GE JX36BBB Manual

GE Mikrobølgeovn JX36BBB

Læs gratis den danske manual til GE JX36BBB (2 sider) i kategorien Mikrobølgeovn. Denne vejledning er vurderet som hjælpsom af 101 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 51 anmeldelser. Har du et spørgsmål om GE JX36BBB, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
Installation Filler Panel Kit
Instructions JX36
FOR 36” INSTALLATIONS
31-7000104 Rev. 1 11-20 GEA
TOOLS YOU WILL NEED
• Phillips screwdriver
PARTS INCLUDED
• Trim kit side mount (2)
• Connecting Bar (1)
• Installation screws (2)
Kit Model
JX36B CVM519
CVM721
CVM1750
CVM1790
CSA1201
CVM517
CVM521
JVM3160
JVM3162
JNM3163
JVM6172
JVM6175
DVM7195
JVM7195
JNM7196
PSA9120
PSA9240
PVM9005
PVM9179
PVM9215
PNM9216
QVM7167
RVM5160
2
Installation Instructions
Install the OTR bracket according to OTR
Installation Instructions.
NOTE: This kit is best installed with 12” base
cabinets. Cabinets with greater than a 12” base
may have a larger gap between back wall and
kit.
NOTE: Ensure the OTR and the Cooking
Product installation manuals are followed.
1. Place the microwave on a flat surface where
you can work on the bottom of both sides.
2. Remove all 3 pieces from the package (right
panel, left panel, top brace.
3. Remove the screws from the lower back
corner of the microwave.
4. Your microwave will have 1-3 screws on the
bottom left side. Remove these screws to
create a gap between the bottom plate and
the case of the microwave.
5. With the short edge of the side trim to the
back of the left side of the microwave, slide
the lower lip of the side panel inside the gap
between the bottom plate and the case.
6. Attach the side trim to the back of the
microwave using the screw removed in step 3,
then reattach the screws removed in step 4 to
the underside of the microwave.
7. Make adjustments so the side panel is in line
with the front of the microwave case.
8. Repeat the same procedure for the other side.
9. Using the 2 flat head screws provided, attach
the top brace to the 2 side panels to pull both
panels together.
Must use two forward holes for the top brace
10. Install the over-the-range microwave with side
panels into the 36” opening.
NOTE: Make sure you have installed the
mounting wall bracket in the center of the 36”
opening per the installation instructions provided
with your microwave.
OTR Bracket
Flush with front of
microwave case.
KIT INSTALLATION
Screw
Holes
Printed in the USA

Produkt Specifikationer

Mærke: GE
Kategori: Mikrobølgeovn
Model: JX36BBB

Har du brug for hjælp?

Hvis du har brug for hjælp til GE JX36BBB stil et spørgsmål nedenfor, og andre brugere vil svare dig


Mikrobølgeovn GE Manualer

GE

GE JVM6175SLVC Manual

28 Juli 2025
GE

GE JNM3161MFSA Manual

28 Juli 2025
GE

GE JES1460DSBB Manual

27 Juli 2025
GE

GE JVM7195DFWW Manual

27 Juli 2025
GE

GE JES2051DNWW Manual

27 Juli 2025
GE

GE PSA9240DFBB Profile Manual

27 Juli 2025
GE

GE JES1142SPSS Manual

27 Juli 2025
GE

GE JX827FMDS Manual

23 Juli 2025
GE

GE JX830BMTS Manual

23 Juli 2025
GE

GE JX830FMDS Manual

23 Juli 2025

Mikrobølgeovn Manualer

Nyeste Mikrobølgeovn Manualer

AEG

AEG BO4BEMGM Manual

30 Juli 2025
SVAN

SVAN SMW2701G Manual

30 Juli 2025
Panasonic

Panasonic NN-SD37QS Manual

30 Juli 2025
SVAN

SVAN SMW19700 Manual

30 Juli 2025
Sauber

Sauber SERIE 5-20W Manual

29 Juli 2025
Neff

Neff C24GR3XG1B Manual

28 Juli 2025
Brandt

Brandt BMS7120B Manual

28 Juli 2025
Neff

Neff NR4WR21N1 Manual

28 Juli 2025
Neff

Neff NL9GR31Y1 Manual

28 Juli 2025
Blaupunkt

Blaupunkt 5M60M8690GB Manual

28 Juli 2025