Gossen Metrawatt POINTAX 6000M Manual

Gossen Metrawatt Måleudstyr POINTAX 6000M

Læs gratis den danske manual til Gossen Metrawatt POINTAX 6000M (16 sider) i kategorien Måleudstyr. Denne vejledning er vurderet som hjælpsom af 40 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 20.5 anmeldelser. Har du et spørgsmål om Gossen Metrawatt POINTAX 6000M, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/16

Operating Instructions

POINTAX 6000M

Point Recorder 3-348-819-03

2/8.18

Contents

Page

Application and brief description

The POINTAX 6000M is a microprocessor-controlled point

recorder. It is supplied in two different versions:

– scale version with 1 to 6 scale divisions,

– display version (no more available)

The recorder is connected to transducers and/or directly to ther-

mocouples or resistance thermometers. The measuring channels

are electrically isolated and earth-free. The recorder is matched to

the measuring task via the software by means of

– keys of the display and operating panel

– PC and parameterizing program PARATOOL P6000M

via the RS 485 interface.

Standard temperature sensor curves are stored in the firmware of

the recorder and linearized with high accuracy. Supplementary

functions like text print, balancing function and event marker

increase the information content of the print-out process quantity.

Alarm signalling and remote control make the recorder a device to

be used in a wide range of applications. The standby function

makes triggered recording operation possible.

Reference symbols in the text

<Key> Designation of the keys in the display and control

panel

{ }Display Non-flashing presentation on the display

{ }Display Flashing presentation on the display

The information "right", "left" or "top", "bottom" – unless other-

wise stated – is on the understanding that the viewer looks at the

front.

Supplementary documents

Parameterizing instructions POINTAX 6000M (Scale version)

Interface description POINTAX 6000M

(can be downloaded from our website)

Important information for your safety!

It must absolutely be read and followed!

A condition of correct and safe operation of the point

recorder POINTAX 6000M is that it is transported and stored

in a suitable manner, competently installed and started as

well as operated correctly and serviced carefully.

Only those persons must work on the recorder who are famil-

iar with installation, startup, operation and servicing of com-

parable equipment and who have the qualification required

for their work.

The contents of these operating instructions and the safety

notes affixed to the unit are to be observed.

The regulations, standards and directives mentioned in these

operating instructions are for the Federal Republic of Ger-

many. When using the recorder in other countries, relevant

national rules must be followed.

The recorder is constructed and tested in accordance with

DIN EN 61010-1 "Safety requirements for electronic measur-

ing, open-loop control, closed-loop control and laboratory

instruments“, it left the factory in safe and proper condition.

To maintain this condition and to ensure safe operation, the

safety notes in these operating instructions with the heading

"Caution" must be followed. Otherwise, persons could be

endangered and the unit itself as well as other equipment and

facilities could be damaged.

If the information contained in these operating instructions

should not be sufficient in certain cases, our product support

(see page 15) will be glad to provide further information.

2 GMC-I Messtechnik GmbH

1 Installation and startup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.1 Scope of delivery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2 Mounting site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4 Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.5 Placing the recording chart . . . . . . . . . . . . . . . . . . . . . . 5

1.6 Placing the color head . . . . . . . . . . . . . . . . . . . . . . . . . . 6

1.7 Switching the recorder on . . . . . . . . . . . . . . . . . . . . . . . 6

1.8 Positioning the recording chart . . . . . . . . . . . . . . . . . . . 6

2 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.1 Removing the recording chart . . . . . . . . . . . . . . . . . . . . 7

2.2 Removing the recording chart from the

take-up reel . . . . . . . . . . . . . . . . . . . . . . . (see Figure 12) 7

2.3 Changing the chart speed . . . . . . . . . . . . . . . . . . . . . . . 7

2.4 Standby function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.5 Measured value display . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.6 Balancing function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.7 End-of-chart signalling . . . . . . . . . . . . . . . . . . . . . . . . . . 8

3 Parameterizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4 Reconfiguration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.1 Firmware update . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.2 Replacing scales . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

4.3 Replacing the label for measuring points

(see Figure 16 and Figure 17). . . . . . . . . . . . . . . . . . . . . 10

4.4 Replacing the case doors . . . . . . . . . . . . . . . . . . . . . . 10

5 Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

5.1 Fuse replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6 Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

7 Packing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

8 Returns and Environmentally Sound Disposal . . . . . . . . . . . 15

9 Repair and Replacement Parts Service

Calibration Center* and

Rental Instrument Service. . . . . . . . . . . . . . . . . . . . . . . . . . 15

10 Product Support. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Produkt Specifikationer

Mærke:	Gossen Metrawatt
Kategori:	Måleudstyr
Model:	POINTAX 6000M

Har du brug for hjælp?

Hvis du har brug for hjælp til Gossen Metrawatt POINTAX 6000M stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Måleudstyr Gossen Metrawatt Manualer

Gossen Metrawatt SECULIFE ST M693A Manual

6 September 2024

Gossen Metrawatt METRALINE EARTH M590R Manual

4 September 2024

Gossen Metrawatt METRA Hit 27Ex Manual

3 September 2024

Gossen Metrawatt METRAOHM 10 Manual

2 September 2024

Gossen Metrawatt POINTAX 6000M Manual

2 September 2024

Gossen Metrawatt METRAHIT CAL Manual

1 September 2024

Gossen Metrawatt PROFITEST PV Manual

1 September 2024

Gossen Metrawatt METRAPhase 1 Manual

1 September 2024

Gossen Metrawatt SECUTEST 21F Manual

1 September 2024

Gossen Metrawatt SECULOAD-N Manual

1 September 2024

Måleudstyr Manualer

Nyeste Måleudstyr Manualer

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025

3 April 2025