Franke HHF23T Manual


Læs gratis den danske manual til Franke HHF23T (6 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Franke HHF23T, eller vil du spørge andre brugere om produktet?

Side 1/6
Franke Kindred Canada Limited
|
1000 Franke Kindred Road
|
Midland
|
Ontario
|
Canada
|
L4R 4K9
CANADA: T 1-855-446-5663
|
|
commercial-info.ca@franke.com
USA: T 1-855-526-0503 | F 1-866-440-2250 | commercial-info.us@franke.com
HHF23TZMI | 05/20
Hands Free Faucet HHF23T
Installation and Operating Instructions
1. Safety First
These instructions relate to the use of the Franke Hands Free
Faucets only, any external or ‘add-on’ parts will be supplied with
separate instructions.
Appropriate personal protective equipment must be worn when
installing, calibrating and commissioning this product.
It is recommended that the electrical part of the installation be
carried out by a qualified electrician in accordance with the latest
electrical regulations. It is also recommended that any plumbing is
carried out by a qualified plumber.
This is an electronic device which must be installed correctly to
perform correctly.
If the faucet is used by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and
knowledge, they must be given adequate supervision or instruction
concerning use of the faucet by a person responsible for their
safety. Children should be supervised to ensure that they do not
play with the faucet.
IMPORTANT: Please read these instructions
carefully and follow each stage in order!
2. Parts List
1. Aerator
2. Sensor
3. Faucet body
4. Rubber washer
5. Brass washer
6.1 Cold water inlet
6.2. Hot water inlet
7. Battery box clip
8. Battery box (4 x AA)
9. Mounting plate
10. Installation nut
11. Power cable
12. Transformer
2
HHF23TZMI | 05/20
3. Installation Guide
Setting Sensor Range
Once faucet is installed, disconnect the sensor from the power (Fig. 6, A-B for 30 seconds). Reconnect it until
the sensor light is flashing. Place a hand in front of the sensor at a distance where you want the water flow to
trigger.
Hold hand in place until the light stops flashing. You have now set the sensor.
If you find the sensor range has changed after use, reset the sensor distance as above.
Cold
1 3/8" - 1 1/2"
1 9/16" - 2"


Produkt Specifikationer

Mærke: Franke
Kategori: Ikke kategoriseret
Model: HHF23T

Har du brug for hjælp?

Hvis du har brug for hjælp til Franke HHF23T stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Franke Manualer

Franke

Franke HHF23T Manual

1 Juli 2025
Franke

Franke IWC2104 Manual

24 Juni 2025
Franke

Franke FMA 654 I F BK Manual

27 December 2024
Franke

Franke CUX11019 Manual

26 December 2024
Franke

Franke PTX110-25 Manual

26 December 2024
Franke

Franke PTX110-28 Manual

26 December 2024
Franke

Franke FSM 654 I B BK Manual

18 December 2024
Franke

Franke ANX220 Manual

8 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer