FaseLunare VEGA Manual

FaseLunare Ikke kategoriseret VEGA

Læs gratis den danske manual til FaseLunare VEGA (12 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 11 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 6 anmeldelser. Har du et spørgsmål om FaseLunare VEGA, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/12
FASELUNARE VEGA MANUAL 1.0
Hello!
Thank you for choosing VEGA!
When we started thinking about our first module, we thought about what we wanted to put in our rack. We wanted a rhythmic section that
would allow us to have multiple sounds simultaneously.
Another thing we wanted was to save space because the number one enemy of modular systems is the space.
So we started thinking about VEGA. It had to be small and have multiple functions.
In the end, we came to have a module of only 6HP with 4 voices dedicated to percussive sounds with the possibility of having synthesis
and samples as a sound source.
Each voice therefore has 4 samples (stored on SD card) and 1 synth engine dedicated to specific types of sound (Kick, Snare, Hats x 2)
The interface is very simple, 4 voice buttons (amber), 1 function button (amber), 2 RGB encoders and a series of colored LEDs for the
pages.
FOR QUESTIONS ABOUT VEGA, PLEASE WRITE TO SUPPORT@FASLEUNARE.COM
USER INTERFACE
A - SD CARD - Used to store samples and preset.
Each voice uses and they must4 samples in wave format 44100 Mono
be named: A1.wav, A2.wav, A3.wav, A4.wav for the first voice (K), B1.wav,
B2.wav, B3.wav, B4.wav for the second voice (L), C1.wav, C2.wav, C3.wav,
C4.wav for the third voice (M) and D1.wav, D2.wav, D3.wav, D4.wav for the
last voice (N).
B - PAGES - A key point of the vega UI is pagination, the 4 leds (B)
indicate the different pages. Each page hosts 2 parameters.
C - FUNCTION - The function button used alone allows you to change the
parameters page. When used in tandem with one of the voice buttons, this
activates the mode.MUTE
D - METER - The 5 LEDs indicate the value of the parameters and, on the
first page, indicate the sound source (samples or synthesis).
E - F - ENCODERS - The 2 encoders are , which means that differentRGB
colors correspond to different functions. corresponds to theGREEN
PARAMETERS BLUE SOURCE RED, corresponds to the selection and
indicates the selection and storage of the .PRESETS
G H I J VOICE- - - - selection buttons. Select the voice to edit by pressing
the corresponding button. When a voice is selected, it is brighter. Pressing
the C button MUTEtogether with one of the voice buttons enters the
mode. Pressing again exits the MUTE mode. While in MUTEC + VOICE
MODE, the button flash with a FADE IN and FADE OUT effects.

Produkt Specifikationer

Mærke: FaseLunare
Kategori: Ikke kategoriseret
Model: VEGA

Har du brug for hjælp?

Hvis du har brug for hjælp til FaseLunare VEGA stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret FaseLunare Manualer

FaseLunare

FaseLunare VEGA Manual

29 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Playtive

Playtive IAN 304090 Manual

16 Juni 2025
Toorx

Toorx SRX-85 Manual

16 Juni 2025
Cable Matters

Cable Matters 180070 Manual

16 Juni 2025
Philips

Philips Avent SCD252 Manual

16 Juni 2025
Philips

Philips Q-Line 55BDL2050Q Manual

16 Juni 2025
EFX

EFX Delta DUDB4 Manual

16 Juni 2025
Foster

Foster Prep Station PS1000HR Manual

16 Juni 2025
OmniMount

OmniMount OBT60 Manual

16 Juni 2025
XO

XO D34HPBF Manual

16 Juni 2025
Janitza

Janitza 800-DI14 Manual

16 Juni 2025