Epson C823312 Manual

Epson Printer C823312

Læs gratis den danske manual til Epson C823312 (76 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 7 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 4 anmeldelser. Har du et spørgsmål om Epson C823312, eller vil du spørge andre brugere om produktet?

Side 1/76
User’s Guide Update
Please update your EPSON Type B Ethernet Interface Card
(C82332*) User’s Guide with the following information:
The Type B Ethernet Interface Card is also referred to as the
Multi-protocol Ethernet Interface Card. You may notice this
name when ordering, for example.
The Type B Ethernet interface card can be installed in ink jet
printers, as well as laser and dot matrix printers.
Although the manual states that your printer must support
PostScript printing, you can use the Ethernet interface card
in any EPSON Stylus ink jet printer that has a Type B option
slot.
If you are using your printer in an Apple Ethertalk network,
you need to use the EPSON Namer program to rename it, as
described on page 3-2. However, please note that the
EPSON Namer program is on the printer driver diskette
that came with your printer, not on the EPSON Net! for
Macintosh diskette, as mentioned in your manual.
Copyright © 1995 by Epson America, Inc.
Torrance, California, USA
8/95
cpd-3018
Product Update for EPSON PostScript
Printer Users
This update applies only to networks that include EPSON
PostScript
®
printers.
Note:
If your network does not include Macintosh
®
workstations, please disregard
this update. No additional settings need to be made.
Your C82331* Ethernet Interface Card cannot automatically switch
between AppleTalk
®
and non-AppleTalk PostScript printing
environments. You first need to configure your printer for AppleTalk
or non-AppleTalk PostScript printing with the AppleTalk PS option
in the Epson Zoner utility. The Epson Zoner dialog box shown on
page 3-7 of your User’s Guide should appear as follows:
To configure your printer, see the appropriate section below.
For non-AppleTalk PostScript printer support
Make sure the AppleTalk PS option in Epson Zoner is set to
Inactive (default setting).
For AppleTalk PostScript printer support
Be sure to change the AppleTalk I’S option in Epson Zoner to
Active.
After changing the AppleTalk PS option, click the Set button and
wait for at least 30 seconds before rebooting your printer.
Copyright © 1995 by Seiko Epson Corporation 4004273
Printed In Japan 95.02.1 EH3-00


Produkt Specifikationer

Mærke: Epson
Kategori: Printer
Model: C823312

Har du brug for hjælp?

Hvis du har brug for hjælp til Epson C823312 stil et spørgsmål nedenfor, og andre brugere vil svare dig