Fujitsu CG01000-296501 Manual

Fujitsu Tastatur CG01000-296501

Læs gratis den danske manual til Fujitsu CG01000-296501 (2 sider) i kategorien Tastatur. Denne vejledning er vurderet som hjælpsom af 45 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 23 anmeldelser. Har du et spørgsmål om Fujitsu CG01000-296501, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

P3PC-6661-01EN

Happy Hacking Keyboard

Professional Classic

(US Layout/Non-Printed)

User’s Guide

* P 3 P 1 EC - 6 6 6 1 - 0 N *

Part Names and Functions

Front

Back

Bottom

Part Name Description

DIP Switches Used to switch the setting mode.

For details, refer to “Switching the Setting Mode”.

Tilt Stands Used to adjust the height of the keyboard.

For details, refer to “Adjusting the Height of the Keyboard”.

Introduction

Thank you for purchasing Happy Hacking Keyboard Professional Classic (US Layout/

Non-Printed). Please read this User's Guide and use this product safely and correctly. Be sure

to read and understand "Safety Precautions" (a separate manual) before using the keyboard.

Mac, Mac OS, and macOS are trademarks of Apple Inc.

Other company names and product names are the registered trademarks or trademarks

of the respective companies.

ⒸPFU Limited 2019 October 2019

1 2

Part Name Description

LED

Indicator

Lit in blue: Caps Lock is on.

Turned off: Caps Lock is off.

Part Name Description

USB Type-C

Connector

Use the USB cable to connect

this product to a computer.

3 4

Establishing a Connection with a Computer

1 Connect the USB cable to the USB Type-C connector on this prod-

uct and a USB port on a computer.

2 When this product is recognized on the device, follow the instruc-

tions displayed in the window to install the driver software.

⇒A connection with the computer is established.

ATTENTION

Depending on the device that you use, this product may not be recognized when the

device resumes from a suspended status.

In such a case, disconnect the USB cable and then connect it again.

Switching the Setting Mode

Switch the setting mode according to the device that you use. By using the DIP switches

on the bottom of the keyboard, you can change the keyboard setting mode. The HHK

mode is set as the factory default.

You can also change some key codes. To change the settings for the DIP switches, use

a tool such as a ﬂathead screw driver.

ATTENTION

Be sure to disconnect the USB cable before setting any of the DIP switches. Even if you set a DIP

switch while the keyboard is connected via the USB cable, the setting you changed is not applied.

1 Remove the DIP switch cover on the bottom of the keyboard in the

direction of the arrow.

The gure below shows ON/OFF for each DIP switch.

DIP Switch Cover

OFF

(Factory Default)

2 Switch the setting mode by referring to the tables below.

DIP Switch Setting Mode

SW1 SW2

OFF OFF HHK mode Windows®

ON OFF Win mode

OFF ON Mac mode Mac OS

ON ON

DIP Switch Status Key Function

SW3 (*1) OFF Delete Delete

ON Delete BS (Back Space)

SW4 OFF Left ◇ Left ◇

ON Left ◇ Fn

DIP Switch Status Key Function

SW5 OFF Alt Alt

◇ ◇ (*2)

ON Alt ◇ (*2)

◇ Alt

SW6 OFF Power Saving Enabled (*3)

ON Power Saving Disabled (*4)

*1: In Mac mode, SW3 is disabled.

*2: In Win mode, ◇ functions as the [Windows] key.

In Mac mode, ◇ functions as the [Command] key.

*3: When Power Saving Enabled is set, the device in use cannot be resumed from

the suspended status by pressing a key.

*4: Power Saving Disabled consumes power for the device in use, faster than Pow-

er Saving Enabled.

3 Attach the DIP switch cover back. When attaching the cover, make

sure you push it until it locks in place.

ATTENTION

To return from a suspended status using the keyboard, you need to change the Pow-

er Management settings in the properties of the keyboard in Device Manager on the

operating system.

USB Type-C Connector

LED Indicator

System Requirements

This product can be used with the following computers or devices.

・ Computers with Windows® (Windows® 7/Windows® 8.1/Windows® 10) installed

・ Computers with Mac OS (macOS 10.12 or later) installed

Checking the Items in the Package

Make sure that all items shown below are included in the package:

□Keyboard (x1)

□USB cable (x1)

□Safety Precautions (x1)

□User's Guide (this manual) (x1)

If items other than those shown above are included in the package, keep them as well.

Treat the items that are included in the package with care. Retain the box and any pack-

aging material as they would be needed to protect the keyboard should it be necessary

to return the item in the event of a warranty claim.

If you ﬁnd that an item is missing or defective, contact the distributor/dealer where you

purchased this product.

Tilt Stands

DIP Switches

Daily Care

If this product gets dirty, wipe it with a dry

cloth.

ATTENTION

To avoid deterioration and discolor-

ation, never use alcohol or any other

volatile solutions.

Specications

Item Speciﬁcation

Key

Speciﬁ-

cations

Electrostatic capacitive

switch

Step sculpture

Key pitch: 19.05 mm

Ambient

Tempera-

ture

5 to 35°C

Ambient

Humidity

20 to 80 RH％

(non condensing)

Dimen-

sion

294 mm (W) x 110 mm (D) x

40 mm (H)

Weight Approx. 530 g

Cable

Length

1.8 m

5 6

Adjusting the Height of the Keyboard

The tilt mechanism is equipped on the

bottom of the keyboard, allowing you to

adjust the height at two levels. Raise one

of the tilt stands that suits you until it locks

in place. Use the same tilt stands on the

right and left sides.

Low

Middle

High

Notice

・ Copying of the contents of this document in whole or in part is prohibited under the

・ The contents of this document are subject to change without notice.

Regulatory Model PD-KB401

Troubleshooting

For troubleshooting tips for this product,

refer to the following website:

www.hhkeyboard.us

Assigning the

Mac OS

Keys

The Mac OS keys such as the [Command] key are assigned to keys on the keyboard as

shown below.

These assignments are enabled only when the setting mode is Mac mode.

［Command］［Option］［Command］［Option］

The multimedia keys are assigned as shown below. These keys must be pressed together with

［Volume Down］

［Volume Up］

［Mute］［Eject］

How to Use the [Fn] Key

To use the codes that are shown on the front facing side of the keys such as F1 to F12,

Pg Up (Page Up), Caps, and arrows (cursor), hold down Fn and press the relevant key.

Make sure that available codes vary depending on the keyboard mode.

For details, refer to the following table.

Key

Symbol on the

Side Facing

the Front

Meaning Setting Mode

HHK

mode

Win

mode

Mac

mode

1 to = F1 to F12 F1 to F12 ○ ○ ○

\ Ins Insert ○ ○ ○

` Del Delete ○ ○ ○

Delete BS

Clear

Back Space ○ ○ −

Clear (keypad) − − ○

I PSc/SRq Print Screen/System Request ○ ○ ○

O ScrLk Scroll Lock ○○○

P Pus/Brk Pause/Break ○ ○ ○

K Home Home ○ ○ ○

L PgUp Page Up ○ ○ ○

, End End ○○○

. PgDn Page Down ○○○

Tab Caps Caps Lock (*1)− ○ ○

Return

Enter

Enter (keypad) − − ○

N＋＋ (keypad) − ○ ○

M− − (keypad) − ○ ○

H＊＊ (keypad) − ○ ○

J / / (keypad) − ○ ○

[↑ ↑ ○ ○ ○

/↓ ↓ ○ ○ ○

;← ← ○ ○ ○

 → → ○ ○ ○

Vol

Volume Down − − ○

Key

Symbol on the

Side Facing

the Front

Meaning Setting Mode

HHK

mode

Win

mode

Mac

mode

Vol

Volume Up − − ○

Mute

Mute − − ○

Eject

Eject − − ○

Esc

Power

Power (*2)− − ○

Right Stop Stop◇ ○ − −

○: Supported −: Not supported

*1: You need to press

Shift

at the same time depending on the driver and the operating system.

*2: It is not possible to turn the power on.

Codes in italics are only for Mac OS.

Key Combinations for Switching the Setting Mode

Switching the Setting Mode Key Combination (Press the keys in the order in which

they are displayed.)

Switching to the Win mode (*1)

Fn + Control + W

Switching to the Mac mode Fn + Control + M

*1: When the DIP switches are set for the HHK mode, the setting mode is switched to the HHK mode.

Produkt Specifikationer

Mærke:	Fujitsu
Kategori:	Tastatur
Model:	CG01000-296501

Har du brug for hjælp?

Hvis du har brug for hjælp til Fujitsu CG01000-296501 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Tastatur Fujitsu Manualer

Fujitsu E61000 Manual

1 Oktober 2024

Fujitsu KB410 Manual

4 August 2024

Fujitsu Happy Hacking Manual

28 Juli 2024

Fujitsu CG01000-296501 Manual

15 Juli 2024

Fujitsu CG01000-297101 Manual

11 Marts 2024

Fujitsu Happy Hacking Professional Hybrid Manual

24 December 2023

Fujitsu KB915 Manual

25 Juni 2023

Fujitsu CG01000-296401 Manual

19 Juni 2023

Tastatur Manualer

Nyeste Tastatur Manualer

Kawai CP185 Manual

13 September 2025

Kawai MR380C Manual

13 September 2025

Ibm Fingerprint USB, US Manual

13 September 2025

13 September 2025

13 September 2025

13 September 2025

13 September 2025

13 September 2025

12 September 2025

12 September 2025