Extech SDL400 Manual

Extech Lysmåler SDL400

Læs gratis den danske manual til Extech SDL400 (5 sider) i kategorien Lysmåler. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Extech SDL400, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

USER GUIDE

Light Meter

SD Card real-time datalogger

Model SDL400

5 SDL400-EU-EN V1.2 9/12

Setup Mode

Basic settings at a glance

To view the current conguration of the meter with regard to time, date, and datalogging sampling

rate press the SET button momentarily. The meter will now display the conguration in quick

succession. If the information is missed on the rst try, simply press the SET button again until all of

the information is noted.

Accessing the Setup mode

1. Press and hold the SET button for at least 1.5 seconds to access the Setup menu.

2. Press the SET button momentarily to step through the available parameters. The parameter

type is shown on the bottom of the LCD and the current selection for that type is shown above

it.

3. When a parameter is displayed that is to be changed, use the arrow keys to change the

setting. Press the ENTER button to conrm a change.

4. Press and hold the SET button for at least 1.5 seconds to exit the Setup mode. Note that the

meter automatically switches out of the Setup mode if no key is pressed within 7 seconds.

The available Setup parameters are listed below. Additional detailed information is provided

below this list:

dAtE

Set the clock (Year/Month/Date; Hours/Minutes/Seconds)

SP-t

Set the datalogger sampling rate (Hours/Minutes/Seconds)

PoFF

Automatic power-off management (Enable or disable the auto-power o function)

bEEP

Set the beeper sound ON/OFF

dEC

Set the numerical format; USA (decimal: 20.00) or European (comma: 20,00)

Sd F

Format the SD memory card

t-CF

Units of measure selection for temperature readings (C or F)

tYPE

Select the Thermocouple type (K or J)

Setting the Clock Time

1. Access the dAtE parameter as described in the Accessing Setup Mode section above.

2. Use the arrow keys to change a value.

3. Use the ENTER button to step through the selections.

4. Press and hold the SET button for at least 1.5 seconds to exit to the normal operation mode (or

simply wait 7 seconds for the meter to automatically switch to the normal operating mode).

5. The clock will keep accurate time even when the meter is switched o. However, if the battery

expires the clock will have to be reset after fresh batteries are installed.

Setting the Datalogger Sampling Time (Rate)

1. Access the SP-t parameter as described in the Accessing Setup Mode section above.

2. The sampling rate can be set to ‘0’ seconds (for manual logging) or

1, 2, 5, 10, 30, 60, 120,

300, 600, 1800, 3600 seconds for auto logging.

Use the arrow keys to select the sampling rate.

Press the ENTER button to confirm the entry.

4. Press and hold the SET button for at least 1.5 seconds to exit to the normal operation mode (or

simply wait 7 seconds for the meter to automatically switch to the normal operating mode).

Produkt Specifikationer

Mærke:	Extech
Kategori:	Lysmåler
Model:	SDL400

Har du brug for hjælp?

Hvis du har brug for hjælp til Extech SDL400 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lysmåler Extech Manualer

23 Juli 2024

20 Juli 2024

15 Februar 2024

18 Juni 2023

5 Marts 2023

25 Februar 2023

Lysmåler Manualer

Nyeste Lysmåler Manualer

Velleman DVM8050 Manual

12 Januar 2025

Beha-Amprobe LM-120 Manual

31 December 2025

Sekonic FLash Master L-358 Manual

31 December 2025

Sekonic DualMaster L-558 Manual

31 December 2025

PCE Instruments PCE-LMD 5 Manual

16 Oktober 2024

Sekonic SpectroMaster L-858D Manual

2 Oktober 2024

Gossen Sixtomat F2 Manual

2 Oktober 2024

Sekonic L-558 Manual

2 Oktober 2024

Sekonic LiteMaster Pro L-478DR Manual

6 September 2024

Voltcraft LX-80 Manual

1 September 2024