Gorenje BVX120WT Manual

Gorenje Ikke kategoriseret BVX120WT

Læs gratis den danske manual til Gorenje BVX120WT (59 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Gorenje BVX120WT, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/59

Operation Guide 3220

E-9

Countdown Timer Mode Stopwatch Mode

Alarm Mode

▲

World Time Mode

▲

E-8

General Guide

x Press & to change from mode to mode.

x In any mode (except when a setting screen is on the display), press

% to illuminate

the display.

Timekeeping Mode

Press &.

▲

E-7

To turn the Hourly Time Signal on and off .......................................................... E-39

To measure times with the stopwatch ................................................................ E-41

To configure the countdown timer ...................................................................... E-43

To use the countdown timer ................................................................................ E-44

To illuminate the display manually ...................................................................... E-45

To specify the illumination duration ................................................................... E-46

To turn the auto light switch on and off .............................................................. E-48

To set the time and date manually ...................................................................... E-58

To change the Daylight Saving Time (summer time) setting ............................ E-62

To turn the button operation tone on and off ..................................................... E-65

To recover from the sleep state ........................................................................... E-67

To turn Power Saving on and off ......................................................................... E-67

E-6

Procedure Lookup

The following is a handy reference list of all the operational procedures contained in

this manual.

To specify your Home City ................................................................................... E-11

To perform manual receive .................................................................................. E-25

To turn auto receive on and off ........................................................................... E-27

To check the latest signal reception results ...................................................... E-28

To view the time in another city ........................................................................... E-33

To toggle a city code time between Standard Time and

Daylight Saving Time ...................................................................................... E-34

To set an alarm time ............................................................................................. E-36

To test the alarm ................................................................................................... E-37

To turn an alarm on and off .................................................................................. E-38

E-5

Contents

General Guide .......................................................................................................... E-8

Radio-controlled Atomic Timekeeping ................................................................ E-10

World Time ............................................................................................................. E-32

Alarms .................................................................................................................... E-35

Stopwatch .............................................................................................................. E-40

Countdown Timer .................................................................................................. E-42

Illumination ............................................................................................................E-45

Power Supply ......................................................................................................... E-49

Timekeeping ........................................................................................................... E-57

Reference ............................................................................................................... E-64

Speciﬁ cations ........................................................................................................ E-74

Operating Precautions .......................................................................................... E-77

User Maintenance .................................................................................................. E-87

E-4

About This Manual

x Depending on the model of your watch, display text appears either as dark ﬁ gures

on a light background or light ﬁ gures on a dark background. All sample displays in

this manual are shown using dark ﬁ gures on a light background.

x Button operations are indicated using the letters shown in the illustration.

x Each section of this manual provides you with the information you need to perform

operations in each mode. Further details and technical information can be found in

the “Reference” section.

x To ensure that this watch provides you with the years of service for which it is

designed, be sure to carefully read and follow the instructions under “Operating

Precautions” and “User Maintenance.”

E-3

x The actual level at which some functions are disabled depends on the watch model.

x Frequent display illumination can run down the battery quickly and require charging.

The following guidelines give an idea of the charging time required to recover from a

single illumination operation.

Approximately 5 minutes exposure to bright sunlight coming in through a window

Approximately 8 hours exposure to indoor ﬂ uorescent lighting

x

Be sure to read “Power Supply” (page E-49) for important information you

need to know when exposing the watch to bright light.

If the display of the watch is blank...

If the display of the watch is blank, it means that the watch’s Power Saving function

has turned off the display to conserve power.

x See “Power Saving Function” (page E-66) for more information.

Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage

or loss suffered by you or any third party arising through the use of your watch or

its malfunction.

E-2

All

functions

enabled

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

Charge

Rechargeable battery

Bright Light

Electrical

energy

Solar cell

(Converts light to

electrical power.)

LEVEL 1

LEVEL 2

LEVEL 3

LEVEL 4

Some or all

functions

disabled

Dis-

charge

Battery charges in the light. Battery discharges in the dark.

• The watch continues to operate, even when it is not exposed to light. Leaving the

watch in the dark can cause the battery to run down, which will result in some watch

functions to be disabled. If the battery goes dead, you will have to re-configure watch

settings after recharging. To ensure normal watch operation, be sure to keep it

exposed to light as much as possible.

E-1

Getting Acquainted

Congratulations upon your selection of this CASIO watch. To get the most out of your

purchase, be sure to read this manual carefully.

• Be sure to keep all user documentation handy for future reference.

Keep the watch exposed to bright light

The electricity generated by the solar cell of the watch is

stored by a rechargeable battery. Leaving or using the

watch where it is not exposed to light causes the battery

to run down. Make sure the watch is exposed to light as

much as possible.

• When you are not wearing the watch on your wrist,

position the face so it is pointed at a source of bright

light.

• You should try to keep the watch outside of your sleeve

as much as possible. Charging is reduced significantly if

the face is covered only partially.

Bright Light

Solar cell

Operation Guide 3220

E-19

• Signal reception may not be possible at the distances noted below during certain

times of the year or day. Radio interference also may cause problems with reception.

Mainflingen (Germany) or Anthorn (England) transmitters: 500 kilometers

(310 miles)

Fort Collins (United States) transmitter: 600 miles (1,000 kilometers)

Fukushima or Fukuoka/Saga (Japan) transmitters: 500 kilometers (310 miles)

Shangqiu (China) transmitter: 1,500 kilometers (910 miles)

• Even when the watch is within the reception range of the transmitter, signal

reception will be impossible if the signal is blocked by mountains or other geological

formations between the watch and signal source.

• Signal reception is affected by weather, atmospheric conditions, and seasonal

changes.

• See the information under “Signal Reception Troubleshooting” (page E-29) if you

experience problems with time calibration signal reception.

E-18

Signals are receivable in the Taiwan area when reception conditions are good.

Shangqiu

1,000 kilometers

Fukuoka/Saga

500 kilometers

Fukushima

500 kilometers

Changchun

Beijing

1,500 kilometers

Shanghai

Chengdu

Japan Signals

China Signal

Hong Kong

E-17

Approximate Reception Ranges

U.K. and German Signals

Anthorn

Mainflingen

1,500 kilometers

500 kilometers

The Anthorn signal

is receivable within

this area.

U.S. Signal

Fort Collins

2,000 miles

(3,000 kilometers)

600 miles

(1,000 kilometers)

E-16

• The time calibration signal the watch will attempt to pick up depends on its current

Home City code setting as shown below.

Home City Code

LIS, LON, MAD, PAR, ROM,

BER, STO, ATH, MOW*

HKG, BJS

TPE, SEL, TYO

HNL*, ANC*, YVR, LAX, YEA,

DEN, MEX, CHI, NYC, YHZ, YYT

Frequency

60.0 kHz

77.5 kHz

68.5 kHz

40.0 kHz

60.0 kHz

Transmitter

Anthorn (England)

Mainflingen (Germany)

Shangqiu City (China)

Fukushima (Japan)

Fukuoka/Saga (Japan)

Fort Collins, Colorado

(the United States)

* The areas covered by the , and HNL, ANC MOW city codes are quite far from the

time calibration signal transmitters, and so certain conditions may cause problems

with signal reception.

• Calibration signal reception is disabled while a countdown timer operation is in

progress.

E-15

x Proper signal reception can be difﬁ cult or even impossible under the conditions listed

below.

Inside or

among

buildings

Inside a

vehicle

Near

household

appliances,

ofﬁ ce

equipment,

or a mobile

phone

Near a

construction

site, airport,

or other

sources of

electrical

noise

x Signal reception normally is better at night than during the day.

x Time calibration signal reception takes from two to seven minutes, but in some

cases it can take as long as 14 minutes. Take care that you do not perform any

button operations or move the watch during this time.

Among or

behind

mountains

Near high-

tension power

lines

E-14

Important!

• When getting ready to receive the time calibration signal, position the watch as

shown in the nearby illustration, with its 12 o’clock side pointing towards a window.

This watch is designed to receive a time calibration signal late at night. Because of

this, you should place the watch near a window as shown in the illustration when you

take it off at night. Make sure there are no metal objects nearby.

12 o’clock

• Make sure the watch is facing the right way.

E-13

• You can disable time signal reception, if you want. See “To turn auto receive on and

off” on page E-27 for more information.

• Under factory default settings, auto receive is turned off for all of the following city

codes: MOW (Moscow), HNL (Honolulu), and ANC (Anchorage). For details about

turning on auto receive for these city codes, see “To turn auto receive on and off” on

page E-27.

Time Calibration Signal Reception

There are two different methods you can use to receive the time calibration signal:

auto receive and manual receive.

• Auto Receive

With auto receive, the watch receives the time calibration signal automatically up to

6 times a day (5 times a day for the Chinese calibration signal). When any auto

receive is successful, the remaining auto receive operations are not performed. For

more information, see “About Auto Receive” (page E-20).

• Manual Receive

Manual receive lets you start a time calibration receive operation with the press of a

button. For more information, see “To perform manual receive” (page E-25).

E-12

YVR LAX, : Vancouver, Los Angeles

YEA DEN, : Edmonton, Denver

MEX CHI, : Mexico City, Chicago

NYC : New York

YHZ : Halifax

YYT : St.Johns

3. Press A to exit the setting screen.

• Normally, your watch should show the correct time as soon as you select your Home

City code. If it does not, it should adjust automatically after the next auto receive

operation (in the middle of the night). You also can perform manual receive (page

E-25) or you can set the time manually (page E-58).

• The watch will receive the time calibration signal automatically from the applicable

transmitter (in the middle of the night) and update its settings accordingly. For

information about the relationship between city codes and transmitters, see page

E-16 and “Transmitters” (page E-69).

• See the maps under “Approximate Reception Ranges” (page E-17) for information

about the reception ranges of the watch.

E-11

• The U.S. time calibration signal can be picked up by the watch while in North

America. The term “North America” in this manual refers to the area that consists of

Canada, the continental United States, and Mexico.

To specify your Home City

1. In the Timekeeping Mode, hold down A until the city

code starts to flash, which indicates the setting screen.

2. Press D B (east) and (west) to select the city code

you want to use as your Home City.

LIS, LON : Lisbon, London

MAD BER,PAR,ROM, , STO : Madrid, Paris,

Rome, Berlin, Stockholm

ATH : Athens

MOW : Moscow

HKG BJS TPE, , : Hong Kong, Beijing, Taipei

SEL TYO, : Seoul, Tokyo

HNL : Honolulu

ANC : Anchorage

City code

PM indicator

Seconds

Hour : Minutes

E-10

Radio-controlled Atomic Timekeeping

This watch receives a time calibration signal and updates its time setting accordingly.

• This watch is designed to pick up the time calibration signals transmitted in Germany

(Mainflingen), England (Anthorn), the United States (Fort Collins), China (Shangqiu),

and Japan (Fukushima, Fukuoka/Saga).

Current Time Setting

This watch adjusts its time setting automatically in accordance with a time calibration

signal. You also can perform a manual procedure to set the time and date, when

necessary.

• The first thing you should do after purchasing this watch is to specify your

Home City (the city where you normally will use the watch). For more

information, see “To specify your Home City” (page E-11).

• When using the watch outside the areas covered by the time signal transmitters, you

will have to adjust the current time setting manually as required. See “Timekeeping”

(page E-57) for more information about manual time settings.

Produkt Specifikationer

Mærke:	Gorenje
Kategori:	Ikke kategoriseret
Model:	BVX120WT

Har du brug for hjælp?

Hvis du har brug for hjælp til Gorenje BVX120WT stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Gorenje Manualer

Gorenje HKS6D71XMPA Manual

9 Januar 2025

Gorenje HKS6D71BMPA Manual

9 Januar 2025

Gorenje HKS5C71XF Manual

9 Januar 2025

Gorenje HKS5D71BMPF Manual

9 Januar 2025

Gorenje HKS5D71XMPF Manual

9 Januar 2025

Gorenje HKS5C71BF Manual

9 Januar 2025

Gorenje T850DPB Manual

4 Januar 2025

Gorenje T800DB Manual

4 Januar 2025

Gorenje K6121WG Manual

10 December 2024

Gorenje EC6INB Manual

10 December 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Yamazen RS-14734CJH Manual

11 Juli 2025

Prima Prostate Test-PSA Manual

11 Juli 2025

Yamazen NUMF-E306 Manual

11 Juli 2025

Philips Sonicare 5500 Series HX7111 Manual

11 Juli 2025

Microchip USB5926C Manual

11 Juli 2025

Yamazen MNR-12874CJ Manual

11 Juli 2025

Yamazen YWC-193SFK Manual

11 Juli 2025

Blustream AD11AU Manual

11 Juli 2025

RGBlink Q16pro Manual

11 Juli 2025

Yamazen CV-1825 Manual

11 Juli 2025