Extech EX623 Manual

Extech Multimeter EX623

Læs gratis den danske manual til Extech EX623 (15 sider) i kategorien Multimeter. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Extech EX623, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

User's Guide

400Amp True RMS AC/DC Clamp

Meter with IR Thermometer

Model EX623

EX623-EU V2.3 04/10 2

Introduction

Congratulations on your purchase of this Extech EX623 True RMS Clamp Meter. This meter

measures AC Current, DC Current, AC/DC Voltage, Resistance, Capacitance, Frequency,

Diode Test, Duty Cycle and Continuity. Special features include Dual Input Thermocouple

Temperature, Non-Contact IR Temperature and Non-Contact Voltage detector. The double

molded case is designed for heavy duty use. This meter is shipped fully tested and calibrated

and, with proper use, will provide years of reliable service.

Safety

International Safety Symbols

This symbol, adjacent to another symbol or terminal, indicates the user

must refer to the manual for further information.

This symbol, adjacent to a terminal, indicates that, under normal use,

hazardous voltages may be present

Double insulation

This WARNING symbol indicates a potentially hazardous situation, which

if not avoided, could result in death or serious injury.

This CAUTION symbol indicates a potentially hazardous situation, which

if not avoided, may result damage to the product.

PER IEC1010 OVERVOLTAGE INSTALLATION CATEGORY

OVERVOLTAGE CATEGORY I

Equipment of OVERVOLTAGE CATEGORY I is equipment for connection to circuits in

which measures are taken to limit the transient overvoltages to an appropriate low level.

Note – Examples include protected electronic circuits.

OVERVOLTAGE CATEGORY II

Equipment of OVERVOLTAGE CATEGORY II is energy-consuming equipment to be

supplied from the fixed installation.

Note – Examples include household, office, and laboratory appliances.

OVERVOLTAGE CATEGORY III

Equipment of OVERVOLTAGE CATEGORY III is equipment in fixed installations.

Note – Examples include switches in the fixed installation and some equipment for industrial

use with permanent connection to the fixed installation.

OVERVOLTAGE CATEGORY IV

Equipment of OVERVOLTAGE CATEGORY IV is for use at the origin of the installation.

Note – Examples include electricity meters and primary over-current protection equipment

WARNING

CAUTION

Produkt Specifikationer

Mærke:	Extech
Kategori:	Multimeter
Model:	EX623

Har du brug for hjælp?

Hvis du har brug for hjælp til Extech EX623 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Multimeter Extech Manualer

22 December 2024

28 August 2024

27 August 2024

27 August 2024

27 August 2024

23 August 2024

17 August 2024

14 August 2024

13 August 2024

12 August 2024

Multimeter Manualer

Nyeste Multimeter Manualer

8 Juni 2025

7 Juni 2025

7 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

6 Juni 2025

3 Juni 2025