Epson Stylus Color 200 Manual

Epson Printer Stylus Color 200

Læs gratis den danske manual til Epson Stylus Color 200 (16 sider) i kategorien Printer. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Epson Stylus Color 200, eller vil du spørge andre brugere om produktet?

Side 1/16
EPSON Stylus COLOR 200
Ink Jet Printers 6/96 EPSON Stylus COLOR 200-1
Printer Specifications
Printing
Printable columns and printing speed*:
* Print speeds (in characters per second) are estimated for color printing
on letter-sized paper and vary depending on system configuration,
software application, resolution, and amount of page covered.
Printing method: On-demand ink jet
Nozzle configuration: 64 monochrome (black) nozzles
(16 × 4 staggered)
60 color nozzles
(20 × 3, cyan, magenta, yellow)
Character pitch
(characters per inch)
Printable
columns
Printing speed
(characters per second)
Monochrome
Color
Normal Economy
10 80 125 167 200
12 96 150 200 240
15 120 188 250 300
17 (10 condensed) 136 214 285 342
20 (12 condensed) 160 250 333 400
Resolution: Maximum 360 dpi on a 720 × 720 dpi
matrix. Dots are printed in an
alternating pattern in which horizontal
and vertical dots are non-contiguous.
Contiguous printing of dots is available
only on the diagonal, which yields an
effective resolution greater than 360 dpi.
Paper feed speed: 102 milliseconds per 1/6-inch line
Input buffer: 2.5KB to 15KB depending on
monochrome or color head unit
selection
Print direction: Bidirectional with logic seeking for text
and graphics; unidirectional and
autodirectional modes available in
Default setting mode
Control code: ESC/P 2 and expanded raster graphics
code
Paper feeding: Auto sheet feeder
Line spacing: 1/6-inch, programmable in
1/360-inch increments
Character tables: 1 Italic and 8 graphics character tables
Character sets: 14 International and 1 legal character
sets
edge
guides
sheet
feeder
printer
cover
control panel
paper support
parallel interface
connector
power
switch
paper
t
hickness
lever
thickness
adjustment
lever
print head
unit release
lever
print head unit
ink
cartridge
clamp
EPSON Stylus COLOR 200
EPSON Stylus COLOR 200-2 6/96 Ink Jet Printers
Paper
Note:
Since the quality of any particular brand or type of paper may be
changed by the manufacturer at any time, EPSON cannot guarantee
the use of any particular brand or type of paper. Always test samples
of paper stock before purchasing large quantities or printing large jobs.
Envelopes:
Note:
Poor quality paper may reduce print quality and cause paper jams
and other problems. If you encounter problems, switch to a higher
grade of paper.
Print on special coated paper, high-quality glossy paper, envelopes,
and transparencies only under these normal conditions:
Temperature 59 to 77°F (15 to 25°C)
Humidity 40 to 60% RH
(High-quality glossy paper can be stored at 20 to 60% relative
humidity.)
Do not load curled or folded paper, envelopes, or transparencies.
The following EPSON genuine papers are available:
Special coated paper for 360 dpi printing (Letter) S041060
Special coated paper for 720 dpi printing (Letter) S041062
Special coated paper for 720 dpi printing (Legal) S041048
High-quality glossy paper (Letter) S041072
Transparency film (Letter) S041064
Iron-on transfer media (Letter) SE41001
Printable area:
Single sheets
Envelopes
A The minimum top margin is 0.12 inch (3.0 mm).
Note: When printing multiple sheets of glossy paper, the minimum top
margin is 1.2 inches (30mm)
BL The minimum left margin is 0.12 inch (3.0 mm).
BR The minimum right margin is:
0.12 inch (3.0 mm) for Statement and Executive paper
0.38 inch (9.7 mm) for Letter and Legal paper, and transparencies
0.15 inch (3.8 mm) for A4 paper
0.54 inch (13.8 mm) for DL envelopes
1.38 inches (35.1 mm) for #10 envelopes
C The minimum bottom margin is 0.54 inch (14.0 mm).
Note:
Always load paper into the sheet feeder short edge first except
envelopes. Load envelopes long edge first.
Paper path: Sheet feeder, top entry
Paper
capacity:
100 sheets of plain paper at 17 lb
(64 g/m2)
70 sheets of EPSON special coated paper
30 sheets of EPSON high-quality glossy paper*
50 transparency films*
10 envelopes
Paper size: Letter (8.5 × 11 inches)
A4 (210 × 297 mm)
B5 (176 × 250 mm)
Legal (8.5 × 14 inches)
Statement (8.5 × 5.5 inches)
Executive (7.5 × 10 inches)
Paper types: Plain paper and special papers distributed by
EPSON (high-quality glossy paper, special
coated paper, and transparencies)
Paper
thickness:
0.003 to 0.004 inch (0.08 to 0.11 mm)
Paper
weight:
17 to 24 lb (64 to 90 g/m2);
Use 24 lb (90 g/m2) paper under normal
temperature and humidity conditions.
* With one sheet of plain paper beneath the stack and printed one page
at a time
Size No. 10
DL
9.5 × 4.1 inches (240 × 104 mm)
8.7 × 4.3 inches (220 × 110 mm)
Paper types Plain, bond, or airmail paper
Paper thickness 0.006 to 0.02 inch (0.16 mm to 0.52 mm)
Paper weight 12 to 24 lb (45 to 90 g/m2)
Transparencies:
Size A4
Letter
(210 × 297 mm)
(8.5 × 11 inches)
Thickness 0.003 to 0.0033 inch (0.075 to 0.085 mm)
A
BR
C
BL
A
BL BR
C


Produkt Specifikationer

Mærke: Epson
Kategori: Printer
Model: Stylus Color 200

Har du brug for hjælp?

Hvis du har brug for hjælp til Epson Stylus Color 200 stil et spørgsmål nedenfor, og andre brugere vil svare dig