Extech 380941 Manual

Extech Måling 380941

Læs gratis den danske manual til Extech 380941 (6 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om Extech 380941, eller vil du spørge andre brugere om produktet?

Side 1/6
User Guide
AC/DC Mini Clamp Meter
Model 380941
380941-EN-V3.2-3/12
2
Introduction
Congratulations on your purchase of Extech’s DC/AC Clamp Meter. This professional meter, with
proper care, will provide years of safe reliable service.
Front Panel Description
1. Current sense jaw
2. Measurement Trigger
3. Function switch
4. Data Hold key
5. Max Min key
6. One-touch DCA zero key
7. LCD Display
8. 40 segment bargraph display
9. Positive input terminal for V, HZ and Ω
10. COM terminal
International Symbols
!
!
!
!! Caution ! Refer to the explanation in this Manual
Caution ! Risk of electric shock
Earth (Ground)
Safety
This meter has been designed to be safe in use, but the operator must use caution in its operation.
The rules listed below should be carefully followed for safe operation.
1. NEVER apply voltage or current to the meter that exceeds the specified maximum:
2. USE EXTREME CAUTION when working with high voltages.
3. DO NOT measure voltage if the voltage on the "COM" input jack exceeds 500V above earth
ground.
4. NEVER connect the meter leads across a voltage source while the function switch is in the
current, resistance or diode mode; doing so can damage the meter.
5. ALWAYS discharge filter capacitors in power supplies and disconnect the power when making
resistance or diode tests.
6. ALWAYS turn off the power and disconnect the test leads before opening the back to replace
the fuse or batteries.
7. NEVER operate the meter unless the back cover and the battery/fuse door are in place and
fastened securely.


Produkt Specifikationer

Mærke: Extech
Kategori: Måling
Model: 380941

Har du brug for hjælp?

Hvis du har brug for hjælp til Extech 380941 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Måling Extech Manualer

Extech

Extech 475055 Manual

7 Juni 2025
Extech

Extech 475044 Manual

6 Juni 2025
Extech

Extech 44550 Manual

17 Marts 2025
Extech

Extech 380926 Manual

22 Oktober 2024
Extech

Extech 380941 Manual

22 Oktober 2024
Extech

Extech 407113 Manual

6 April 2024
Extech

Extech AUT20 Manual

4 April 2024
Extech

Extech EN100 Manual

23 Marts 2024
Extech

Extech CO10 Manual

4 Marts 2024
Extech

Extech 380193 Manual

18 Februar 2024

Måling Manualer

Nyeste Måling Manualer