Golden Lighting Chatham 1048-9 GMT Manual

Golden Lighting Lys Chatham 1048-9 GMT

Læs gratis den danske manual til Golden Lighting Chatham 1048-9 GMT (1 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Golden Lighting Chatham 1048-9 GMT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

Assembly Instructions: (Chatham)1048-6 and 1048-9

IMPORTANT:

• ALL INSTALLATION WORK SHOULD BE DONE BY ACCREDITED PROFESSIONAL.

• SHUT OFF POWER SUPPLY AT FUSE OR CIRCUIT BREAKER!

• USE ONLY THE SPECIFIED BULBS. DO NOT EXCEED THE MAXIMUM WATTAGE!

PREPARING FOR INSTALLATION

Remove all of the contents from the carton. See the important notes

above. Shut off the power at the circuit breaker and completely remove

theoldxturefromtheceiling,includingtheoldmountingstrap.

1. From the parts bag remove the mounting strap assembly. One end

ofnipple(F)shouldbeattachedtomountingstrap(A)withwasherand

hexnut(CandD)inplace.Theotherendshouldhavecanopyloop(H)

attached.Attachmountingstrap(A)tothejunctionboxusingmounting

screws(B)andascrewdriver.Tightensecurely.

2. Unscrew canopy loop collar (I) from canopy loop (H). Pass canopy (G)

overthemountedcanopylooptotesttheheight.Approximatelyhalfof

thecanopyloop’sexteriorthreadsshouldbeexposed,andthecanopy

loopcollarshouldtsnuglyontothecanopyloop.Removecanopy(G)

andadjusttheheightofnipple(F)andcanopyloop(H)untilthedesired

heightisreached.

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

xture with a clean lint-free cotton or microber cloth. Never spray cleaner directly onto the xture.

For Customer Service, please

contact the place of purchase.

ASSEMBLING THE FIXTURE

3. Review the diagram. Decide whether you would like the sockets to

faceupordownandpositionthelampbodyaccordingly.Connectropes

(P) to anchors (O).

4. By measuring, determine the correct number of chain links needed

forproperhangingheight.Ifnecessary,useapairofplierstoopenand

removeanyexcess chain. Attachchain connectors (K)to each endof

chain(J)beforeattachingone endofthechainconnector/chaintothe

top of hook (L). Close the chain connector. Connect the other chain

connector (K) to canopy loop (H).

5.Connecthook(L)toloop(M).Feedthexture’swiresupoverhook(L)

andthen throughchain(J) (every threelinksor so).Slide canopy loop

collar(I)andcanopy(G)ontothechain/wire.

CONNECTING THE WIRES

6.Haveanassistantsupporttheweightofthexturewhile completing

the wiring. Cut away excess wire. Thread the xture’s wires through

canopyloop (H)and nipple (F).Attach thexture’swiresto the power

supplywiresfromthejunctionbox.Connectblacktoblack(orsmooth);

whitetowhite(orribbed);groundtoground(greenorcopper).Twistthe

endsofthewirepairstogether,andthentwistonawireconnector.Make

surealltwistsareinthesamedirection.Ifthereisnogroundwire(green

or copper) coming from the junction box, locate ground screw (E) on

mountingstrap(A)andwrapthexture’sgroundwirearoundthegreen

groundscrew(E).Useascrewdrivertosecuregroundscrew(E)ontothe

mountingbracket.Tuckallwiresneatlyintothejunctionbox.

FINISHING THE INSTALLATION

7.Pushcanopy(G)uptotheceilingandslidecanopyloopcollar(I)up

beneath the canopy. Tightly threadcanopy loop collar (I) onto canopy

loop (H) to secure canopy (G) in place.

Install light bulbs (not provided) in accordance with the xture’s

specications.Donotexceedthemaximumrecommendedwattage.

Yourinstallationisnowcomplete.Turnonthepowerandtestthexture.

House Wires

Fixture Wires

Hot

How to Identify the Fixture’s Wires

Hot Neutral Ground

Smooth

Ribbed

Bare Metal,

Green, or

Green Inner

Thread

Black

White

Black Inner

Thread

White Inner

Thread

PLEASE NOTE:

Thisxturemaybemountedwiththe socketsfacingupor

down.

Please decide whether you would like the sockets to face up or

downandfollowthecorrespondinginstructions.

Lights Down

Lights Up

Produkt Specifikationer

Mærke:	Golden Lighting
Kategori:	Lys
Model:	Chatham 1048-9 GMT

Har du brug for hjælp?

Hvis du har brug for hjælp til Golden Lighting Chatham 1048-9 GMT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys Golden Lighting Manualer

Golden Lighting Bijoux 1998-5SF Manual

14 November 2025

Golden Lighting Monroe 7041-SF Manual

14 November 2025

Golden Lighting Waverly 3500-1W AB Manual

14 November 2025

Golden Lighting Aenon 3164-3P Manual

13 November 2025

Golden Lighting Monroe 7041-9 Manual

10 November 2025

Golden Lighting Aenon 3164-LP Manual

9 November 2025

Golden Lighting Adeline 1088-SF Manual

9 November 2025

Golden Lighting Cassio 2086-4SF Manual

9 November 2025

Golden Lighting Dixon 3219-SF Manual

8 November 2025

Golden Lighting Ellie 6808-6SF Manual

8 November 2025

Lys Manualer

Nyeste Lys Manualer

NightStick TWM-852XL Manual

17 December 2025

17 December 2025

17 December 2025

17 December 2025

17 December 2025

17 December 2025

17 December 2025

17 December 2025

17 December 2025

Vaxcel VL55602 Manual

16 December 2025