
G4201TM
G.hn Master and Client
Quick start guide
For further information and purchase enquiries
please contact info@gigacopper.net
1. Introduction
With the G.hn modem G4201TM you can easily extend
your network via existing data and telephone cables.
The devices are also suitable for the distribution of fiber
optic connections from the ONT to the router via existing
telephone line.
The modem can use any type of cable - both twisted pair
and non-twisted pair - for data transmission and
achieves a speed of approx. 1500 Mbit/s (sum of both
transmission directions).
The devices are always connected in pairs - a master and
a client. The master determines how fast the data is
transferred towards the client and back
(download/upload).
In networks with several clients, a G.hn switch can be
used instead of several master modems (see
Installation). This enables the central administration of
all G.hn components.
2. Package content
G4201TM Master or G4201TM Client
DC-12V/1A Power adapter
RJ11/RJ11 telephone cable 1.5m, 4- wire (SISO and MIMO)
TAE-F/RJ11 plug, 4- pole (SISO and MIMO)
3. Technical data
Dimensions: 111.5 * 83 * 24.5 mm
Weight: 0,19 kg
Operating temperature: 0°C - 40°C
Power consumption: < 3 Watt
4. G.hn Specification
G.hn Wave2, 2-200 MHz
Connection type: SISO (1 wire pair, 2-200MHz) and
MIMO (2 wire pairs, 2-100MHz)
Total bandwidth – ca. 1500 Mbit/s
(Total Download and Upload)
Splitting of the bandwidth – variable, default:
70% Download (from master to client)
30% Upload (from client to master)
Maximum permissible attenuation of the cable
connection: 75dB
5. Interfaces
Panel and LED description
Recessed reset button (15 Sec.)
Displays power availability
Status of the G.hn connection
(Green - OK, Yellow - weak signal,
Off - no connection)
Ethernet Connection Status