Geba Tronic ROLLOTIMER Standard Manual

Geba Tronic Garage døråbner ROLLOTIMER Standard

Læs gratis den danske manual til Geba Tronic ROLLOTIMER Standard (2 sider) i kategorien Garage døråbner. Denne vejledning er vurderet som hjælpsom af 59 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 30 anmeldelser. Har du et spørgsmål om Geba Tronic ROLLOTIMER Standard, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Safety advice

Assembly, connection and maintenance of the device may only be executed by personnel trained

accordingly. Use for the installation of the Rollotimer a deep switch box. Please pay attention that no

cables are affecting the proper latching of the device. To prevent overvoltage and therewith a

malfunction, plug or unplug the operation panel only in de-energized state! For this purpose

disconnect the power supply of the electric circuit by switching off the corresponding fuse.

Technical Data Ref. No. 941.DCZ2.00

Power supply 230V / 50Hz

Switching voltage 250 V AC

Switching contact load 3 A (cos phi=1)

Ambient temperature +5°C to +45°C

Running time 2,5 minutes (max.)

Changeover delay min. 0,5 seconds

Accuracy < 5 seconds /day

Power reserve approx. 0,5 minutes

Protection class IP 20

Safety class II

Conformity CE

Installation and

operation manual

ROLLOTIMER Standard

Ref. No. 941.DCZ2.00

PE green/yellow

N blue

L black/brown

blue

brown or black

blue

brown or black

Connection diagram

N L N ZU AUF

N NL down up

X0469

Programming of ROLLOTIMER Standard

1. Enter programming mode Press ▲ (UP) and ▼ (DOWN) simultaneously

for approx. 3 seconds.

2. Time of day

programming

Setting of the hour

18 : 32

Use ▲ (UP) to set the hour.

Press ▼ (DOWN).

Setting of the minutes

3218 :

Use ▲ (UP) to set the minutes.

Press ▼ (DOWN).

3. Automatic

opening

programming

Setting of the hour

07 : 20

Use ▲ (UP) to set the hour.

Press ▼ (DOWN).

Setting of the minutes

2007 :

Use ▲ (UP) to set the minutes.

Press ▼ (DOWN).

4. Automatic

closing

programming

Setting of the hour

21 : 45

Use ▲ (UP) to set the hour.

Press ▼ (DOWN).

Setting of the minutes

4521 :

Use ▲ (UP) to set the minutes.

Press ▼ (DOWN).

5. Operation Mode

setting

Use ▲ (UP) to set one of the following modes:

man = manual operation

auto = set automatic opening and closing time

var = a random generator changes the set

automatic opening and closing time by +/- 15

minutes

6. Exit

programming

mode

Press ▼ (DOWN).

Note: setting of the values

The value which you want to set is selected by the DOWN button and is signaled by the flashing of

the value.The value itself is set with the UP button which is raised with every push.

The values are raised automatically by pressing permanently the button. If you have reached the

desired value, confirm it by pressing DOWN which will switch automatically to the next value for

programming.

The programming mode will be closed automatically, if there is no input for 30 seconds. All set values

until then are set and safed. Due to the premature closing of the programming mode, the operation

mode will be set to manual (man).

Operation of the Rollotimer

push ▼ (DOWN) < 1 second Jog mode or STOP, if motor is running already

push ▼ (DOWN) > 1 second DOWN command

push ▼ (DOWN) > 6 seconds DOWN command +

time saved for DOWN command

push ▲ (UP) < 1 second Jog mode or STOP, if motor is running already

push ▲ (UP) > 1 second UP command

push ▲ (UP) > 6 seconds UP command +

time saved for UP command

push▼ (DOWN) + ▲ (UP) < 1 second

simultaneously

Change of operation mode

push ▼ (DOWN) + ▲ (UP) > 1 second and < 3

seconds simultaneously

Activation of programming mode

push ▼ (DOWN) + ▲ (UP) > 6 seconds

simultaneously

General reset

(restore factory settings)

Jog mode

To adjust the angle of the venetian blinds push the UP or DOWN button (up to 1 second). The

automatic mode (auto) remains unchanged.

Quick programming

If the UP or DOWN button is pressed longer than 6 seconds, the blind is running in the direction and

the current time will be saved as the automatic UP or DOWN command time (memory function).

Operation modes

Manual mode man

Automatic mode (day programm) auto

Vacation mode: automatic + random generator var

You can enable the by pushing the UP and DOWN buttons simultaneously. Bymanual mode (man)

repeating this, it will be switched back to the original mode (auto or var)

The activation of the will open and close the blinds according to theautomatic mode (auto)

programmed times.

The activation of the will open and close the blinds according to thevacation mode (var)

programmed times with a randomly generated shift of +/- 15 minutes.

The blinds can be open and closed manually in any operation mode by pushing ▲ (UP)

or ▼ (DOWN).

Factory settings

Day programm UP 07:00h, DOWN 21:00h

Time 00:00h

Mode Man

Produkt Specifikationer

Mærke:	Geba Tronic
Kategori:	Garage døråbner
Model:	ROLLOTIMER Standard

Har du brug for hjælp?

Hvis du har brug for hjælp til Geba Tronic ROLLOTIMER Standard stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Garage døråbner Geba Tronic Manualer

Geba Tronic TCS - Cody - Light Manual

26 Januar 2023

Geba Tronic ROLLOTIMER Standard Manual

18 December 2022

Geba Tronic TCS - Cody 1- 1 Manual

7 December 2022

Geba Tronic DC2 ECO Manual

25 Oktober 2022

Geba Tronic DC 2 EN ECO Manual

22 Oktober 2022

Geba Tronic DC MiniMax 3 S Manual

21 Oktober 2022

Geba Tronic TCS - Cody 2 Manual

7 Oktober 2022

Garage døråbner Manualer

Nyeste Garage døråbner Manualer

Somfy Exavia Star Manual

1 Februar 2025

Chamberlain B4505TC Manual

14 November 2024

Schellenberg 60991 Manual

12 November 2024

Somfy Freevia 400 Manual

28 September 2024

Superrollo TA70 Manual

7 August 2024

LiftMaster 8500WMC-267 Manual

18 Maj 2024

Craftsman CMXZDCG498 Manual

25 Marts 2024

Chamberlain ML750-GB Manual

13 Marts 2024

Hormann ProMatic P Manual

14 Februar 2024

Chamberlain CIGCWC Manual

12 Januar 2024