GE JX36BTS Manual

GE Mikrobølgeovn JX36BTS

Læs gratis den danske manual til GE JX36BTS (2 sider) i kategorien Mikrobølgeovn. Denne vejledning er vurderet som hjælpsom af 82 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 41.5 anmeldelser. Har du et spørgsmål om GE JX36BTS, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Installation Filler Panel Kit

Instructions JX36

FOR 36” INSTALLATIONS

31-7000104 Rev. 1 11-20 GEA

TOOLS YOU WILL NEED

• Phillips screwdriver

PARTS INCLUDED

• Trim kit side mount (2)

• Connecting Bar (1)

• Installation screws (2)

Kit Model

JX36B CVM519

CVM721

CVM1750

CVM1790

CSA1201

CVM517

CVM521

JVM3160

JVM3162

JNM3163

JVM6172

JVM6175

DVM7195

JVM7195

JNM7196

PSA9120

PSA9240

PVM9005

PVM9179

PVM9215

PNM9216

QVM7167

RVM5160

Installation Instructions

Install the OTR bracket according to OTR

Installation Instructions.

NOTE: This kit is best installed with 12” base

cabinets. Cabinets with greater than a 12” base

may have a larger gap between back wall and

kit.

NOTE: Ensure the OTR and the Cooking

Product installation manuals are followed.

1. Place the microwave on a flat surface where

you can work on the bottom of both sides.

2. Remove all 3 pieces from the package (right

panel, left panel, top brace.

3. Remove the screws from the lower back

corner of the microwave.

4. Your microwave will have 1-3 screws on the

bottom left side. Remove these screws to

create a gap between the bottom plate and

the case of the microwave.

5. With the short edge of the side trim to the

back of the left side of the microwave, slide

the lower lip of the side panel inside the gap

between the bottom plate and the case.

6. Attach the side trim to the back of the

microwave using the screw removed in step 3,

then reattach the screws removed in step 4 to

the underside of the microwave.

7. Make adjustments so the side panel is in line

with the front of the microwave case.

8. Repeat the same procedure for the other side.

9. Using the 2 flat head screws provided, attach

the top brace to the 2 side panels to pull both

panels together.

Must use two forward holes for the top brace

10. Install the over-the-range microwave with side

panels into the 36” opening.

NOTE: Make sure you have installed the

mounting wall bracket in the center of the 36”

opening per the installation instructions provided

with your microwave.

OTR Bracket

Flush with front of

microwave case.

KIT INSTALLATION

Screw

Holes

Printed in the USA

Produkt Specifikationer

Mærke:	GE
Kategori:	Mikrobølgeovn
Model:	JX36BTS

Har du brug for hjælp?

Hvis du har brug for hjælp til GE JX36BTS stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Mikrobølgeovn GE Manualer

GE PCST22U1WSS Manual

17 Januar 2025

GE PCWK22U1WWW Manual

17 Januar 2025

GE PCHK11S1WWW Manual

17 Januar 2025

GE PCHK11S1WBB Manual

17 Januar 2025

GE PCWK22U1WBB Manual

17 Januar 2025

GE PCWK22U1WDD Manual

17 Januar 2025

GE PCHK11S1WSS Manual

17 Januar 2025

GE GCSH22U1WSS Manual

17 Januar 2025

GE PCWK15C1WSS Manual

17 Januar 2025

GE Profile PWB7030SVSS Manual

28 Oktober 2024

Mikrobølgeovn Manualer

Nyeste Mikrobølgeovn Manualer

Imarflex MO-G20D Manual

14 Juni 2025

Solwave EM217G4V Manual

14 Juni 2025

Imarflex MO-Q20R Manual

14 Juni 2025

Solwave EMA17G4V Manual

14 Juni 2025

Solwave 180MW2100T Manual

13 Juni 2025

Solwave 180MWSWAHD18 Manual

13 Juni 2025

Solwave EM21G4V Manual

13 Juni 2025

Solwave 180MWASHD12 Manual

13 Juni 2025

Imarflex MO-G28D Manual

13 Juni 2025

Rival EM720CWA-PMB Manual

12 Juni 2025