Garde XL 181TSXLP732 Manual

Garde XL Skæremaskine 181TSXLP732

Læs gratis den danske manual til Garde XL 181TSXLP732 (1 sider) i kategorien Skæremaskine. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 3.5 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Garde XL 181TSXLP732, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

QUICK START GUIDE

SERRATED BLADE TOMATO SLICERS

MODELS

181TSXL316 - 3/16" Slices

181TSXL732 - 7/32" Slices

181TSXL14 - 1/4" Slices

181TSXL38 - 3/8" Slices

SAFETY INSTRUCTIONS

CAUTION

Be careful when handling and operating the machine, as

the blades are very sharp. Always keep your hands away

from the blades.

PREPARATION

1. This unit comes fully assembled.

2. Place the unit on a sturdy work surface.

3. The guides for the pusher assembly located along the

sides of the cutting board need to be lubed regularly to

keep your slicer operating smoothly. Using a food grade

sanitary lube (such as 401PETROLGEL) will ensure you

get a clean slice every time.

OPERATION

1. Pull the handle toward you and place a tomato on the

slide board between the pusher plates and the blades.

2. Remove hands and ngers from the cutting area

and push the handle toward the blades with one

quick motion.

3. Remove the sliced tomato from the slide board

and repeat as necessary.

BLADE TENSION INSTRUCTIONS

1. Ensure that the blade holder assembly is rmly

mounted on the frame with the sharp side of the

blades toward the pusher assembly.

2. Be sure the hex head screws on the right side of the

blade holder are tight.

3. Tighten the hex head screws on the left end of the

blade holder until the blades “hum” when strummed

or plucked.

4. Check the blade tension each time the machine is used.

CLEANING

NOTE: Avoid using alkaline cleaners as they may dull the

nish and cause pitting.

1. Remove the thumb screws and the slide stop from the

pusher assembly. Pull the pusher off the end of the

slide board.

2. Remove the mounting screws from the slide board and

blade shield.

3. To totally disassemble the pusher assembly, remove

the acorn and hex nuts on the top of the stack and

carefully remove the pusher plates and spacers.

Remove the additional screws if you wish to

disassemble the guide plate.

4. To reassemble, reverse the procedure.

NOTE: Always rinse the tomato slicer in cold or lukewarm

water after it has been washed in hot water.

Hot water makes the slide board expand which may

make it difcult to use the pusher assembly until

the slide board returns to room temperature.

NOTE: After reassembly, you must add tension back to

the blades.

REPLACEMENT PARTS

BLADE ASSEMBLIES

#181TSXLBD316 #181TSXLBD732 #181TSXLBD14 #181TSXLBD38

3/16" 7/32" 1/4" 3/8"

PUSHER HEAD ASSEMBLIES

#181TSXLP316 3/16"

#181TSXLP732 7/32"

#181TSXLP14 1/4"

#181TSXLP38 3/8"

ADDITIONAL PARTS

#181SUCCUPFT

Suction Cup

Foot

08/2023

Produkt Specifikationer

Mærke:	Garde XL
Kategori:	Skæremaskine
Model:	181TSXLP732

Har du brug for hjælp?

Hvis du har brug for hjælp til Garde XL 181TSXLP732 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Skæremaskine Garde XL Manualer

Garde XL 181TSXL732 Manual

17 September 2025

Garde XL 181XLDC1 Manual

17 September 2025

Garde XL 181XLDC14 Manual

17 September 2025

Garde XL 181TSXLP732 Manual

17 September 2025

Garde XL 181XLDC38 Manual

26 August 2025

Garde XL 181XLDC12 Manual

21 August 2025

Garde XL TSXL38 Manual

6 August 2025

Garde XL TSXL732 Manual

5 August 2025

Garde XL 181XLROTOSLICE Manual

5 August 2025

Garde XL TSXL14 Manual

5 August 2025

Skæremaskine Manualer

Nyeste Skæremaskine Manualer

Graef Sliced Kitchen SKS 900 Manual

16 September 2025

Zelmer Jola ZFS1016 Manual

13 September 2025

Zelmer Alicja ZFS1017 Manual

13 September 2025

Bosch GOP 40-30 Professional Manual

12 September 2025

Axis AX-S12 Ultra Manual

10 September 2025

Optimum RK-1600 Manual

10 September 2025

Electrolux TRK70 Manual

9 September 2025

Axis AX-S14 Ultra Manual

9 September 2025

Primo PS-12D Manual

9 September 2025

Graef Master M94 Manual

7 September 2025