GAO EMW100D Manual

GAO Ikke kategoriseret EMW100D

Læs gratis den danske manual til GAO EMW100D (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 70 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 35.5 anmeldelser. Har du et spørgsmål om GAO EMW100D, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

English

GREAT BRITAIN

For consumer contact, please visit www.clasohlson.co.uk and click on customer service.

Ver. 201103

Extra Receiver with Dimmer

Art.no. 18-2039 Model EMW100D-UK

36-2347 EMW100D

Please read theentire instruction manual before use and save

it for future reference. Wereserve theright for any errors in text

or images and for making any necessary technical changes to

this document. Ifyou should have any questions concerning

technical problems please contact our Customer Services.

Product description

• Remote control socket receiver with dimmer function.

• Range up to 70 metres if unobstructed.

• A red LED on thereceiver comes on when it has been

turned on by thetransmitter. TheLED goes off when

thereceiver is turned off.

• The programmed channel is permanently saved in

thememory.

• Dimmer function memory. Thereceiver retains thelight

intensity setting for thenext time thereceiver is turned on.

Functions

Programming

1. Connectthereceiver to awall socket.

2. Press[ON/OFF/Dimmer/Learning code] twice in quick

succession until theLED on thereceiver starts ﬂashing.

3. Holdin [OFF] on thetransmitter for 2 seconds (until theLED

on thereceiver goes off) for thechannel you wish to use on

thereceiver. If[OFF] is released too early, theprogramming

will not work.

Note: Do not press thebuttons on thetransmitter too hard; light

pressure (just enough to light up theLED on thetransmitter) is all

that is needed. Ifyou press too hard theprogramming will not work.

Operation

• Press [ON] or [OFF] on thetransmitter to turn thedevice

plugged into thereceiver’s socket on or off.

• Press [ON/OFF/Dimmer/Learning Code] on thereceiver to

turn thedevice plugged into thereceiver’s socket on or off.

Dimmer switch

• Press and hold in [ON] on thetransmitter to increase

thelight intensity. Releasethebutton when thedesired

lightlevel has been reached.

• Press and hold in [OFF] to decrease thelight intensity. Release

thebutton when thedesired light level has beenreached.

• The light intensity can also be adjusted by holding in [ON/OFF/

Dimmer/Learning Code] on thereceiver. Thelight intensity will

increase and decrease alternatively. Releasethebutton when

thedesired light level has been reached.

• When thelight intensity has been programmed, thereceiver

will remember thesetting even when it has been switched

off using the[OFF] button. Thememory will, however, be

erased if thereceiver is unplugged from thewall socket.

Connection

• Set thepower switch of theelectrical device that is to be

connected to thereceiver to . OFF

• Connect theelectrical device to thereceiver before it is

connected to apower point.

• Turn thedevice on by setting its power switch to / .ON I

Safety

• Only connect electrical devices rated for thevoltage

speciﬁed below.

• Never use thedimmer function on appliances that are

not designed for use with adimmer switch. Onlyuse

thedimmer function with dimmable light bulbs such as

incandescent ﬁlament bulbs, etc.

Disposal

Follow local ordinances when disposing of this product. Ifyou

are unsure how to proceed, contact your local authority.

Specifications

Voltage 230 V AC, 50 Hz, 16 A

Max power 50–300 W (incandescent bulbs)

Protection class IP20

Frequency 433.92 MHz

Range Up to 70 metres (unobstructed)

Note:

• Other wireless equipment using thesame frequency can

reduce thetransmission range.

• The range of all wireless equipment depends on

thetype of obstacles located between thetransmitter

and thereceiver (e.g. aconcrete wall will interfere with

thesignal more than aplasterboard wall).

If you experience problems, try thefollowing:

• Turn off any existing wireless equipment to see if that

could be causing theproblem.

• Move thewireless equipment and/or shorten

thedistance and reduce thenumber of obstacles (walls,

furniture, etc) between thetransmitter and receiver.

1. [ON/OFF/Dimmer/Learning Code]

• Press once to switch between

ON OFF and .

• Press twice to enter

theprogramming mode.

• Press and hold in to start

thedimmer function

adjustmentmode.

2. LED

• The LED ﬂashes: The receiver

isready for programming.

• The LED shines steadily:

Thereceiver is switched . ON

• The LED is off: The receiver

isswitched .OFF

1 2

Produkt Specifikationer

Mærke:	GAO
Kategori:	Ikke kategoriseret
Model:	EMW100D

Har du brug for hjælp?

Hvis du har brug for hjælp til GAO EMW100D stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret GAO Manualer

9 August 2024

6 August 2024

4 December 2022

29 Oktober 2022

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Waterstone 7800 Manual

11 December 2025

Kwikset 258 Manual

11 December 2025

Schlage F170 Manual

11 December 2025

Moen Align 7565EV Manual

11 December 2025

Energy Sistem ESG M3 Neon Manual

11 December 2025

ALNO MC10244 Manual

11 December 2025

JET TAK-ZX Manual

11 December 2025

Crosley Nashville CF1165 Manual

11 December 2025

Waterstone 1455 Manual

11 December 2025

Laica NE2015 Manual

11 December 2025