Fluke 9102S Manual

Fluke Temperaturregulator 9102S

Læs gratis den danske manual til Fluke 9102S (34 sider) i kategorien Temperaturregulator. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Fluke 9102S, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/34

9102S

Dry-Well Calibrator

User’s Guide

2005 Rev. 1, 4/20

All product names are trademarks of their respective companies.

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Each Fluke product is warranted to be free from defects in material and workmanship under normal use and

service. The warranty period is one year and begins on the date of shipment. Parts, product repairs, and services

are warranted for 90 days. This warranty extends only to the original buyer or end-user customer of a Fluke

authorized reseller, and does not apply to fuses, disposable batteries, or to any product which, in Fluke's opinion,

has been misused, altered, neglected, contaminated, or damaged by accident or abnormal conditions of operation

or handling. Fluke warrants that software will operate substantially in accordance with its functional specifications

for 90 days and that it has been properly recorded on non-defective media. Fluke does not warrant that software

will be error free or operate without interruption.

Fluke authorized resellers shall extend this warranty on new and unused products to end-user customers only but

have no authority to extend a greater or different warranty on behalf of Fluke. Warranty support is available only if

product is purchased through a Fluke authorized sales outlet or Buyer has paid the applicable international price.

Fluke reserves the right to invoice Buyer for importation costs of repair/replacement parts when product purchased

in one country is submitted for repair in another country.

Fluke's warranty obligation is limited, at Fluke's option, to refund of the purchase price, free of charge repair, or

replacement of a defective product which is returned to a Fluke authorized service center within the warranty

period.

To obtain warranty service, contact your nearest Fluke authorized service center to obtain return authorization

information, then send the product to that service center, with a description of the difficulty, postage and insurance

prepaid (FOB Destination). Fluke assumes no risk for damage in transit. Following warranty repair, the product will

be returned to Buyer, transportation prepaid (FOB Destination). If Fluke determines that failure was caused by

neglect, misuse, contamination, alteration, accident, or abnormal condition of operation or handling, including

overvoltage failures caused by use outside the product’s specified rating, or normal wear and tear of mechanical

components, Fluke will provide an estimate of repair costs and obtain authorization before commencing the work.

Following repair, the product will be returned to the Buyer transportation prepaid and the Buyer will be billed for the

repair and return transportation charges (FOB Shipping Point).

THIS WARRANTY IS BUYER'S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER

WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. FLUKE SHALL NOT BE LIABLE FOR ANY

SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OR LOSSES, INCLUDING LOSS OF

DATA, ARISING FROM ANY CAUSE OR THEORY.

Since some countries or states do not allow limitation of the term of an implied warranty, or exclusion or limitation

of incidental or consequential damages, the limitations and exclusions of this warranty may not apply to every

buyer. If any provision of this Warranty is held invalid or unenforceable by a court or other decision-maker of

competent jurisdiction, such holding will not affect the validity or enforceability of any other provision.

11/99

Fluke Corporation

P.O. Box 9090

Everett, WA 98206-9090

U.S.A.

Fluke Europe B.V.

P.O. Box 1186

5602 BD Eindhoven

The Netherlands

Produkt Specifikationer

Mærke:	Fluke
Kategori:	Temperaturregulator
Model:	9102S

Har du brug for hjælp?

Hvis du har brug for hjælp til Fluke 9102S stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Temperaturregulator Fluke Manualer

2 September 2025

3 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

2 August 2025

Temperaturregulator Manualer

Nyeste Temperaturregulator Manualer

Gossen Metrawatt R6000 Manual

26 September 2025

Emko ESM-9420 Manual

7 September 2025

SRS PTC10 Manual

3 September 2025

Festo SOEG-S-M18-S-L Manual

18 August 2025

Mueller GS 70.00 knx Manual

18 August 2025

Daikin KRCS01-8B Manual

11 August 2025

Daikin BRC4C61 Manual

11 August 2025

IFM LT8922 Manual

9 August 2025

IFM TA1605 Manual

9 August 2025

Hager EK724 Manual

9 August 2025