Godox MS200 Manual

Godox Lys MS200

Læs gratis den danske manual til Godox MS200 (6 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 41 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 21 anmeldelser. Har du et spørgsmål om Godox MS200, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

705-MS0000-00 Made In China 说明手册

Instruction Manual

中英文双语

Chinese English Bilingual

地址/ 深圳市宝安区福海街道塘尾社区耀川工业区厂房栋层至层、栋层至层Add: 2 1 4 4 1 4

1st to 4th Floor, Building 2/ 1st to 4th Floor, Building 4, Yaochuan Industrial Zone,

Tangwei Community, Fuhai Street, Bao’an District, Shenzhen 518103, China

电话/Tel: +86-755-29609320(8062) Fax: +86-755-25723423 传真/

邮箱/ E-mail: godox@godox.com http://www.godox.com

深圳市神牛摄影器材有限公司

GODOX Photo Equipment Co., Ltd.

MS Series Compact Studio Flash

系列影室闪光灯

FOREWORD

Thanks for choosing MS series studio flash. It is a lightweight, compact and

durable flash with complete functions. Design for shooting studio portrait and

e-commerce product. This product is suitable for head shot, waist shoot, and

certificate photography, as well as product shooting, etc. It can also offer high

light, background light, or hair light in large studios and workshops. The MS

flash offers:

CONTENTS

14 • Slave Trigger Model

15 • Buzz Function

15 • Key Combination

15 • Alarm Display

15 • Memory Function

15 • Over-Temperature

Protection Function

15 • Wireless Control Function

17 • Tube Replacement

17 Technical Data

18 Maintenance

Use optional X1, XT16 or FT-16 trigger to control the flash power ratio, modeling

lamp and buzzer, as well as flash triggering

Built-in Godox 2.4G wireless X system

Precise output displayed on LCD panel, 50 steps from 1/32 to 1/1 (or 5.0 to 10.0)

Anti-preflash function enables synchronization with cameras that have a one-

preflash firing system

Outstanding output stability, no more than 2% shifts when under the same output

150W modeling lamp adjusts in 5% to 100% power levels

Compact and lightweight body with Bowens mount to add almost any studio light

shapers

Auto memory and recovery of adjusted panel settings

09 Foreword

10 Warning

Names of Parts11

11 • Body

12 • LCD Panel

12 • Accessories

12 • Separately Sold Accessories

13 Operations

13 • Flash Preparation

13 • Power Connection

13 • Modeling Lamp

14 • Power Output Control

14 • Test Button

14 • Sync Triggering

14 • GR/CH Button

To prevent damage to the product or injury to you or to others, read the

following warnings in their entirety before using this product. Keep these

safety instructions where users can read them for ready reference.

Avoid sudden impacts as this can damage the flash tube and/or modeling lamp.

The apparatus shall not be exposed to tripping or splashing and that no objects

filled with liquids, such as vases, shall be placed on the apparatus.

The MAINS plug or an appliance coupler is used as the disconnect device, the

disconnect device shall remain readily operable.

An apparatus with CLASS I construction shall be connected to a MAINS socket

outlet with a protective earthing connection.

After 30 continuous flashes at full power, the flash should be cooled down for

about 3 minutes. Overheating will occur if it is used continuously without cooling

down.

Do not keep using the modeling lamp for a long time; otherwise flammable

accessories attaching to flash head, e.g. softbox will get burnt. A 10-minute time

is recommended in this case. After 10 minutes, cool it down for 1 minute.

When using a snoot, do not keep the modeling lamp on for a long time or fire too

frequently (not over six times for one minute). Overheating will result in damages

for strobe housing and/or studio light.

Do not disassemble or modify. Should the product break down, send the

defective back to the authorized service center for inspection and maintenance.

Keep dry. Do not handle with wet hands, immerse in water, or expose to rain.

Keep out of reach of children.

Please put the device in a ventilation environment and keep the parts of lighting

and heat dissipation holes are unobstructed. Do not use in flammable

environment.

As this product adopts make and break device, please keep it easy to be used.

No touching the heating parts of this product.

Please turn off the power and wear insulated gloves before installing and

connecting accessories. When replacing the tube or modeling lamp, please

make sure that the tube is cool and wear insulated gloves to prevent burns.

Do not flash directly towards naked eyes (especially those of babies), otherwise

it may lead to visual impairment.

Disconnect from the power supply when it will not be used for an extended

period.

For continued protection against risk of fire replace only with same Type F8AL

250V fuse.

Warning

- 09 - - 10 -

Produkt Specifikationer

Mærke:	Godox
Kategori:	Lys
Model:	MS200

Har du brug for hjælp?

Hvis du har brug for hjælp til Godox MS200 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys Godox Manualer

1 August 2025

1 August 2025

1 August 2025

1 August 2025

1 August 2025

1 August 2025

Godox ML60II Bi Manual

31 Juli 2025

Godox Knowled F600Bi Manual

31 Juli 2025

Godox MF-R76 S Manual

31 Juli 2025

Godox SL300R Manual

31 Juli 2025

Lys Manualer

Nyeste Lys Manualer

Honeywell HW-T12312 Manual

13 August 2025

V-TAC VT-10176 Manual

13 August 2025

Eurolite LED IP TMH-H420 Manual

13 August 2025

Eurolite LED Silent Par 6 QCL Floor Manual

13 August 2025

Neewer FS600C Manual

13 August 2025

Eurolite LED IP PAR 12x8W QCL Manual

13 August 2025

Philips Ultinon Essential LED 11258UE2X2 Manual

13 August 2025

Plus More MO-HF024 Manual

13 August 2025

Philips Ultinon Essential LED 11362UE2X2 Manual

12 August 2025

Philips Ultinon Essential LED 11005UE2X2 Manual

12 August 2025