Finder 15.51.8.230.0400 Manual

Finder bryter 15.51.8.230.0400

Læs gratis den danske manual til Finder 15.51.8.230.0400 (6 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Finder 15.51.8.230.0400, eller vil du spørge andre brugere om produktet?

Side 1/6
Box or panel mount
Maximum lamp load 400 W
Two operating modes
Two different types for linear
and step dimming
Trailing edge dimming
method
For mounting within
residential switch boxes
Maximum lamp load 100 W
Two operating modes
Leading edge dimming
method
Compatible with LED
dimmable lamps
17.5 mm modular
Maximum lamp load 500 W
Multi-function
Leading and trailing edge
dimming methods (depending
on the function)
Compatible with energy
saving dimmable lamps
1
Features
Electronic step relay and dimmer for control of
lighting levels
Suitable for incandescent and halogen lighting
loads (with or without transformer or electronic
supply)
Version compatible with energy saving (CFL or
LED) dimmable lamps and with all types of
electromagnetic transformers, even in no-load
condition (15.81)
Version compatible with 230 V LED dimmable
lamps (15.91)
Use with 3 or 4 wire connection
“Soft” On and Off transitions
Two selectable operating modes:
with or without previous light level memory
Step (15.51 only) or linear dimming
Thermal protection against overload
Thermo-fuse for extreme protection (15.81)
230 V AC supply, 50 Hz (15.91), 50 or 60 Hz
(15.51), 50/60 Hz with automatic recognition
of frequency (15.81)
15.91 15.51 15.81
230 230 230
100 400 500
3 10 3
100 400 500 (1)
300 (2) 500 (3)
500 (3)
400 (4) 500 (1)
100 (5)
50 100 (5)
50 (6) 100 (1)
230 (7) 230 (8) 230
(0.8…1.1)UN(0.8…1.1)UN(0.8…1.1)UN
0.4 0.7 0.5
Leading edge Trailing edge Trailing edge (pos. )
Leading edge (pos. )
and ( )
–10…+50 (9) –10…+50 (9) –10…+50 (10)
IP 20 IP 20 IP 20
Output data
Rated voltage V AC
Power max. W
Power min. W
Nominal lamp rating: 230 V incandescent or halogen W
toroidal electromagnetic transformers for LV halogen W
E-core electromagnetic transformers for LV halogen W
electronic transformers (ballasts) for LV halogen W
dimmable compact fluorescent (CFL) W
dimmable 230 V LED W
dimmable electronic transformers for LV LED W
Supply specifications
Nominal voltage (UN) V AC (50/60 Hz)
Operating range
Stand-by power consumption W
Dimming operating mode
Technical data
Ambient temperature range °C
Protection category
Approvals (according to type)
Note
(1) Select “incandescent lamp” ( ) position on the front selector.
(2) One transformer only. Power-up only with the lamp load connected.
(3) Select “transformer” ( ) position on the front selector. Preferably, no more than 2 transformers.
(4) One transformer only.
(5) Select “CFL” ( ) position on the front selector, and set the appropriate minimum dimming value (dependent on lamp type).
(6) Only if electronic transformers are compatible with leading edge method.
(7) Only 50 Hz version available.
(8) Specific 60 Hz version available (see ordering information).
(9) It is not recommended to mount more than one dimmer in the same wall box, unless an adequate ventilation is provided or the lamp load is
less than 100 W (15.51) or 50 W (15.91).
(10) With lamp load > 300 W, adequate ventilation must be provided - a gap of 5 mm on both side of the dimmer is suggested.
Not compatible with illuminated push-buttons.
15 Series - Electronic step relay and dimmer
Screw terminal
For outline drawing see page 6
II-2013, www.findernet.com
SERIE
15
2
15 Series - Electronic step relay and dimmer
Ordering information
Example: type 15.51, electronic step relay and dimmer, 230 V AC.
Series
Type
5 = Panel or box mount
8 = 35 mm rail (EN 60715)mount, 17.5 mm wide,
for energy saving lamps
9 = Switch box mount, for LED lamps
No. of poles
1 = 1 output
Supply voltage
230 = 230 V
Supply version
8 = AC
5 1 0 48 0 0
. . . .
2 3 01 5
0 = Standard
4 = Only for 15.51 linear
dimming
AC input frequency
0 = 50 Hz (15.51/15.91)
50/60 Hz (15.81)
6 = 60 Hz (15.51)
Output power
0 = 100 W (15.91)
4 = 400 W (15.51)
5 = 500 W (15.81)
Technical data
Codes
15.51.8.230.0400 step dimming, 50Hz
15.51.8.230.0404 linear dimming, 50Hz
15.51.8.230.0460 step dimming, 60Hz
15.81.8.230.0500 linear dimming, 50/60Hz
15.91.8.230.0000 linear dimming, 50Hz
II-2013, www.findernet.com
EMC specifications
Type of test Reference standard 15.51/15.91 15.81
Electrostatic discharge contact discharge EN 61000-4-2 4 kV
air discharge EN 61000-4-2 8 kV
Radiated electromagnetic field (80 … 1,000 MHz) EN 61000-4-3 3 V/m 10 V/m
Fast transients (burst) on supply terminals EN 61000-4-4 4 kV 4 kV
(5-50 ns, 5 and 100 kHz) on pushbutton connection EN 61000-4-4 4 kV 4 kV
Voltage pulses on supply terminals
(surge 1.2/50µs) differential mode EN 61000-4-5 2 kV 2 kV
Radiofrequency common mode voltage on supply terminals EN 61000-4-6 3 V 3 V
(0.15…80 MHz) on pushbutton connection EN 61000-4-6 3 V 3 V
Voltage dips 70 % UN,40 % UNEN 61000-4-11 10 cycles
Short interruptions EN 61000-4-11 10 cycles
Radiofrequency conducted emissions 0.15…30 MHz EN 55014 class B
Radiated emissions 30…1,000 MHz EN 55014 class B
Terminals solid cable stranded cable
Max. wire size mm21 x 6 / 2 x 4 1 x 4 / 2 x 2.5
AWG 1 x 10 / 2 x 12 1 x 12 / 2 x 14
Screw torque Nm 0.8
Wire strip length mm 9
Other data 15.91 15.51 15.81
Power lost to the environment without load W 0.4 0.7 0.5
with rated load W 1.2 2.2 2.6
Max cable length for push-button connection m 100 100 100
SERIE
15


Produkt Specifikationer

Mærke: Finder
Kategori: bryter
Model: 15.51.8.230.0400

Har du brug for hjælp?

Hvis du har brug for hjælp til Finder 15.51.8.230.0400 stil et spørgsmål nedenfor, og andre brugere vil svare dig