Freedom Berto Manual

Freedom Lys Berto

Læs gratis den danske manual til Freedom Berto (1 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Freedom Berto, eller vil du spørge andre brugere om produktet?

Side 1/1
Specifications:
230-240V AC 50Hz
IP20-Indoor Use only
E27 MAX 40W
E27 Max.10W (bulb not included)
Class II protection
Page 1 of 1
www.freedomfurniture.co.nz
BERTO TABLE LAMP
Thank you for purchasing the Before you begin to assemble your new lamp,Berto Table Lamp.
please check to ensure that all hardware and parts have been supplied. This page lists all contents
included in the carton(s).
Follow instructions closely as deviation from them may present a possible safety risk and may
void your warranty.
It is recommended that assembly is done on a so surface such as carpet to avoid any damage. If
you experience any problems with your new purchase please phone Freedom Customer
Service(FCS) on 1300 135 588 (Australia) or 0800 469 327 (New Zealand)
Care Information:
Periodically check and re-tighten all fasteners.Wipe down surfaces using a clean cloth weekly.
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced
by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
Ensure screws are fastened firmly as small parts may present a choking hazard.
Replacing the bulb:
Disconnect the plug from the electrical supply and allow the bulb and lamp to cool down,
Replace the bulb with an Incan or .E27 MAX 40W E27 MAX 10W LED
Re-connect the supply and turn on.
24302098
LED


Produkt Specifikationer

Mærke: Freedom
Kategori: Lys
Model: Berto

Har du brug for hjælp?

Hvis du har brug for hjælp til Freedom Berto stil et spørgsmål nedenfor, og andre brugere vil svare dig