Fredenstein U1631D Manual


Læs gratis den danske manual til Fredenstein U1631D (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 43 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 22 anmeldelser. Har du et spørgsmål om Fredenstein U1631D, eller vil du spørge andre brugere om produktet?

Side 1/5
U1631D
16 Channel
Peak Meter
with DANTE
Operating Manual
Fredenstein U1631D 16 Channel Dante Meter
The Fredenstein U1631D is a 16 channel peak meter calibrated in dBfs (dB of digital full scale).
Each of the 16 bar graphs consists of 31 LEDs. The resolutions is from 0 dB to -10 dB in 1 dB
steps, from -10 dB to -30dB in 2 dB steps, and from -30 dB to -60 dB in 3 dB steps. The “OVER”
LED (0dBfs) is red, from -1 dBfs to -10dBfs LEDs are yellow and below -10 dBfs green. All the
bar graphs are non-multiplexed for flicker-free operation with an extremely high update rate of 10
kHz to avoid any delays in the visualization.
Two standard Ethernet connectors (RJ45) on the back-panel provide the DANTE* connectivity,
automatically switching between 100 M or 1 G depending on your networking equipment.
Installation:
Electrical Safety Warnings:
Do not open the enclosure, hazardous voltages are present inside!
There are no user serviceable parts inside.
If you need to replace the mains fuse, make sure the replacement has the same
rating (2AT 250V, slow blow).
Front View:
Fredenstein U1631D Manual V1.0 Dec 28, 2019 Page 2


Produkt Specifikationer

Mærke: Fredenstein
Kategori: Ikke kategoriseret
Model: U1631D

Har du brug for hjælp?

Hvis du har brug for hjælp til Fredenstein U1631D stil et spørgsmål nedenfor, og andre brugere vil svare dig