Genelec 8000-416C Manual


Læs gratis den danske manual til Genelec 8000-416C (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Genelec 8000-416C, eller vil du spørge andre brugere om produktet?

Side 1/2
SHORT TRUSS MOUNT 8000-416B for GENELEC 6010, 8010, 8020, 8030, 8040, 8050
instruction manual
easy handling,
adjustable direction and angle
1. SETUP & DIMENSIONS
The GENELEC 8000-416B SHORT TRUSS MOUNT
is pre-installed and ready for set up.
- Check if all the components are
-there and ok, particularly bolted
-assemblies A, B and C.
2. MONITOR MOUNTING
Bolt together GENELEC Monitor
with the SHORT TRUSS MOUNT.
2.a
Use both allen head screws
M6 x 14 (AF 5 mm) with washers.
Torque 8 Nm (5,9 lb-ft)
instruction manual
3. TRUSS MOUNTING 4. SETTINGS
4.a
TILT ANGLE
- loosen wingnut/hexnut
- incline GENELEC monitor into desired angle
- retighten hexnut/wingnut
4.b
DIRECTION
- loosen both lens head screws
- turn GENELEC monitor into desired direction
- retighten lens head screws
- For indoor use only
- For use only by trained installers
- Inspect the condition of the parts and the bolted assemblies regularly
- Loading: GENELEC 6010, 8010, 8020, 8030 (vertical mounting)
- Loading: GENELEC 8040, 8050 (horizontal mounting)
- Choose a position and mounting method compliant with local building codes and regulations
5. SAFETY INSTRUCTIONS
SHORT TRUSS MOUNT 8000-416B for GENELEC 6010, 8010, 8020, 8030, 8040, 8050
easy handling,
adjustable direction and angle
GENELEC Oy
Olvitie 5, Fin-74100 Iisalmi, www.genelec.com
24493-000-55 Rev.04 03-80-881-00 8/14
Tighten SHORT TRUSS MOUNT
to adequate frame tube (ø 48-51 mm).
Use washer, hexnut M12 and finally the
wing nut to secure the assembly.
Torque 30 Nm (22 lb-ft)
Torque 16 Nm (11,8 lb-ft)


Produkt Specifikationer

Mærke: Genelec
Kategori: Ikke kategoriseret
Model: 8000-416C

Har du brug for hjælp?

Hvis du har brug for hjælp til Genelec 8000-416C stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Genelec Manualer

Genelec

Genelec 9401A Manual

20 Juli 2025
Genelec

Genelec 9301B Manual

11 December 2024
Genelec

Genelec 9320A Manual

30 August 2024
Genelec

Genelec RAM1-401 Manual

6 August 2024
Genelec

Genelec 8000-416C Manual

11 Januar 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer