To use the codes that are shown on the front facing side of the keys such as F1 to F12, Pg Up (Page
Up), Caps, and arrows (cursor), hold down Fn and press the relevant key. Make sure that available
codes vary depending on the keyboard mode. For details, refer to the following table.
Key Symbol on the
Side Facing the
Front
Meaning Setting Mode
HHK
mode
Win
mode
Mac
mode
1 to = F1 to F12 F1 to F12 ○○○
\ Ins Insert ○ ○ ○
` Del Delete ○ ○ ○
Delete BS
Clear
Back Space ○ ○ −
Clear (keypad) − − ○
I PSc/SRq Print Screen/System Request ○ ○ ○
O ScrLk Scroll Lock ○ ○ ○
P Pus/Brk Pause/Break ○ ○ ○
K Home Home ○○○
L PgUp Page Up ○ ○ ○
, End End ○ ○ ○
. PgDn Page Down ○ ○ ○
Tab Caps Caps Lock (*1)− ○ ○
Return
Enter
Enter (keypad) − − ○
N＋ ＋ (keypad) − ○ ○
M− − (keypad) − ○ ○
H＊ ＊ (keypad) − ○ ○
J / / (keypad) − ○ ○
[↑ ↑ ○ ○ ○
/↓ ↓ ○ ○ ○
;← ← ○ ○ ○
→ → ○ ○ ○
A
Vol
_
Dn
Volume Down − − ○
S
Vol
_
Up
Volume Up − − ○
D
Mute
Mute − − ○
Key Symbol on the
Side Facing the
Front
Meaning Setting Mode
HHK
mode
Win
mode
Mac
mode
F
Eject
Eject − − ○
Esc
Power
Power (*2)− − ○
Right Stop Stop◇ ○ − −
○: Supported −: Not supported
*1: You need to press Shift at the same time depending on the driver and the operating system.
*2: It is not possible to turn the power on.
Codes in italics are only for Mac OS.
Key Combinations for Switching Pairing Modes
and Operation Modes
Operation Key Combination
(Press the keys in the order shown below,
starting with the key on the far left.)
LED
Registering pairing infor-
mation Fn + Q
Fn + Control + 1 to 4
Blinks in blue (twice per second)
Blinks in blue fast (four times
per second)
Deleting all of the pairing
information Fn + Q
Fn + Z + Delete
Blinks in blue (twice per second)
Blinks in orange Turned
off (Power off)
Deleting pairing informa-
tion individually Fn + Q
Fn + Control + Delete + 1 to 4
Blinks in blue (twice per second)
Blinks in orange Turned
off (Power off)
Switching the connected
device (Bluetooth) Fn + Control + 1 to 4 Lit in blue Turned off
Switching the connection
to a USB connection Fn + Control + 0Lit in blue Turned off
Canceling the pairing mode
Fn + XLit in blue Turned off
Switching to the Win mode
(*1) Fn + Control + WTurned Off
Switching to the Mac mode
Fn + Control + MTurned Off
*1: When the DIP switches are set for the HHK mode, the setting mode is switched to the HHK mode.
9
10
11
12
13
14
15
16
Deleting Pairing Information
Individually
1 Hold down Fn and press Q to
switch to the pairing standby mode.
2 Hold down Fn , Control , and
Delete in this order, and then press
the number key ( 1 to 4) that the
pairing information that you want to
delete is assigned to.
The LED indicator lights in orange while the
pairing information is being deleted and enters
OFF mode when the deletion is complete.
Deleting Pairing Information
All at Once
1 Hold down Fn and press Q to
switch to the pairing standby mode.
2 Hold down Fn and Z in this order,
and then press Delete .
The LED indicator lights in orange while the
pairing information is being deleted and enters
OFF mode when the deletion is complete.
Notice
・ Copying of the contents of this document in whole or in part is prohibited under the copyright law.
・ The contents of this document are subject to change without notice.
Regulatory Model PD-KB800
Assigning the Mac OS Keys
The Mac OS keys such as the [Command] key are assigned to keys on the keyboard as shown below.
These assignments are enabled only when the setting mode is Mac mode.
Connect this product to the device that you use via a Bluetooth connection.
To use a Bluetooth USB adapter, make the Bluetooth function available by referring to the manual of
the Bluetooth USB adapter.
After connecting this product to a device, installing the driver software starts. It may take several min-
utes for this product to be ready for use. Wait for a while.
ATTENTION
• -Depending on the device that you use, you need to switch the setting mode of this product in ad
vance. For details, refer to
"Switching the Setting Mode"
.
• -Depending on the device that you use, this product may not be recognized when the device re
sumes from a suspended status. In such a case, turn this product off then back on.
1
Switching the Setting Mode of the Keyboard to the Pairing Mode
Making this product and your device able to communicate with each other by registering information
on the product with the device and information on the device with the product is called "pairing".
You can register the pairing information for up to four devices with this product by assigning the infor-
mation of each device to a number key from 1 to 4.
If you register the pairing information for multiple devices, you can switch to the device that you want to use easily.
For details about how to switch devices, refer to
"Switching to a Device That You Want to Use"
.
2
Connecting the Keyboard (with the Pairing Operation)
Connect this product to the device that you want to use by registering information on the product with
the device and information on the device with the product.
Switching to a Device That You Want to Use
When you turn on this product, it is automatically connected to the device that it was connected to last.
To switch to another device connected via Bluetooth, hold down
Fn
and
Control
in this order, and then
press the number key (
1
to
4
) that the pairing information for the desired device is assigned to.
At this time, the LED indicator lights in blue then turns off.
For details about how to register pairing information, refer to
"Connecting the Keyboard (via a Bluetooth
Connection)"
.
When a device is connected via a USB cable, you can switch the connection to a connection via a
USB cable by holding down Fn and Control in this order, and then pressing 0.
To check which number key the pairing information has been assigned to for the currently connected
device, press the power switch lightly.
This leads the LED indicator to blink. The number of blinking times indicates the number key that is
assigned.
Blinks once: 1 key Blinks twice: 2 key
Blinks three times: 3 key Blinks four times: 4 key
When a connection is established via a USB cable, the LED indicator lights up for one second.
Connecting the Keyboard (via a USB Connection)
1 Connect a USB cable to the USB Type-C connector on this product and a USB
port on the device that you use.
2 When this product is recognized on the device, follow the instructions dis-
played in the window to install the driver software.
⇒A connection is established. At this time, the LED indicator turns off.
Note that, when a connection is established via Bluetooth or a connection was established via Blue-
tooth last time, you can switch the connection to a connection via a USB cable by holding down Fn
and Control in this order, and then pressing 0.
Windows® 10
1 Right-click the [Start] menu, and
then click [Settings].
⇒The [Windows Settings] window is
displayed.
2 Click [Devices].
⇒The [Bluetooth & other devices] window
appears.
3 Click [Add Bluetooth or other de-
vice].
⇒The [Add a device] window appears.
4 Click [Bluetooth].
5 Click [HHKB-Hybrid_n (*1)], and
then click the [Next] button.
*1: n indicates a number key from 1 to 4,
which is used to register pairing infor-
mation.
⇒A several digit number for pairing is
displayed.
6 On this product, enter the displayed
number for pairing, and then press
Return .
⇒A connection is established.
At this time, the LED indicator turns off.
Windows® 8.1
1 Click [ ] on the lower left side of
the Start screen and select [Control
Panel] under [Windows System].
To display [ ], move the mouse
cursor.
⇒The [Control Panel] window appears.
2 Click [Add devices].
⇒The [Add a device] window appears.
3 Click [HHKB-Hybrid_n (*1)], and
then click the [Next] button.
*1: n indicates a number key from 1 to 4,
which is used to register pairing infor-
mation.
⇒A several digit number for pairing is
displayed.
4 On this product, enter the displayed
number for pairing, and then press
Return .
⇒A connection is established.
At this time, the LED indicator turns off.
Mac OS
The menu names and window names vary de-
pending on the operating system version.
1 Click the [Apple] menu and select
[System Preferences] [Keyboard].g
⇒The [Keyboard] window appears.
2 Click [Set Up Bluetooth Keyboard].
⇒The [Devices] window appears.
3 Click [HHKB-Hybrid_n (*1)], and
then click the [Connect] button.
*1: n indicates a number key from 1 to 4,
which is used to register pairing infor-
mation.
⇒A several digit number for pairing is
displayed.
4 On this product, enter the displayed
number for pairing, and then press
Return .
5 Click the [Connect] button.
⇒When "Connected" is displayed, the
connection is established.
At this time, the LED indicator turns off.
6 When the [Keyboard Setup Assis-
tant] window appears, click [Contin-
ue].
7 Follow the instructions on the win-
dow that appears.
8 When [Select the Keyboard Type]
is displayed, select [ANSI (United
States and others)] and click the
[Done] button.
iOS/iPadOS
Menu names and screen names vary depending
on the iOS or iPadOS version.
1 Tap [Settings] g [Bluetooth].
2 Turn on [Bluetooth].
3 Tap [HHKB-Hybrid_n (*1)].
*1: n indicates a number key from 1 to 4,
which is used to register pairing infor-
mation.
⇒A several digit number for pairing is
displayed.
4 On this product, enter the displayed
number for pairing, and then press
Return .
⇒When "Connected" is displayed for
[HHKB-Hybrid_n], a connection is es-
tablished.
At this time, the LED indicator turns off.
AndroidTM
Menu names and screen names vary depending
on the device that you use.
1 Tap [Settings] [Connected devic-g
es].
2 Tap [Pair new device].
3 Tap [HHKB-Hybrid_n (*1)].
*1: n indicates a number key from 1 to 4,
which is used to register pairing infor-
mation.
⇒A several digit number for pairing is
displayed.
4 On this product, enter the displayed
number for pairing, and then press
Return .
⇒When "HHKB-Hybrid_n" is displayed in
[Available devices], the connection is
established.
At this time, the LED indicator turns off.
Establishing a Connection
for the First Time
Hold down the power switch of this product (for
1 second or longer).
⇒The power turns on, and it automatically
enters pairing mode.
At this time, the LED indicator blinks in blue
fast.
The pairing information for a device that you
want to use is assigned to 1.
HINT
If you connect a USB cable to supply power
when no pairing information is registered,
the keyboard is automatically connected to
the device via a USB connection. If you want
to switch to a Bluetooth connection, refer to
"Adding a Device That You Want to Use"
and
perform step 2 onwards.
Adding a Device That You Want to Use
1 Hold down the power switch of this
product (for 1 second or longer).
⇒The power turns on, and the LED indi-
cator lights in blue then turns off.
2 Hold down Fn and then press Q.
⇒The keyboard enters pairing standby
mode, and the LED indicator blinks in blue.
3 Hold down
Fn
and
Control
in this order,
and then press the number key (
1
to
4
)
that is used to register pairing information.
⇒The keyboard enters pairing mode, and the LED
indicator blinks in blue fast.
The pairing information for a device that you want to
use is assigned to the number key that you specified.
If you specify the same number key as a number key which
has already been used to register pairing information for
another device, the device with the pairing information that
is registered more recently will be the one that can be used.
