EverFocus Palun Manual

EverFocus Ikke kategoriseret Palun

Læs gratis den danske manual til EverFocus Palun (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 23 anmeldelser. Har du et spørgsmål om EverFocus Palun, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Introduction

Palun -is a PoE powered Video Balun which can transmit both power and digital IP video

signal over coaxial cable. With Palun, you can easily upgrade the surveillance system from

analog to IP, leveraging the existing coaxial infrastructure without re-cabling , . Moreover a

smart switch design enables to better accommodate camera of different class level Palun s s.

Please see all the detail information in this document.

PoE Switch IP CameraPalun

Palun

RJ45

Coax

RJ45

Power Provider

Power Consumer

How to Use the Switch on Palun?

The switch on Palun (the blue one only) is designed for adjusting the power output from

the P oE switch in order to better accommodate cameras of different class levels.

If the IP camera’s PoE type is Class 1~4, please switch it to C1+.

(If your IP camera s class level is 1, Palun will advertise it as Class 2’ to the PoE switch; if the

camera is Class 2, Palun will advertise it as Class 3 to the PoE switch, and so forth)

Class 1~4

C1+

If the IP camera’s PoE type is Class 0, please switch it to C0.

Class 0

C1+

Why to Use the Switch on Palun?

Originally, if your camera is Class 1 and consumes 4W, the PoE switch detects the class

level and sends which is sufficient to power up Class 1 guaranteed maximum 4W of power

the camera. However, Palun also consumes w2 atts of power, so the total power

consumption (6W) of both Palun and IP camera exceed ed by s the power (4W) deliver the

PoE switch.

PoE Switch

Palun (without switch)

IP Camera

4W / Port

Class 1

Now, if you switch Palun to C1+ (for Class 1~4 IP camera , only) it will help to increase the

guaranteed power output from the PoE a switch by dvertising a higher class level.

Therefore, in our example above, even though the IP camera lass 1, Palun will advertise is C

it as Class 2 to the PoE switch so that the PoE switch w ill reserve a Class 2 guaranteed

power (7W) for devices connected to this port. Then, it is now up both sufficient to power

camera and Palun.

PoE Switch

Palun (C1+)

IP Camera

7W / Port

Class

Class 2

Guaranteed Power at EverFocus PoE Switch

IEEE PoE Standard Class Guaranteed Power at PoE Switch

IEEE802.3af

IEEE802.3at (Type 1)

0 15.4W

1 4W

2 7W

3 15.4W

IEEE802.3at (Type 2) 4* 30W

Table 1

* Class 4 can only be used by IEEE802.3at (Type 2) devices.

Produkt Specifikationer

Mærke:	EverFocus
Kategori:	Ikke kategoriseret
Model:	Palun

Har du brug for hjælp?

Hvis du har brug for hjælp til EverFocus Palun stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret EverFocus Manualer

EverFocus Palun Manual

20 August 2024

EverFocus EHA-CRX Manual

20 August 2024

EverFocus EFC-02-1A Manual

19 August 2024

EverFocus EKB200 Manual

17 August 2024

EverFocus EKB500 Manual

17 August 2024

EverFocus EP4CQ Manual

17 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Dormakaba CenTran 4 Manual

19 Oktober 2025

ResMed AirFit N10 Manual

19 Oktober 2025

CRUX SWRCR-59LV Manual

19 Oktober 2025

Dormakaba Crane S1 Manual

19 Oktober 2025

Shape BP8000 Manual

19 Oktober 2025

Shape ALPKIT Manual

19 Oktober 2025

Shape COMPOFIC Manual

19 Oktober 2025

ResMed AirFit F10 Manual

18 Oktober 2025

Dormakaba Auditcon T52 Manual

18 Oktober 2025

Shape BP0008EVF Manual

18 Oktober 2025