Marshall Code - PEDL-91009 Manual

Marshall forstærker Code - PEDL-91009

Læs gratis den danske manual til Marshall Code - PEDL-91009 (9 sider) i kategorien forstærker. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Marshall Code - PEDL-91009, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/9

PROGRAMMABLE FOOTCONTROLLER

OWNER’S MANUAL

COMPLIANCE STATEMENT

ENGLISH

The CODE footcontroller (PEDL-91009) has two Modes of operation: PRESET Mode and SWITCH Mode. NOTE: The footcontroller will always power on in Preset Mode.

SWITCH MODE

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)

This device must accept any interference received, including

interference that may cause undesired operation.

Warning: Changes or modications to this unit not expressly

approved by the party responsible for compliance could void

the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected. Consult the dealer

or an experienced radio/TV technician for help.

- To reinitialise your CODE footcontroller simply unplug and re-plug

the cable.

Industry Canada caution.

This device complies with Industry Canada licence-exempt

RSS standard(s).

Operation is subject to the following two conditions:

(1) This device may not cause interference, and (2) This device

must accept any interference, including interference that may

cause undesired operation of the device.

Francais:

Le présent appareil est conforme aux CNR d’Industrie

Canada applicables aux appareils radio exempts de licence.

L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur

de l’appareil doit accepter tout brouillage radio électrique subi,

même si le brouillage est susceptible d’en compromettre le

fonctionnement.

SWITCH Mode enables you to use footcon-

troller buttons 1 – 3 to activate or deactivate

assigned Section Switches and functions on the

amplier’s panel.

To enter SWITCH Mode from PRESET Mode,

press and hold any of the footcontroller but-

tons: 1 - 3.

NOTE: Press and hold the currently active but-

ton to change Mode without changing Preset.

Press and hold either of the remaining buttons

to change Mode while activating that button’s

assigned Preset.

The footcontroller display will show the Preset

number that you are currently on.

The three ASSIGNED SWITCH LEDs on the

right side of the footcontroller show the status

of the corresponding Section Switch: 1, 2 and

3. Red means the Section Switch is active, and

Green means it is inactive.

NOTE: The TAP Delay LED will ash red in time

with the current Tap Tempo Delay setting.

Footcontroller button 1 – 3 default Section

Switch assignment is:

1. PRE FX 2. MOD 3. DEL

To change the default Section Switch

assignments:

• Ensure the footcontroller is in SWITCH

mode.

• Press and hold your desired Section Switch

or Tuner/Tap Tempo function on the amplier

panel and then immediately select and

release the footcontroller button that you

wish to assign: 1 - 3.

• Your selected Section Switch or Tuner/

Tap Tempo function will now be assigned to

the corresponding footcontroller button.

• When you have assigned a panel function to

a footcontroller button, pressing EXIT/STORE

will return you to the main Preset screen.

• To overwrite it, repeat this process.

NOTE: To exit SWITCH Mode and return to

PRESET Mode, press the BANK footcontroller

button.

PRESET MODE

PRESET Mode enables you to assign any of

CODE’s 100 Presets to 30 locations within

the footcontroller. That’s ten Banks, each

containing three Presets.

The footcontroller’s two-digit display shows

on its left the BANK that you are currently

on (A –J), and on its right it shows the Preset

location NUMBER you are currently on: 1, 2

or 3, which correspond with footcontroller

buttons 1, 2 and 3.

The fourth footcontroller button selects the

BANK. Press once to increment the BANK.

Press and hold to decrement the BANK.

When you have selected your BANK, the

location NUMBER will ash on the display,

indicating a location has not been chosen.

Press footcontroller button 1 – 3 to select

your location.

Storing a Preset to a footcontroller location:

• Select a Preset on your CODE amplier

that you wish to store to the footcontroller.

• Choose a location on the footcontroller

that you wish to store to: BANK A - J.

• While holding down the EXIT/STORE

switch on the amplier panel, press and

release the desired button on the

footcontroller: 1 - 3.

• Your chosen Preset will now be recalled

when you select that footcontroller location.

Produkt Specifikationer

Mærke:	Marshall
Kategori:	forstærker
Model:	Code - PEDL-91009

Har du brug for hjælp?

Hvis du har brug for hjælp til Marshall Code - PEDL-91009 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

forstærker Marshall Manualer

Marshall Code 25 Manual

26 August 2024

Marshall Code - PEDL-91009 Manual

26 August 2024

forstærker Manualer

Nyeste forstærker Manualer

Advance Acoustic MPP-505 Manual

15 Januar 2025

Samson MXS3000 Manual

14 Januar 2025

Marantz PM-11S3 Manual

11 Januar 2025

Bluetech Hi series Manual

22 September 2024

Advance Acoustic MAP-308 Manual

18 September 2024

Marantz PM-12 SE Manual

29 August 2024

DAP-Audio Palladium Vintage P1200 Manual

26 August 2024

Engl Screamer 50 Manual

26 August 2024

DAP-Audio Palladium P2000 Manual

26 August 2024

DAP-Audio Palladium P900 Manual

26 August 2024