Compartment
Fill main-wash dete rgent.
Compartment
Fill pre-wash detergent.
(Follow the user instructions!)
Mechanical indicator
Check the rinse aid level
Load the baskets
Select a programme
Turn on the water tap and press the Start/Reset button. The machin e will start working
after a bout 10 seconds.
Running the dishwasher
Switch off the appliance
Turn off the water tap,
unload the baskets
Fill the detergent dispenser
Warning: wait a few minutes (about 15 mi n utes) before unloading the dishwasher to avoid handling
the dishes and utensils while they are still hot and more susceptible to break.
They will also dry better. Unload the appliance, starting from the lower basket.
Scrape off any large amount of leftover food. Soften remnants of burnt food in pans,
then load the baskets . Refer to the dishwashe r loadi ng instructions.
Close the door,press the Programme button until the selected programme lights up.
( See the section entitled Operation instruction )“ ”
When the working cycle has finished, the buzzer of the dishwasher will sound 8 times, then stop.
Turn off the appliance using the ON/OFF button.
Switch on the appliance Press the On/Off button to switch on the appliance, Open the door.
Electric indicator on control pane l (if pro vided).
For detailed operating method read the co rresponding content on t he instructio n manual.
Changing the programme
Add forgotten dishes in the
dishwasher.
If the appliance is switched
off during a wash cycle.
Open the door carefully.
Hot st eam m ay esc ape
when the door is opened!
If the ap pliance is switched off dur ing a wash cycle, when switched
on agai n, please re-s elect the washing cycle and opera te the dishwasher
according to th e original Power-on state.
1.Open the door a littl e to sto p the dishwasher .
2.After the spray arm s stop w orking, you can open the door completely.
3.Add the forgotten d ishes.
4.Close the door, the dishwasher wi ll start running again after 10 se c onds.
1. A running cycle can only be modified if it has been running for a short time. Otherwise the detergent
may have already been released and the water already drained. If this is th e case, the de tergent
dispenser must be refilled.
2. Press the Start/R eset button for more than 3 second s to cancel the running programme.
3. Select a new programme.
4. Restart the dishwasher.
AB
C
