Excalibur EX-21 Manual

Excalibur Ikke kategoriseret EX-21

Læs gratis den danske manual til Excalibur EX-21 (26 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Excalibur EX-21, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/26

SETUP & OPERATION MANUAL

SCROLL SAW

MODELS

#EX-16

#EX-21

#EX-30

(MODEL #EX-21 SHOWN)

FEATURES

New! Upper and lower blade guard

assembly helps prevent unintentional or

accidental hand/finger contact with the

saw blade

New! Switch protection device to prevent

accidental or unintentional start-up of the

saw.

New! Dust collector table kit for direct

dust-extraction hook-up.

Head tilts 30° (EX-16) / 38° (EX-21 & EX30)

left and 45° right, tilting the blade, not the

table keeping the workpiece level for bet-

ter control & more accurate cuts.

2" cutting thickness capacity.

Quick blade changes with finger

operated blade clamps, no tools

required.

Easy access speed and tension controls.

Onboard dust blower.

EX-16

16" throat capacity. Large 12” x 18 1/2”

(305 x 470 mm) table surface.

EX-21

21" throat capacity. Large 13 1/2” x 23 1/2”

(345 x 597 mm) table surface. Organized

blade storage on base.

EX-30

30" throat capacity. Large 14” x 32 1/2”

(358 x 825 mm) table surface. Organized

blade storage on base.

SPECIFICATIONS

LENGTH

27” (686 mm) - EX-16

32” (812 mm) - EX-21

43 1/4" (1100 mm) - EX-30

WIDTH

15” (380 mm) - EX-16 & EX-21

15 1/2” (394 mm) - EX-30

HEIGHT

17” (432 mm) - EX-16

15” (380 mm) - EX-21

15 1/4” (387 mm) - EX-30

BLADE TILT RANGE

30° (LEFT) TO 45° (RIGHT) - EX-16

38° (LEFT) TO 45° (RIGHT) - EX-21 & EX-30

THROAT

16”(406 mm) - EX-16

21”(535 mm) - EX-21

30”(762 mm) - EX-30

MAXIMUM CUTTING DEPTH

2” (51 mm)

SPEED (VARIABLE)

400 TO 1400 STROKES/MIN - EX-16

400 TO 1550 STROKES/MIN - EX-21 & EX-30

TABLE SURFACE

12” x 18 1/2” (305 x 470 mm) - EX-16

13 1/2” x 23 1/2” (345 x 597 mm) - EX-21

14” x 32 1/2” (358 x 825 mm) - EX-30

MOTOR

120 V, 1.3 A

WEIGHT

54 LBS (24.5 kg) - EX-16

65 LBS (29.5 kg) - EX-21

97 LBS (44 kg) - EX-30

VERSION 8_ REVISION 2 - MAY 05/13

(S/N: EX-16: 22018213 / EX-21: 22053213 / EX-30: 32231913)

THANK YOU for choosing this Excalibur by General®International Scroll Saw

model. This scroll saw has been carefully tested and inspected before shipment and if proper-

ly used and maintained, will provide you with years of reliable service. For your safety, as well

as to ensure optimum performance and trouble-free operation, and to get the most from your

investment, please take the time to read this manual before assembling, installing and opera-

ting the unit

The manual’s purpose is to familiarize you with the safe operation, basic function, and features

of this scroll saw as well as the set-up, maintenance and identification of its parts and compo-

nents. This manual is not intended as a substitute for formal woodworking instruction, nor to

offer the user instruction in the craft of woodworking. If you are not sure about the safety of per-

forming a certain operation or procedure, do not proceed until you can confirm, from know-

ledgeable and qualified sources, that it is safe to do so.

Once you’ve read through these instructions, keep this manual handy for future reference.

Disclaimer: The information and specifications in this

manual pertain to the unit as it was supplied from the

factory at the time of printing. Because we are commit-

ted to making constant improvements, General®Inter-

national reserves the right to make changes to compo-

nents, parts or features of this unit as deemed necessary,

without prior notice and without obligation to install any

such changes on previously delivered units. Reasonable

care is taken at the factory to ensure that the specifica-

tions and information in this manual corresponds with

that of the unit with which it was supplied. However, spe-

cial orders and “after factory” modifications may render

some or all information in this manual inapplicable to

your machine. Further, as several generations of this

model of sroll saw and several versions of this manual

may be in circulation, if you own an earlier or later ver-

sion of this unit, this manual may not depict your unit

exactly. If you have any doubts or questions contact

your retailer or our support line with the model and seri-

al number of your unit for clarification.

GENERAL® INTERNATIONAL

8360 Champ-d’Eau, Montreal (Quebec) Canada H1P 1Y3

Telephone (514) 326-1161 • Fax (514) 326-5555 • www.general.ca

Produkt Specifikationer

Mærke:	Excalibur
Kategori:	Ikke kategoriseret
Model:	EX-21

Har du brug for hjælp?

Hvis du har brug for hjælp til Excalibur EX-21 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Excalibur Manualer

Excalibur EX-21 Manual

20 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Advantech PCLD-8813 Manual

29 Juli 2025

Hamilton Buhl HygenX Vray Manual

29 Juli 2025

Pearl Sports CLH-930 Manual

29 Juli 2025

Advantech ITA-7220 Manual

29 Juli 2025

Zoom 505 Manual

29 Juli 2025

Advantech EPC-T3217 Manual

29 Juli 2025

Fun Generation LED Diamond Dome MK II Manual

29 Juli 2025

Advantech SOM-DB3520 Manual

29 Juli 2025

Panduit R2P Manual

29 Juli 2025

Advantech UTC-318F Manual

29 Juli 2025