Eurotronic PROGmatic Manual

Eurotronic Termostat PROGmatic

Læs gratis den danske manual til Eurotronic PROGmatic (2 sider) i kategorien Termostat. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Eurotronic PROGmatic, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

The convenient programming stick

Operating instructions and guarantee

Carefully read through this operating manual before using the

programming stick. Store the documents so you can consult them

later and pass them on when forwarding the appliance.

Scope of delivery

1x PROGmatic programming stick

1x operating instructions

Intended use

PROGmatic is used for the simple programming of the EUROtronic

energy-saving regulator with a programming port. The program-

ming stick is intended for use at the USB port of a PC. The data

is transferred to the energy saving regulator through the plug on

the Progmatic. The EUROtronic programming port at the energy

saving regulator is only intended for EUROtronic products. Do not

under any circumstance connect other devices with the Mini-USB

connection! Programatic Blue is not suitable as a transportable

storage media.

Operating and display elements

1 USB plug

2 plugs for the EUROtronic Programming-Port

3 LED red/green

PROGmatic function

PROGmatic enables the convenient stipulation of the heating and

saving times for the EUROtronic energy saving regulator at the PC.

After the storage of the space proﬁ les they can be conveniently

be stored on all the EUROtronic energy saving regulators with the

programming port. In this case the energy saving controller also

assumes the current time and the date so that an initial installation

of the energy saving regulator ceases to apply.

Installation of the PROGmatic software (initial operation)

Download the software for your PROGmatic programming stick from

www.eurotronic.org: Hover your mouse over the „Products“ tab,

navigate to the „Accessories“ item and click on „Progmatic“. On this

page, download the PROGmatic installation software and install it on

your computer. Once you have downloaded the software by clicking

on the link a window is automatically opened which helps your during

the installation of the programme.

1. Select your chosen language

2. Select a storage location

3. Click on “Install”

4. Click on “complete”

You launch the software by double clicking on the „PROGmatic-

start“ icon. The driver installation is performed automatically by

plugging in the stick.

Starting the PROGmatic

Plug the PROGmatic with the USB plug into a free USB port of your

PC. If the stick is connected correctly the green LED shines and

the red LED also shines upon its initial commissioning. In addition

the green strip at the lower edge of the programme changes to

green and reads „connected, PROGmatic is thus active. If the stick

has been connected to the computer the internal accumulator is

charged during this period. If the heating proﬁ les were successfully

transferred to the Progmatic then they shall remain stored on the

Progmatic for approx. 1 hour. If you should additionally at tempt to

transfer heating proﬁ les to the controller then the date and time may

be lost. Check this by connecting Progmatic with your computer once

more. If the red LED ﬂ ashes the proﬁ les must be transferred once

more to update the date and time. If the transfer was successful the

red LED switches off.

Batteries are not necessary.

Creation of room profiles

During the ﬁ rst launch of the programme the room proﬁ le I „P01“ is

already set as the factory setting. The individual room proﬁ les can

be issued with names to provide a better overview.

2) Simply enter the desired name into the intended ﬁ eld. You conﬁ rm

your entry by pressing „OK“. The room that has been created then

appears on the left of the programme.

3) Click on the „+“ symbol to add more rooms. A maximum of 10

rooms can be created. Now selected a room that has been created

and set an economy temperature, comfort temperature and offset

temperature.

4) Setting of the comfort and economy temperature

You can conveniently set the desired comfort and savings tempera-

ture into the corresponding ﬁ elds above the room proﬁ le range by

clicking on the cursor keys.

5) Setting of the offset temperature

Due to the fact the temperature is measured at the radiator it can

also differ at another place in the room. You can set the offset to

bring this in line. If for example you measure 19°C instead of the

21°C that was set, you then set the offset to 2°C.

Weekday option

Above the time bar you have the option with various buttons to

programme all the days individually or to arrange them in blocks:

Individual days - every day is assigned an individual heating/

savings proﬁ le.

Monday to Friday - The days Monday, Tuesday, Wednesday,

Thursday and Friday are assigned the same heating/saving proﬁ le.

Saturday to Sunday - The days Saturday and Sunday are assigned

the same heating/saving proﬁ le.

Creation of a heating time

In insert a heating time (comfort time) simply move the mouse to the

desire starting time and move it from left to right whilst pressing the

left mouse button. The end of the heating time is set by releasing

the mouse button. This is optically represented by a dark green bar.

Proceed in just the same way to create an additional heating time.

Deletion and changing of a heating time

The deletion of a heating time works in a similar manner to the

setting of the heating time, keep the right mouse button pressed

for this and move it from left to right. If the desired area is selected

this area will be deleted by releasing the mouse button.

Saving of the room profiles

Following the completion of the programming of your room proﬁ les

you save them with the „Save“ button or via the „Save“ selection

in the „File“ menu. A window is opened in which you can select

several options.

1. Save on the computer

to save your various heating proﬁ les and to be able to access if

there are change requests.

2. Save on the Progmatic

to transfer your different heating proﬁ les to your energy saving

regulator.

Other Functions

Child lock

The child lock can be switched on and off for the respective room

proﬁ le.

Holiday function

Here you can enter the holiday times in advance. The energy saving

regulators set the temperature stipulated by you at these times.

Click on the „+“ symbol to add an additional holiday proﬁ le.

A maximum number of 8 holiday proﬁ les can be created.

7) Click on the calendar symbol (start) to stipulate the date of the

holiday start. To stipulate a precise time of departure click directly

into the display „00.00 am“ with the mouse and change this value as

you please. The end of the holiday can be also be set by clicking on

the calendar symbol (end). You delete the entire holiday proﬁ le by

clicking on the „x“ symbol.

Adding a holiday:

Holiday 1

Start 00:00 17-08-2014 7)

End 00:00 31-08-2014

Savings temperature

16.0

Printing of an overview page of the profiles

You can print out an overview of the room proﬁ les you create

by selecting „Print“ in the „File“ menu. Opening of stored room

proﬁ les. You can open your stored room proﬁ le and edit it as you

please by selecting „Open“ in the „File“ menu.

Child lock:

active/inactive display

Save:

Saving of the room proﬁ les

Block building:

Optional summary of the days

with the same heating times

(e.g. week/weekend)

Controller setting:

Setting of the comfort and

saving temperatures and

the offset temperature

Room profile range:

Graphical representation of the heating and saving times;

the individual weekdays are arranged one beneath the

other. Saving times are represented in bright green and

heating times are represented in dark green.

Menu line:

Storage of the time proﬁ le,

printing of the room overview

Status bar:

Stick connected - green

Stick inactive - grey

progmatic

3) 4) 4) 5)

www.eurotronic.org

Transfer to PROGmatic

Following the completion of the programming of your room

proﬁ les you save them onto the stick with the „Save“ button or

via the „Save“ selection in the „File“ menu. Following this you

can remove the stick from the USB port.

Transfer to the energy saving controller

Connect the plug for the EUROtronic Programming Port (see ﬁ gure)

to the corresponding port at the energy saving regulator:

CAUTION ! Progmatic must be disconnected from the computer during

the transfer of the heating profiles!

„P01“ appears on the display. This symbolises „Room proﬁ le 1“.

Depending on the appliance by turning the hand wheel or pressing

the buttons

and the room proﬁ le to be programmed can be

selected for the controller. Only that number of room proﬁ les will

be available for selection as are programmed in the software. The

room proﬁ le is transferred from the stick by subsequently pressing

the

PROG

button. After it has been successfully program-

med the standard display can once again be seen on the controller.

Please note that the display automatically returns to its basic state

if you do not perform any changes on the controller within approx.

10 seconds.

Notice upon the initial commissioning of the energy saving controller:

If you should perform the transfer to a brand new factory energy

saving controller please ensure that the energy saving controller

performs a commissioning procedure.

• Skip the entry of the date and time by pressing the

PROG

button

or the

button several times. The correct time is transferred

automatically to the energy saving controller by PROGmatic

following the adaption.

• The motor now travels to the

position to facilititate assem-

bly. The notice now appears in the display. Now proceed to the

assembly on the radiator as described in the operating instructors

of the controller.

• PROGmatic can now be connected to the energy saving controller.

Cleaning and used appliances

Cleaning

Only use a dry to slightly damp cloth to clean the PROGmatic.

Avoid the use of chemical solvents, you may possibly damage the

appliance by using them.

Used appliances

Do not throw used appliances and packaging into the household

waste. They can be recycled. You can also obtain additional infor-

mation concerning this from your local municipal administration.

Please note:

All the EUROtronic energy saving controllers with a programming

port can be programmed using PROGmatic. If you possess an ener-

gy saving controller with an older manufacturing date the following

functions can differ as described below: No negative value is

accepted for „Offset“. If a negative value is entered in the software

this will be ignored in the energy saving controller.

Technical data

Operating voltage: 5V DC , max. 100mA via USB port

Interfaces: to the PC to the energy saving controller

USB 2.0/EUROtronic programming port

System requirements: from Windows XP® SP3

Number of programmable heating periods: 4 heating periods per day

Function of the LEDs

LED flashes red: The Progmatic data has to be updated

LED flashes green: Stick is correctly connected to the computer

Protection type: IP30 according to EN 60529

Ambient temperature: 0 to +50

Storage temperature: -2 0 °C to +70 °C

Casing Material: Plastic ASA

Casing colour: similar to RAL 9016, white

Casing dimensions: approx. 75 x 14 x 34 mm (W x H x D)

Note on environmental protection

The adjacent symbol indicates laws dictate that electrical

and electronic apparatus no longer required must be

disposed of separate from domestic waste. Dispose of your

device at a collection point provided by your local public

waste authority. Packaging materials must be disposed of

according to local regulations.

Defective or empty batteries must be recycled in accordance with

Directive 2006/66/EC and its amendments. Return batteries and the

device via the collection points provided.

Declaration of Conformity

The declaration of conformit y can be found at:

https://www.eurotronic.org/produkte/progmatic-2014.html

Guarantee information

The guarantee period amounts to 24 months and commences on the

day of purchase. Please return the receipt as proof of purchase. Du-

ring the guarantee period defective PROGmatics can be sent with

sufﬁ cient postage to the ser vice address stated below. You will

then be sent a new or repaired device in return. A new guarantee

period does not commence upon the repair or replacement of the

device. Following the expiry of the guarantee period you also have

the option of sending the defective device with suf ﬁ cient postage

to the address stated below for its repair. Repairs that are required

following the expiry of the guarantee period are subject to a charge.

Your statutory rights shall not be restricted by this guarantee.

Eurotronic Technology GmbH

Südweg 1

36396 Steinau-Ulmbach

Telefon: 0 66 67 / 9 18 47- 0

Servicehotline: 0 66 67 / 9 18 47-19

E-Mail: support@eurotronic.org

Internet: www.eurotronic.org

www.eurotronic.org

Version: 20230908 Art.-No.: 700009

Produkt Specifikationer

Mærke:	Eurotronic
Kategori:	Termostat
Model:	PROGmatic

Har du brug for hjælp?

Hvis du har brug for hjælp til Eurotronic PROGmatic stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Termostat Eurotronic Manualer

Eurotronic Tür-/Fensterkontakt Z-Wave Plus Manual

9 November 2024

Eurotronic Genius LED100 Manual

9 November 2024

Eurotronic Spirit ZigBee Manual

9 November 2024

Eurotronic Comet DECT Manual

9 November 2024

Eurotronic Comet blue Manual

20 August 2024

Eurotronic Comet Z-Wave Manual

8 August 2024

Eurotronic Comet Zigbee Manual

8 August 2024

Eurotronic Spirit Z-Wave Plus Manual

7 August 2024

Eurotronic PROGmatic Manual

2 August 2024

Eurotronic GENIUS LCD100 Manual

1 August 2024

Termostat Manualer

Nyeste Termostat Manualer

Daikin BRC1D528 Manual

11 August 2025

Carrier Infinity SYSTXCCITC01-B Manual

10 August 2025

Hager WXF315 Manual

9 August 2025

Hama 176592 Manual

9 August 2025

Eberle UTE 1002 Manual

7 August 2025

Eberle UTE 1012 Manual

7 August 2025

Eberle SSR-E 6905 Manual

7 August 2025

JUNG CD 500 Manual

7 August 2025

Levoit Aura Sensor LTM-AS041S-WUS Manual

6 August 2025

Perel CTH407 Manual

5 August 2025