Gamber-Johnson 7160-0857 Manual

Gamber-Johnson Tastatur 7160-0857

Læs gratis den danske manual til Gamber-Johnson 7160-0857 (2 sider) i kategorien Tastatur. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Gamber-Johnson 7160-0857, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

Rev.B

INST-727

required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications

Product Mounting Disclaimer

Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage

of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson

products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is

and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.

INSTALLATION INSTRUCTIONS

Product Revision Form

If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868

Printing Spec:

PS-001

LOW PROFILE QUICK RELEASE KEYBOARD TRAY

7160-0857

The 7160-0857 keyboard tray is a keyboard mount that can be used to hold just

about any size keyboard. The keyboard tray consists of the VESA75 hole

pattern. Attach most keyboards by utilizing the AMPS hole patterns and the

provided flat head screws. Strips of adhesive backed Dual Lock are provided in

the hardware bag for customers that choose to use the keyboard tray with a

keyboard that does not have the AMPS pattern.

Tools Needed

Phillips head screw driver

1/2 inch wrench

To remove the top quick release plate -

press and hold the latch button while lifting

slightly and sliding in the shown direction.

1/2

Slide

Press

Lift

Gamber

Johnson, LLC

Attach the bottom plate of the quick release keyboard tray to a Gamber-Johnson

Clevis (Figure 1), using a 1/2 inch wrench and the 1/4" lock washers, and 1/4-20 x

.50 hex head screws provided in the hardware bag 7120-0734.

Attach the keyboard to the tray using (4) #8-32 x .50 phillips flat head screws or

dual lock adhesive strips.

Mounting the Quick Release Keyboard Tray

FIGURE 1: CLEVIS MOUNT

2/2

Dual Lock

Adhesive Strips

(4) #8-32 x .50

Phillips Flat Head Screw

Keyboard Tray

Bottom Plate

Clevis

(4) 1/4" Split Lock Washers

(4) 1/4-20 x .50

Hex Head Cap Screws

Produkt Specifikationer

Mærke:	Gamber-Johnson
Kategori:	Tastatur
Model:	7160-0857
Bredde:	147.3 mm
Dybde:	184.2 mm
Højde:	31.2 mm
Vægt:	1040 g
Produktfarve:	Sort
VESA montering:	Ja
Panel montering grænseflade:	75 x 75 mm