Giga Copper G4202T Manual

Giga Copper Ikke kategoriseret G4202T

Læs gratis den danske manual til Giga Copper G4202T (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 3.7 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Giga Copper G4202T, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

G4202T

G.hn Master and Client

Quick start guide

For further informaon and purchase enquiries

please contact info@gigacopper.net

1. Introducon

With the G.hn modem G4202T you can easily extend

your network via exisng data and telephone cables.

The devices are also suitable for the distribuon of ber

opc connecons from the ONT to the router via exisng

telephone line.

The modem can use any type of cable - both twisted pair

and non-twisted pair - for data transmission and

achieves a speed of approx. 1500 Mbit/s (sum of both

transmission direcons).

The devices are always connected in pairs - a master and

a client. The master determines how fast the data is

transferred towards the client and back

(download/upload).

In networks with several clients, a G.hn switch can be

used instead of several master modems (see

Installaon). This enables the central administraon of

all G.hn components.

2. Package content

 G4202T Master or G420 Client 2T

 DC-12V/1A Power adapter

 RJ11/RJ11 telephone cable , 4- wire (SISO and MIMO) 1.5m

 TAE-F/RJ11 , 4- pole (SISO and MIMO) plug

3. Technical data

 Dimensions : 103 * 66 * 27 : mm

 Weight: 0,19 kg

 Operang temperature: 0°C - 40°C

 Power consumpon: < 3 Wa

4. G.hn Specicaon

 G.hn Wave2, 2-200 MHz

 Connecon type: SISO (1 wire pair, 2-200MHz) and

MIMO (2 wire pairs, 2- MHz) 100

 Total bandwidth ca. 1500 Mbit/s –

(Sum of Download and Upload)

 Spling of the bandwidth variable ex works –, :

70% Download (from master client) to

30% Upload (from client master) to

 Maximum permissible aenuaon of the cable

connecon: 75dB

5. Interfaces

Panel and LED descripon

Labelling

Descripon

12V DC

Power input

RST

Recessed reset buon (15 Sec .)

LINE

G.hn port

G1, G2

2x 1 Gigabit Ethernet Port

PHONE

Analog phone port (RJ45)

PWR LED

Displays power availability

LINE LED

Status of the G.hn connecon

(Green - OK, Yellow - weak signal,

O - no connecon)

G1/G2 LED

Ethernet Connecon Status

6. Installaon

Variant 1 Point- - : one master and client – „ to Point “

Variant 2 Connecon to the Switch G4224T or G4200- –8T/4T

7. Connecon type and wire assignment on device (RJ45 plug)

The G.hn connecon can be established either via one wire pair (connecon type SISO PHONE ) or = G.hn prole “ 200MHz”

via two wire pairs (connecon type MIMO PHONE ). The connecon type must be = G.hn prole “ 100MHz MIMO”

congured via web interface in both modems or via the G.hn switch.

The default seng PHONE is one wire pair connecon (“ 200MHz”).

Wire assignment SISO

Wire assignment MIMO

Produkt Specifikationer

Mærke:	Giga Copper
Kategori:	Ikke kategoriseret
Model:	G4202T

Har du brug for hjælp?

Hvis du har brug for hjælp til Giga Copper G4202T stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Giga Copper Manualer

Giga Copper G4201TM Manual

30 August 2024

Giga Copper G4202T Manual

30 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

IFM SU9030 Manual

13 September 2025

IFM O2U554 Manual

13 September 2025

Speco Technologies HTi70TM Manual

13 September 2025

QSC RMXa Manual

13 September 2025

Tineco Floor One S2 Series Manual

13 September 2025

Tineco Floor One S3 Breeze Manual

13 September 2025

Tineco Floor One S5 Steam Manual

13 September 2025

Osram VX500-CB Manual

13 September 2025

Zelmer ZTS7990 Manual

13 September 2025

Osram VX250-SP Manual

13 September 2025