Safety Precautions
DANGER
• Failure to comply with these safety precautions results in death or serious injury;
• ELECTRICAL SHOCK HAZARD! Always turn o, disconnect, and disengage all power
sources to the projector before servicing;
WARNING
Failure to comply with these safety precautions may result in serious injury.
• At least two qualied people should perform the installation procedure. Personal injury
and/or property damage can result from dropping or mishandling the projector;
• If mounting to ceiling studs, make sure that the mounting screws are anchored into the
center of the ceiling studs. Use of an edge- -edge stud nder is recommended; to
• Be aware of the mounting environment. If drilling and/or cutting into the mounting
surface, always make sure that there are no electrical wires in the wall;
• Do not install near sources of high heat. Do not install on a structure that is prone to
vibration, movement or chance of impact.
INSTALLATION SAFETY
KITE can only be used by skilled sta who also have the authorization to TRANSPORT,
INSTALL and ADJUST the projector in complete safety based on the necessary
knowledge and competence.
In order to avoid injuries, it is necessary to comply with the following safety rules:
• Use KITE with a projector or projector’s cage only in environments which are not
exposed to weather events.
• Make sure the projector is compatible with the cage on which it is tted, as using
incompatible projectors could cause serious damages and injuries.
• Do not place KITE on: unstable surfaces, walls or unsuitable structures.
• For STACKING, make sure all safety PINS are fastened with their safety locks, then
make sure all nuts are tightened correctly onto the threaded PINS.
• Do not mount KITE or the projector when people are standing underneath the
installation area.