upper treble range; effectiveness decreases at higher
Gain (2,4) settings; the Bright feature affects all channels.
A TIP from the Designer: For a crisp glassy tone, set the Bright switch to the On position. This
setting boosts the treble response of muddy pickups.
4 Lead: Gain control pot for the Soft Lead channel and the Heavy Lead channel. It controls the amount
of preamp overdrive in the Lead mode. (Soft Lead: set the Gain-button 11 to the Lo position, Heavy
Lead: set the Gain-button to the Hi position).
CAUTION: Extremely high gain and volume levels in the Lead mode can produce
strong feedback. Avoid feedback squeals, they lead to hearing loss and damaged speakers!
A TIP from the Designer: To get Crunch-sounds and Rhythm-sounds set this control between
the 9 and 12 o´clock´s position (depending on the type of pick-up) and leave the Gain 11 pusbutton
in the Off-position.
5 Bass: Bottom end voicing control of the preamps´s passive EQ.
6 Middle: Mid-range voicing control of the preamp´s passive EQ.
7 Treble: Upper range voicing control of the preamp´s passive EQ.
A TIP from the Designer: To get an idea of this amp's capabilities, I suggest you set the tone control
pots Bass (5), Middle (6), Treble (7) and Lead Presence (8) to the 12 o'clock position. For extremely
soft lead, blues or jazz sounds, try setting the Treble knob to somewhere in the 8-to-11 o'clock range.
For aggressive metal riffs or spanky funk sounds, go for something in the range of 11 to 3 o'clock.
8 Lead Presence: This control defines the Treble response in the poweramp stage for
the Lead channel.
A TIP from the Designer: When you've adjusted the amp to relatively loud levels and high Gain
settings reduce the amount of Lead Presence (8) and Treble (7) to prevent annoying feedback that is
generated when your guitar's pickups and the speaker interact—something in the 8-to-12 o'clock
range should do just fine.
9 Reverb: Reverb control, adjusts the portion of the reverb signal and increases reverb intensity
if you rotate it clockwise; the reverb can be switched on/off via the respective footswitch connected
to jack 19 or 21.
Frontpanel
1234 5678910
11 13 14
12
Screamer 50 - delivers the sonic goods—tons of tone and palette of hip sounds from squeaky clean
to hi-gain shred and everything in between. This all-tube beast is your first choice for many different
sound styles! With a host of practical features and a clearly-arranged control panel, handling this amp is a
piece of cake. The Screamer's opulent visuals are certainly arresting, but its unique, creamy tube tone and
silky spring reverb truly set this amplifier apart. The Screamer comes complete with a bit of technical
wizardry which you'll find useful where it counts most—out there in the real world of rehearsing and
gigging. Among these features are a Lo/Hi Gain switch, which in effect doubles your choice of channels
from two—Clean and Lead—to four—the afore-mentioned, plus Crunch and Heavy Lead. You also get two
different connection systems for different footswitches-conventional ¼" jacks as well as a port for the
ENGL compact footswitch Z-5 (optional). And then there's the ingenious feature "V.L.S.", an adapted
version of the extremely popular and highly practical Master A/B switching circuit found on high-end
ENGL heads.
Quality components, excellent workmanship and strict quality control ensure this amp retains its value.
You'll find guidelines on care and maintenance of tube amps on the last page of the manual.
Please read and heed these before operating your amp. You'll also come across boxes shaded grey
throughout the manual. These are located between the descriptions of the amp's functions and
contain handy tips on the preceding function. All critical information pertaining to the operation of
this amp is preceded by "NOTE" or "CAUTION." Please pay particular attention to these safety tips.
The ENGL team wishes you all the best—may you and your amp enjoy a "harmonically rich" future
together!
Clean
Lead
Reverb Lead
Volume MasterClean Lead Bass Middle Treble
PowerStand By
Bright
Screamer 50
Gain
Lo/Hi
Amp
Tub e
Input
15
Lead
Presence

Produkt Specifikationer

Mærke: Engl
Kategori: forstærker
Model: Screamer 50

Har du brug for hjælp?

Hvis du har brug for hjælp til Engl Screamer 50 stil et spørgsmål nedenfor, og andre brugere vil svare dig


forstærker Engl Manualer

Engl

Engl Screamer 50 Manual

26 August 2024

forstærker Manualer

Nyeste forstærker Manualer

Advance Acoustic

Advance Acoustic MPP-505 Manual

15 Januar 2025
Samson

Samson MXS3000 Manual

14 Januar 2025
Marantz

Marantz PM-11S3 Manual

11 Januar 2025
Bluetech

Bluetech Hi series Manual

22 September 2024
Advance Acoustic

Advance Acoustic MAP-308 Manual

18 September 2024
Marantz

Marantz PM-12 SE Manual

29 August 2024
Marshall

Marshall Code 25 Manual

26 August 2024
Marshall

Marshall Code - PEDL-91009 Manual

26 August 2024
DAP-Audio

DAP-Audio Palladium Vintage P1200 Manual

26 August 2024
DAP-Audio

DAP-Audio Palladium P2000 Manual

26 August 2024