Garmin Lidar Lite v3 Manual

Garmin Ikke kategoriseret Lidar Lite v3

Læs gratis den danske manual til Garmin Lidar Lite v3 (14 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 9 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 5 anmeldelser. Har du et spørgsmål om Garmin Lidar Lite v3, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/14
1
Lidar Lite v3 Operation Manual
and Technical Specications
Laser Safety
WARNING
This device requires no regular maintenance. In the event that the device
becomes damaged or is inoperable, repair or service must be handled by
authorized, factory-trained technicians only. Attempting to repair or service
the unit on your own can result in direct exposure to laser radiation and the
risk of permanent eye damage. For repair or service, contact your dealer or
Garmin® for more information. This device should not be modied or operated
without its housing or optics. Operating this device without a housing and
optics, or operating this device with modied housing or optics that expose the
laser source, may result in direct exposure to laser radiation and the risk of
permanent eye damage. Removal or modication of the diffuser in front of the
laser optic may result in the risk of permanent eye damage.
Use of controls or adjustments or performance of procedures other than those
specied in this documentation may result in hazardous radiation exposure.
Garmin is not responsible for injuries caused through the improper use or
operation of this product.
CAUTION
This device emits laser radiation. This Laser Product is designated Class 1
during all procedures of operation. This designation means that the laser is
safe to look at with the unaided eye, however it is advisable to avoid looking
into the beam when operating the device and to turn off the module when not
in use.
Documentation Revision Information
Rev Date Changes
0A 09/2016 Initial release
Table of Contents
Lidar Lite v3 Operation Manual and Technical Specications ������� 1
Laser Safety ......................................................................................................1
Documentation Revision Information ................................................................. 1
Specications ������������������������������������������������������������������������������������� 2
Physical .............................................................................................................2
Electrical ............................................................................................................2
Performance ......................................................................................................2
Interface .............................................................................................................2
Laser ..................................................................................................................2
Connections ���������������������������������������������������������������������������������������� 2
Wiring Harness ..................................................................................................2
Connector ..........................................................................................................2
Connector Port Identication .......................................................................2
I2C Connection Diagrams .................................................................................3
Standard I2C Wiring ....................................................................................3
Standard Arduino I2C Wiring .......................................................................3
PWM Wiring ................................................................................................. 3
PWM Arduino Wiring....................................................................................3
Operational Information ��������������������������������������������������������������������� 4
Technology ........................................................................................................4
Theory of Operation ...........................................................................................4
Interface .............................................................................................................4
Initialization ..................................................................................................4
Power Enable Pin ........................................................................................4
I2C Interface ................................................................................................4
Mode Control Pin .........................................................................................4
Settings ........................................................................................................ 4
I2C Protocol Information �������������������������������������������������������������������� 6
I2C Protocol Operation ......................................................................................7
Register Denitions ...........................................................................................7
Control Register List ....................................................................................7
Detailed Control Register Denitions ........................................................... 8
Frequently Asked Questions ����������������������������������������������������������� 12
Must the device run on 5 Vdc? Can it run on 3.3 Vdc instead? ....................... 12
What is the spread of the laser beam? ............................................................ 12
How do distance, target size, aspect, and reectivity effect returned signal
strength? ..........................................................................................................12
How does the device work with reective surfaces? .......................................12
Diffuse Reective Surfaces ........................................................................12
Specular Surfaces .....................................................................................12
How does liquid affect the signal? ...................................................................13
2
Specications
Physical
Specication Measurement
Size (LxWxH) 20 × 48 × 40 mm (0.8 × 1.9 × 1.6 in.)
Weight 22 g (0.78 oz.)
Operating temperature -20 to 60°C (-4 to 140°F)
Electrical
Specication Measurement
Power 5 Vdc nominal
4.5 Vdc min., 5.5 Vdc max.
Current consumption 105 mA idle
135 mA continuous operation
Performance
Specication Measurement
Range (70% reective
target)
40 m (131 ft)
Resolution +/- 1 cm (0.4 in.)
Accuracy < 5 m ±2.5 cm (1 in.) typical*
Accuracy ≥ 5 m ±10 cm (3.9 in.) typical
Mean ±1% of distance maximum
Ripple ±1% of distance maximum
Update rate (70%
Reective Target)
270 Hz typical
650 Hz fast mode**
>1000 Hz short range only
Repetition rate ~50 Hz default
500 Hz max
*Nonlinearity present below 1 m (39.4 in.)
**Reduced sensitivity
Interface
Specication Measurement
User interface I2C
PWM
External trigger
l2C interface Fast-mode (400 kbit/s)
Default 7-bit address 0x62
Internal register access & control
PWM interface External trigger input
PWM output proportional to distance at 10 μs/cm
Laser
Specication Measurement
Wavelength 905 nm (nominal)
Total laser power
(peak)
1.3 W
Mode of operation Pulsed (256 pulse max. pulse train)
Pulse width 0.5 μs (50% duty Cycle)
Pulse train repetition
frequency
10-20 KHz nominal
Energy per pulse <280 nJ
Beam diameter at
laser aperture
12 × 2 mm (0.47 × 0.08 in.)
Divergence 8 mRadian
Connections
Wiring Harness
Wire Color Function
Red 5 Vdc (+)
Orange Power enable (internal pull-up)
Yellow Mode control
Green I2C SCL
Blue I2C SDA
Black Ground (-)
There are two basic congurations for this device:
• —a serial computer bus used to I2C (Inter-Integrated Circuit)
communicate between this device and a microcontroller, such as an
Arduino board .(“I2C Interface”, page 4)
• —a bi-directional signal transfer method PWM (Pulse Width Modulation)
that triggers acquisitions and returns distance measurements using the
mode-control pin .(“Mode Control Pin”, page 4)
Connector
You can create your own wiring harness if needed for your project or
application. The needed components are readily available from many
suppliers.
Part Part NumberDescription Manufacturer
Connector
housing
6-position, rectangular housing,
latch-lock connector receptacle with
a 1.25 mm (0.049 in.) pitch.
JST GHR-06V-S
Connector
terminal
26-30 AWG crimp socket connector
terminal (up to 6)
JST SSHL-002T-P0.2
Wire UL 1061 26 AWG stranded copper N/A N/A
Connector Port Identication
➏
➊
Item Pin Function
➊1 5 Vdc (+)
2 Power enable (internal pull-up)
3 Mode control
4 I2C SCL
5 I2C SDA
➏6 Ground (-)

Produkt Specifikationer

Mærke: Garmin
Kategori: Ikke kategoriseret
Model: Lidar Lite v3

Har du brug for hjælp?

Hvis du har brug for hjælp til Garmin Lidar Lite v3 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Ikke kategoriseret Garmin Manualer

Garmin

Garmin Approach CT1 Manual

26 Februar 2025
Garmin

Garmin Spectra LC302 Manual

9 Januar 2025
Garmin

Garmin Spectra LC102 Manual

9 Januar 2025
Garmin

Garmin dēzl Headset 210 Manual

14 November 2024
Garmin

Garmin Inreach Messenger Plus Manual

11 November 2024
Garmin

Garmin GMM 170 Manual

4 Oktober 2024
Garmin

Garmin GMR 18 xHD Manual

4 Oktober 2024
Garmin

Garmin Edge Power Mount Manual

3 Oktober 2024
Garmin

Garmin GT30-TH Manual

3 Oktober 2024
Garmin

Garmin GMR 18 HD+ Manual

30 September 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

AmpliVox

AmpliVox Airvox SW695 Manual

15 Juni 2025
Stiga

Stiga SBC 635 KD Manual

15 Juni 2025
Cleveland

Cleveland 36CGM300 Manual

15 Juni 2025
Gourmia

Gourmia GTF7970 Manual

15 Juni 2025
Planet Audio

Planet Audio P9630B Manual

15 Juni 2025
ORNO

ORNO OR-DOM-YR-934UD Manual

15 Juni 2025
Lavex

Lavex 842CD12VST12 Manual

15 Juni 2025
Marshall

Marshall RCP-PLUS Manual

15 Juni 2025
Hughes & Kettner

Hughes & Kettner BassForce XL Manual

15 Juni 2025
Hughes & Kettner

Hughes & Kettner Red Box Mk III Manual

15 Juni 2025