Extech 380926 Manual

Extech Måling 380926

Læs gratis den danske manual til Extech 380926 (10 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 19 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 10 anmeldelser. Har du et spørgsmål om Extech 380926, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/10

User's Manual

2000A Auto Ranging

True RMS Clamp + DMM

MODEL 380926

380926 -EN-V7.1-3/12

INTRODUCTION

Congratulations on your purchase of Extech’s 380926 Clamp meter + Digital MultiMeter. This meter

can measure to 2000A through the clamp and also measure to 400mA through the test leads. With

Capacitance, Diode and Duty Cycle measurements, this meter provides the user with a full featured

multimeter combined with the high amperage current clamp. This meter is shipped fully tested and

calibrated and, with proper use, will provide years of reliable service.

SAFETY

Safety Symbols

This symbol, adjacent to another symbol or terminal, indicates the user must refer to

the manual for further information.

This symbol, adjacent to a terminal, indicates that, under normal use, hazardous

voltages may be present

Double insulation

WARNING: This indicates that a potentially hazardous condition which, if not avoided, could result

in death or serious injury.

CAUTION: This indicates that a potentially hazardous condition which, if not avoided, could result

in injury or damage to the meter Reply to request.

Safety Precautions

1. WARNING: Improper use of this meter can cause damage, shock, injury or death. Read and

understand this user’s manual before operating the meter.

2. Make sure any covers or battery doors are properly closed and secured.

3. Always remove the test leads before replacing the battery or fuses.

4. Inspect the condition of the test leads and the meter itself for any damage before operating the

meter. Repair or replace any damage before use.

5. Do not exceed the maximum rated input limits.

6. Use great care when making measurements if the voltages are greater than 25VAC rms or

35VDC. These voltages are considered a shock hazard.

7. Always discharge capacitors and remove power from the device under test before performing

Capacitance, Diode, Resistance or Continuity tests.

8. Remove the battery from the meter if the meter is to be stored for long periods.

Produkt Specifikationer

Mærke:	Extech
Kategori:	Måling
Model:	380926

Har du brug for hjælp?

Hvis du har brug for hjælp til Extech 380926 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måling Extech Manualer

7 Juni 2025

6 Juni 2025

17 Marts 2025

22 Oktober 2024

22 Oktober 2024

6 April 2024

4 April 2024

23 Marts 2024

4 Marts 2024

18 Februar 2024

Måling Manualer

Nyeste Måling Manualer

Ermenrich SC20 Manual

15 Juni 2025

Ermenrich Zing WT30 Manual

15 Juni 2025

Ermenrich Zing WT60 Manual

15 Juni 2025

Ermenrich Verk LL100 Manual

15 Juni 2025

Ermenrich Zing TC07 Manual

14 Juni 2025

Ermenrich Ping MK30 Manual

14 Juni 2025

Ermenrich Seek VE50 Manual

14 Juni 2025

Ermenrich Seek FR40 Manual

14 Juni 2025

Ermenrich Reel PRO GE60 Manual

14 Juni 2025

Mitsubishi SRK35MMH1 Manual

14 Juni 2025