GE Café CXLB3H3PMBT Manual

GE Køleskab Café CXLB3H3PMBT

Læs gratis den danske manual til GE Café CXLB3H3PMBT (3 sider) i kategorien Køleskab. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 8 anmeldelser. Har du et spørgsmål om GE Café CXLB3H3PMBT, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/3
31-2000163 Rev. 2 08-18
I. Removing the Handle
1. Locate the set screws on the handle caps (they are usually on the
less visible side).
2. Loosen the set screw on one end with the 1/8” Allen wrench while
supporting the handle. Do not remove the set screw from the
handle cap.
3. Keep supporting the handle while you loosen the set screw on the
other handle cap. Lift the handle from the fasteners on the door
II. Replacing a New Handle
1. Make sure the set screws are loosened. Place the handle over the
fasteners of the door (we recommend putting the screw side of the
handle toward the less visible side). Take care to support the
handle so it doesn’t fall and scratch the appliance finish. Make sure
both the handle caps are resting on the face of the door.
2. Lock one end of the handle into position by tightening the set
screw in the handle cap with the 1/8” Allen wrench. Be sure not to
over tighten.
3. Keep supporting the handle as you lock the other end of the
handle into position by tightening the set screw in the handle cap
with the 1/8” Allen wrench. Be sure not to over tighten.
Repeat these instructions on all other handles.
Instructions for Replacing Appliance Handles
Instrucciones En Español | Instructions En Français:
www.cafeappliances.com/kit-instructions
3/16” Allen Wrench
(not included)
1/8” Allen Wrench
(included with handle)
Tools You Will Need:
LOOSEN
fig. 1
fig. 2
Replacing Your Café Handles
fastener
handle cap
set screw
set screw
The handle on your appliance may have a dierent orientation than what is
shown, but the installation will be the same.
Be extra careful of the appliance finish around the handle area, as it can
scratch. During removal of the handle screws, hold onto the handle tightly
so it won’t fall and scratch the appliance. We recommend having another
person help you hold the handle in place as you remove the screws.
When the handle has been removed, check the fasteners that are
attached to the appliance front to see if they are loose. If so, tighten them
with a 3/16” Allen wrench before attaching the new handle.
Note: Fastener shape may vary by appliance.
For appliances with multiple handles, look at your current configuration
before removing the handles, and make sure the replacement handles
match that logo and set screw position.
IMPORTANT!

Produkt Specifikationer

Mærke: GE
Kategori: Køleskab
Model: Café CXLB3H3PMBT

Har du brug for hjælp?

Hvis du har brug for hjælp til GE Café CXLB3H3PMBT stil et spørgsmål nedenfor, og andre brugere vil svare dig


Køleskab GE Manualer

GE

GE GSS25WGTBB Manual

15 November 2025
GE

GE ESS22XGMWW Manual

15 November 2025
GE

GE GDE23ETEWW Manual

15 November 2025
GE

GE HPS16BTNRWW Manual

15 November 2025
GE

GE HME03GGMBB Manual

14 November 2025
GE

GE Profile PDS20MCPBB Manual

14 November 2025
GE

GE ZISB48DC Manual

13 November 2025
GE

GE ESHS6PGYSS Manual

13 November 2025
GE

GE Profile PDS22SBSLSS Manual

13 November 2025
GE

GE PNR20KSEFES Manual

13 November 2025

Køleskab Manualer

Nyeste Køleskab Manualer

Turbo Air

Turbo Air TBB-24-60SBD-N6 Manual

20 December 2025
Husky

Husky C1HHMBBKAU Manual

20 December 2025
Summit

Summit FF1093SS Manual

20 December 2025
Turbo Air

Turbo Air TBB-2SGD-N Manual

20 December 2025
Sharp

Sharp SJ-UD135T2W-EU Manual

19 December 2025
Gorenje

Gorenje NRKI517E41 Manual

19 December 2025
Turbo Air

Turbo Air TBB-24-48SBD-N6 Manual

19 December 2025
BEKO

BEKO B5RCNA365HDXB Manual

19 December 2025
BEKO

BEKO B5RCNA346HG Manual

19 December 2025
Turbo Air

Turbo Air TBB-2SBD-N6 Manual

19 December 2025