GAO EMT445PCS Manual

GAO Ikke kategoriseret EMT445PCS

Læs nedenfor 📖 manual på dansk for GAO EMT445PCS (7 sider) i kategorien Ikke kategoriseret. Denne guide var nyttig for 23 personer og blev bedømt med 4.5 stjerner i gennemsnit af 2 brugere

Side 1/7

GREAT BRITAIN



Digital Timer Switch

Article number: 36-2898

Model: EMT445PCS

Please read the entire instruction manual before using and

save it for future reference. We apologise for any text or

photo errors and any changes of technical data. If you have

any questions concerning technical problems please con-

tact our Customer Service Department.

1. Functions

1. Timer switch with photocell for outdoor use. Ideal for

saving energy and for home safety.

2. Extra large, easily readable display.

3. Random function for turning lights on while you are out

to deter burglars.

4. Built-in photocell for automatic light controlled

operation.

5. Adjusts to summer/winter time.

2. Buttons and Functions

Description

Function

MENU Press to enter the programming mode or

clock mode

OK Press to conrm setting. In normal time

mode: Press and hold in the button to en-

ter time setup mode. Press OK and then

[+/ ] to show summer time.

[+/ ] Press to advance the time.

In normal time mode: Press in the button

to change mode: ON – AUTO ON – OFF

– AUTO OFF

- /RND Press to reduce the time.

In programming mode: Press to activate/

deactivate the random function (RND).

RST Reset/delete all settings. After a few se-

conds the time will be reset to “0:00”.

Photocell Light level sensor

3. Setting the time

1. In normal time mode: Press and hold in OK for 2 seconds

(until the the time digits on the display start to ash).

2. Press [+/ ] or - /RND to set the correct time, press

OK to conrm your setting.

3. “00” (minutes) will ash on the display, press [+/ ] or -

/RND to set the minutes, press OK to conrm the setting.

4. The current time setting will ash on the display. Press

MENU to exit the time setup mode. The set time will

now be displayed.

5. Activating summer time. Press OK, [+/ ] will

appear on the display. The time will advance an hour.

Press OK again to return to normal time display mode

(deactivate summer time).

Note! The display must be in normal time display mode for

time settings to be made. If the display is in programming

mode: Press OK twice to return to normal time display mode.

4. Programming

Photocell

1. In normal time mode: Press MENU. The display

indicates that you have entered the programming

mode, ashes.

- shows the photocell’s sensitivity setting (the

lower the setting the more sensitive the photocell).

- “ON” indicates that the photocell has activated the

timer switch

- “OFF” indicates that the photocell has deactivated

the timer switch.

2. Press [+/ ] or - /RND to set the photocell

sensitivity, press OK to conrm your setting.

Start time

3. Set a start time for the timer switch: “00” for the hours

will ash on the display. Press or - /RND to [+/ ]

set the desired start time, press OK to conrm your

setting.

4. “00” for the minutes will ash on the display. Press

[+/ ] or - /RND to set the desired start time

minutes, press OK to conrm your setting.

Stop Time

5. “00” for the hours will ash on the display. Repeat

steps 3 and 4.

6. Press OK to conrm the setting. Press MENU to exit

the setup and return to normal time display mode.

Note!

• When the timer switch is setup correctly and activated,

AUTO ON or AUTO OFF will be displayed.

• When the timer switch is in programme mode, the

switch is activated when the light fades and the display

shows AUTO ON. The timer switch turns off when the

light gets stronger and the display shows AUTO ON.

5. Setting the random function

for the photocell

1. This only works in the programming mode when AUTO

ON or AUTO OFF is shown on the display. Press

-/RND to activate the random function.

2. RND appears on the display when the random function

is activated.

3. In random mode the timer switch turns on/off randomly

for 10 to 26 minutes.

4. If the timer switch is in AUTO OFF mode, the photocell

will not react to the light level for 10 to 26 minutes. If

after this time the light level is high, the timer switch will

remain off until the photocell senses that the light level

has dropped.

5. In the random mode the timer switch will be activated

for 10 to 26 minutes, it will then be deactivated for 10

to 26 minutes.

6. These on/off operations will continue until you turn off

the random function.

7. Turn off the random function by pressing -/RND again.

Note! When the random function is activated it controls the

timer switch and overrides the AUTO ON and AUTO OFF

functions.

6. Bypass or return to

programmed setting

1. Press to return to a programmed setting or [+/ ]

bypass it. The display will show current setting:

• ON: This bypasses the programmed setting, the

timer switch is on all the time.

• AUTO ON / AUTO OFF: The programmed setting

will control the light.

• OFF: This bypasses the programmed setting, the

timer switch is off all the time.

2. Erase all programmes like this: Push RST. Note! If this

is done, all programming will have to be done again.

7. Connection

1. Prepare the timer switch as instructed above.

2. Turn off the device/s that you are going to connect the

timer switch to.

3. Connect the device/s to the timer switch socket, and

then plug the timer switch into the wall socket.

4. Switch on the connected device/s.

5. The connected device/s will now be controlled by the

programmed settings (or bypassed by pressing [+/ ].

8. Note

1. Do not position the timer switch where it could be

inuenced by street lighting or similar, interfering with

the photocell.

2. The backup batteries will be fully charged after

approximately 2 hours connection to the mains.

9. Protect the environment

Sort your waste and recycle products instead of throwing

them away. All electronic products, batteries and all packa-

ging material should be sorted and handled according to

local environmental regulations.

10. Specications

Connection: 230 V~, 50 Hz, 16 A, 3680 W.

Operating temperature: -25°C ~ +55°C

The shortest time setting for operation: 1 minute

Protection class: IP44 (approved for outdoor use)

ENGLISH

Photocell [RST] Reset

[MENU]

[OK]

Conrm

[- /RND] Reduce /

Random Function [+/ ] Increase /

Programme Mode

Produkt Specifikationer

Mærke:	GAO
Kategori:	Ikke kategoriseret
Model:	EMT445PCS

Har du brug for hjælp?

Hvis du har brug for hjælp til GAO EMT445PCS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret GAO Manualer

GAO EMT445PCS Manual

4 December 2022

GAO EMP600STV Manual

29 Oktober 2022

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

PetSafe Stay & Play PIF00-15001 Manual

2 Juni 2024

PetSafe SmartDoor Electronic Pet Entry Manual

2 Juni 2024

PetSafe Pawz Away PWF00-11923 Manual

2 Juni 2024

LG Magic Remote AN-MR18BA Manual

2 Juni 2024

PetSafe PBC00-17281 Manual

2 Juni 2024

PetSafe Classic In-Ground Fence PIG00-17440 Manual

2 Juni 2024

PetSafe Classic In-Ground Fence PIG00-17441 Manual

2 Juni 2024

PetSafe Happy Ride Manual

2 Juni 2024

PetSafe Drinkwell PWW00-16777 Manual

2 Juni 2024

PetSafe Drinkwell PWW00-16468 Manual

2 Juni 2024