FWS-150/3K 47
STATEMENT OF CONFORMITY
VERSION 0404-09.1
Ferm BV
P.O. Box 30159
8003 CD Zwolle
Nederland
www.ferm.com
FWS-150/3K
2
XXXX
Congratulations!
With the purchase of this high quality Ferm tool, you
have made an excellent choice. Ferm products are
rugged, safe and easy to use.
It is very important to exercise care when handling
and servicing this tool. Please read these
instructions thoroughly, and be sure to follow the
directions given. You will then enjoy many years of
service from your Ferm tool.
Safety Instructions
In these instructions for use, the following symbols
are used:
Caution: risk of bodily harm, fatality or
damage to the machine, from failure to
follow the directions in these instructions
for use.
Caution: electrical current.
The machine is double insulated compliant
with EN50144; therefore no earth
connection is required.
Visual check before starting to work
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Product information
Package contents
• Electric wall chaser
• Handgrip
• Diamond cutting discs (2 x)
• Cam wrench
• Hex key
• Cold chisel
• Dust extraction adapter
• Set carbon brushes
• Instructions for use
• Guarantee card
Specifications
Voltage 230 V~
Frequency 50 Hz
Power rating 1450 W
Rotational speed (not loaded) 8500/min
Max. cutting depth 8-40 mm
Max. channel width 8-30 mm
Weight 4,5 kg
Cutting disc (2x) Ø150 x 22,2 x 2,0
Lpa (Sound pressure level) 90,9 dB(A)
Lwa (Sound power level) 103,9 dB(A)
Vibration level 0,9 m/s2
GENERAL
1. On/off trigger switch
2. Attachment point for
handgrip
3. Connection for
mechanical dust
extraction
4. Guide wheel
5. Distance washers
6. Spindle nut
7. Cutting depth fixing
knob
8. Cutting direction
9. Shaft lock
