
2
BRACKET SAFETY
Tools and Parts
Gather the required tools and parts before starting installation.
Tools Needed:
■ 1 Socket Wrench with 10mm Socket
■ 4mm Hex Wrench
■ Tape measure
Parts Supplied:
■ Bracket(1)
■ M6 hex ange nuts (4)
■ M6 round head square neck bolts (4)
Bracket Use Requirements
■ Intended for use on Gladiator
®
Flex Cabinet Systems'
cabinets (sold separately).
Install the 30" Tall Cabinet
ASSEMBLY INSTRUCTIONS
You can be killed or seriously injured if you don't immediately
You
can be killed or seriously injured if you don't
follow
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”
These words mean:
follow instructions.
instructions.
DANGER
WARNING
NOTE: Flex Brackets are sold individually and Gladiator
®
GearTrack
®
channels are sold separately.
1. Install the brackets to the tall cabinet.
■ Attach the top bracket (P1) to the tall cabinet's back top with
four M6 round head square neck bolts (F1) and four M6 ange
nuts (F2).
■ Attach the center and bottom brackets (P1) to the tall
cabinet's back respectively with two M6 round head square
neck bolts (F1) and two M6 ange nuts (F2).
Excessive Weight Hazard
Use two or more people to move and install cabinet.
Failure to do so can result in back or other injury.
P1
X 3
F5
X 8
F3
X
8
P1
F5
F3
Orientation of
the wall bracket
during assembly
Three brackets
required as
shown
Pt: Bracket (3) F1: M6 round head square neck bolts (8)
F2: M6 hex ange nuts (8)