Garmin GT23M-TH Manual

Garmin Ikke kategoriseret GT23M-TH

Læs gratis den danske manual til Garmin GT23M-TH (8 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Garmin GT23M-TH, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/8

Thru-Hull Transducer

Installation Instructions

Important Safety Information

WARNING

See the guide in the Important Safety and Product Information

product box for product warnings and other important

information.

The device must be installed with at least one of the included

anti-rotation bolts. Failure to do so could result in the device

rotating while the boat is moving and could cause damage to

your vessel.

You are responsible for the safe and prudent operation of your

vessel. Sonar is a tool that enhances your awareness of the

water beneath your boat. It does not relieve you of the

responsibility of observing the water around your boat as you

navigate.

CAUTION

Failure to install and maintain this equipment in accordance with

these instructions could result in damage or injury.

Always wear safety goggles, ear protection, and a dust mask

when drilling, cutting, or sanding.

NOTICE

When drilling or cutting, always check what is on the opposite

side of the surface.

This equipment should be installed by a qualified marine

installer.

To obtain the best performance and to avoid damage to your

boat, you must install the Garmin® transducer according to these

instructions.

Read all installation instructions before proceeding with the

installation. If you experience difficulty during the installation,

contact Garmin Product Support.

Registering Your Device

Help us better support you by completing our online registration

today.

• Go to .http://my.garmin.com

• Keep the original sales receipt, or a photocopy, in a safe

place.

Contacting Garmin Product Support

• Go to for in-country support www.garmin.com/support

information.

• In the USA, call 913-397-8200 or 1-800-800-1020.

• In the UK, call 0808 238 0000.

• In Europe, call +44 (0) 870 850 1241.

Loading the New Software on a Memory Card

You must copy the software update to a memory card.

1Insert a memory card into the card slot on the computer.

2Go to .www.garmin.com/support/software/marine.html

3Select next to “Garmin Marine Network with SD Download

card”.

4Read and agree to the terms.

5Select .Download

6If necessary, select or save and open the file.Run

7If necessary, select the drive associated with the memory

card, and select > .Next Finish

Updating the Device Software

Before you can update the software, you must obtain a

software-update memory card or load the latest software onto a

memory card.

1Turn on the chartplotter.

2After the home screen appears, insert the memory card into

the card slot.

NOTE: In order for the software update instructions to

appear, the device must be fully booted before the card is

inserted.

3Follow the on-screen instructions.

4Wait several minutes while the software update process

completes.

The device returns to normal operation after the software

update process is complete.

5Remove the memory card.

NOTE: If the memory card is removed before the device

restarts fully, the software update is not complete.

Tools Needed

• Drill

• 3 mm bit (1/8 in.)

• 9 mm bit (3/8 in.)

• 13 mm bit (1/2 in.)

• 25 mm spade bit (1 in.) (fiberglass hull)

• 29 mm spade bit (1 1/8 in.) (fiberglass hull)

• 32 mm spade bit (11/4 in.) (fiberglass hull)

• 32 mm hole saw (1 1/4

in.) (metal hull)

• Bandsaw or table saw

• Slip-joint pliers or crescent wrench

• Masking tape

• Marine sealant

• Epoxy or exposed core sealant (cored fiberglass hull)

About the Transducer

The transducer transmits and receives sound waves through the

water, and relays sound-wave information to your Garmin sonar

device.

Mounting Location Considerations

• On outboard and sterndrive vessels

À, the transducer should

be mounted in front of and close to the engine or engines.

• On inboard vessels Á, the transducer should be mounted in

front of and far away from the engine propeller and shaft.

• On step-hull vessels Â, the transducer should be mounted in

front of the first step.

May 2015 Printed in Taiwan 190-01774-02_0B

Produkt Specifikationer

Mærke:	Garmin
Kategori:	Ikke kategoriseret
Model:	GT23M-TH

Har du brug for hjælp?

Hvis du har brug for hjælp til Garmin GT23M-TH stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Garmin Manualer

Garmin Foretrex 701 Ballistic Edition Manual

12 August 2025

Garmin Approach CT1 Manual

26 Februar 2025

Garmin dēzl Headset 110 Manual

8 Februar 2025

Garmin Spectra LC302 Manual

9 Januar 2025

Garmin Spectra LC102 Manual

9 Januar 2025

Garmin dēzl Headset 210 Manual

14 November 2024

Garmin Inreach Messenger Plus Manual

11 November 2024

Garmin GMM 170 Manual

4 Oktober 2024

Garmin GMR 18 xHD Manual

4 Oktober 2024

Garmin Edge Power Mount Manual

3 Oktober 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

ELO E121405 Manual

2 December 2025

BakkerElkhuizen BE Flexible Dual Manual

2 December 2025

2 December 2025

2 December 2025

2 December 2025

2 December 2025

2 December 2025

Vevor W1.2×760 Manual

2 December 2025

Vevor XCW-160LS Manual

2 December 2025

Vevor SC13000 Manual

2 December 2025