Extralife Instruments Super Sixteen Manual

Extralife Instruments Ikke kategoriseret Super Sixteen

Læs gratis den danske manual til Extralife Instruments Super Sixteen (15 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 27 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 14 anmeldelser. Har du et spørgsmål om Extralife Instruments Super Sixteen, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/15

extralife instruments

Owner’s manual v1.1

Documents available at:

http://extralifeinstruments.com/

PITCH Adjusts

pitch output for

selected step.

Range +/- 12

semitones

DATA this stepped

encoder adjusts the

selected sequence

parameter, like patch

number or tempo.

CLOCK input accepts

a 1-pulse-per-step clock

signal and advances the

sequencer in sync to

external gear.

RESET input

accepts a pulse to

restart the sequence

at the beginning, for

synchronized looping.

CV output sends

out an unquantized

control voltage

controlled by the CV

parameter for each

step (0-8v)

PITCH output sends

quantized control

voltage set by the

PITCH and OCTAVE

parameters for each

step (0-8v)

GATE output sends

5V gate signals for

each active step, the

duration of which is

set by each step’s

LENGTH parameter

STEP BUTTONS

select and toggle steps

on and o󰀨. Press once

to select and again to

toggle. Inactive steps are

activated automatically

when selected.

RECORD enables

motion recording. Press

and hold while adjusting

PITCH, OCTAVE,

LENGTH, or CV to

record changes to the

currently playing steps in

realtime.

MUTATE activates

the selected “mutation”

e󰀨ect. Adjust DATA while

holding MUTATE to

change the e󰀨ect depth.

OCTAVE Adjusts

pitch output for

selected step in

increments of 12

steps. Range +/- 4.

LENGTH Adjusts

the duration of the

selected step, as

a percentage of a

single step’s length.

Range 0-400%.

CV Adjusts the

value of the

secondary CV

output for the

selected step.

Range 0-100%

GLIDE Activates

portamento, or

a “slide” to the

selected note over

its duration.

SUPER SIXTEEN

SHIFT Press [SHIFT] plus another

button simultaneously to access its

secondary or “shift” function (these

are outlined in black labels on the

panel). Buttons that have shift

functions include Steps 9-16, Record,

Mutate, Glide, and Play. When

you are editing a parameter, press

[SHIFT] again to exit back to the

main note data display.

PLAY Start or stop the internal

sequencer playback. [SHIFT]+Play

resets to the start, the same as a

pulse to the RESET input. A pulse to

the CLOCK input will stop the internal

sequencer.

Note: Pressing play while the

CLOCK input is receiving a signal

generally has no e󰀨ect - if the internal

tempo is set much faster than the

external clock, however, pressing

play may cause the sequencer to

gain a step relative to the external

clock before it syncs again.

LOAD/SAVE enables you to save the active

sequence or load a new one. To save a

sequence to memory, press once, and SAVE

then use the knob to choose the PATCH DATA

NUMBER (1-99) [0-99] where this sequence

will be saved. To conrm it, press SAVE

again. Press [SHIFT] to cancel saving. Once

saved, the sequence can be recalled at any

time. It’s a good idea to save your sequences

frequently, since it’s easy to radically alter the

patch memory.

Note: While selecting a patch number, the

decimal point after the number indicates

that there is already a sequence saved at that

patch number.

Once you’ve chosen a PATCH NUMBER

to save your sequence, you can double-tap

SAVE to overwrite it with the active sequence.

Get in the habit of doing this whenever you

make a change you like! You can likewise

double-tap to reload the last-saved LOAD

sequence if you make a change you dislike.

To load a sequence, press once, and LOAD

then use the knob to choose a PATCH DATA

NUMBER to load. Press again to LOAD

conrm and load the sequence

Note:If there is no sequence in that patch

number, a blank sequence will be loaded.

When a new sequence is loaded, the

sequence will “pick up” playback in real-time at

the same place in the last bar of the sequence,

making synchronized songs and pickup

phrasing dead simple.

1. Sequence controls

Produkt Specifikationer

Mærke:	Extralife Instruments
Kategori:	Ikke kategoriseret
Model:	Super Sixteen

Har du brug for hjælp?

Hvis du har brug for hjælp til Extralife Instruments Super Sixteen stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Extralife Instruments Manualer

Extralife Instruments Super Sixteen Manual

19 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Vulcan 1024W Manual

15 Juni 2025

Backyard Pro 554PL2030 Manual

15 Juni 2025

Haier 1U18TE2HDA Manual

15 Juni 2025

AEG EWKEXT1 Manual

15 Juni 2025

Planet XGPN-400AXV Manual

15 Juni 2025

Cadac 3 Cook Turbo Manual

15 Juni 2025

Bobrick B-3944 Manual

15 Juni 2025

Sony SZC-4008 Manual

15 Juni 2025

Watts ETX-15 Manual

15 Juni 2025

Sigma REMOTE ONE Manual

15 Juni 2025