GPX PJS909 Manual

GPX Beamer PJS909

Læs gratis den danske manual til GPX PJS909 (2 sider) i kategorien Beamer. Denne vejledning er vurderet som hjælpsom af 22 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 11.5 anmeldelser. Har du et spørgsmål om GPX PJS909, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

INDOOR/OUTDOOR

PROJECTOR SCREEN

User’s Guide for Model PJS909-01

For the most up-to-date version of this User’s Guide, go to www.gpx.com

Please read through this user guide before utilizing the screen.

Correct usage and maintenance will ensure a long product life.

Care & User Instructions

• Please be sure to distinguish between the front and back of the screen fabric when setting up the

projection screen. CineWhiteTM (front projection) has a black backing and Wraith Veil (rear projection)

is labeled front, back.

• Dust, dirt and scratches on the projection surface will affect the picture quality, please take note of the

points below to prevent that from occurring:

1. Do not touch the projection surface with your hands

2. Do not write or draw on the projection surface

3. Do not use fingers or sharp objects to point on the projection surface; this will damage the screen

material.

4. Use a soft-damp cloth to clean the projection surface; do not use chemical cleaning agents or alcohol.

5. Use clean water when dampening the cleaning cloth and do not rub against the material to clean it.

• After using the screen, disassemble it and store it in the carrying bag provided.

• To avoid damage and injury, the screen should only be operated by adults.

Product Description

Design: The aluminum frame is designed to be light weight and easily operated making it easy to carry,

assemble and disassemble.

Screen Fabric: The screen fabric is attached to the rectangular frame and held in place by several press

studs, which ensure and evenly stretched and flat surface. The CineWhiteTM

(front projection) and

WraithVeil (rear projection) screen materials are durable and can be folded many times without causing

damage or distortion to the surface.

1 2

A. Folding frame x 1

D. Projection screen material x 1

G. Rope x 2

B. Left and right folding legs x 2

E. Knob screw x 2

H. Carrying Bag x 1

C. Screen material bag x 1

F. Eye bolt x 2

I. Stake x 4

Parts Diagram

Note: The parts list above is subject to change without notice.

Correct usage of the projection screen will ensure better viewing results.

For front projection, assemble and view the screen as indicated in Fig. 1

For rear projection, assemble and view the screen as indicated in Fig. 2

Frame Assembly and Screen Material Attachment

1. Take the folding frame (A) carrying bag (H) out of the and place it on a flat surface. Unfold the longer

sections first as shown in Fig. 3-4.

2. Unfold the frame until the latch on the hinge “ clicks” into place. Repeat the procedure for the shorter

sections. (Fig. 5-6)

8. To secure the frame, place a into each hole locatedstake (I)

on the frame footing, and hammer it into the ground. Finally,

tie the 4 to the stakes to prevent the screen fromropes (G)

tilting or failing over. As shown in fig. 18.

Screen Disassembly

1. Remove and from the ground.ropes (G) stackes (I)

2. Unlatch the hinged support bars on front side of each leg so that it is bent and fold that half of the legs

up for the next step.

3. Slowly lower the screen to the ground (towards the closed legs). Two people are needed for this step.

4. Unlatch the hinged support bars and fold down other half of legs.

5. Loosen and remove the ropes, from each leg.knob screws (E) and eye bolts (F)

6. Remove the frame from the legs (B) folding frame (A).

7. Detach the from the by carefully unsnapping each button asscreen material (D) folding frame (A)

shown.

8. Fold in half, folding the bottom of the screen towards the top. Then, fold in halfscreen material (D)

again in the same way. Lastly, fold the material into thirds to condense the length, see Fig. 19-21.

• If you prefer to roll the material, instead of folding into thirds, roll from one end to the other after

folding in half twice.

9. Unlatch the hinged support bars in each corner of the folding frame (A).

10. Press in the silver locking buttons, near the folding joints, and slowly gather the sides of the folding

frame.

11. Again, press in the silver locking buttons. Then, pick up one end of the folding frame, and walk it to

the other end, folding the longer sections into thirds.

12. Store the screen in the provided Be surecarrying bag (H).

to place folding frame, legs, and smaller parts into the

carrying bag first and place the material on top to keep

material from creasing or tearing.

3. Make sure all 4 corners of the frame are at a 90° angle and the hinged support bar is straight and not

bending. (Fig. 7-9)

5. Take the screen material (D) screen material bag (C) out of the and align the corners of the screen

material with the inside corners of the frame. Unfold as shown in the diagram (Fig. 11-12)

4. Insert the into the openings locted at the left andframe legs (B)

right bottom sides of the Secure them byfolding frame (A).

fastening the into the adjacent hole. Next, screwknob screw (E)

the into the openings located at the top of theeye bolts (F)

frame (Fig. 10).

6. Once the is fully extended, secure the material by snapping the buttons onto thescreen material (D)

frame studs as shown in Fig. 13-15. Fasten the buttons in the following order AB CD EF GH.

7. Tie 2 pieces of (1 on the left and 1 on the right) to the that are located at the top of therope eye bolts (F)

frame. Next, lift the screen up while simultaneously opening the frame legs. Two people are needed for

this step. Fig. 16-17

Produkt Specifikationer

Mærke:	GPX
Kategori:	Beamer
Model:	PJS909

Har du brug for hjælp?

Hvis du har brug for hjælp til GPX PJS909 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Beamer GPX Manualer

1 September 2024

1 September 2024

22 August 2024

22 August 2024

22 August 2024

Beamer Manualer

Nyeste Beamer Manualer

Philips NeoPix 130 Smart Manual

5 Marts 2025

Philips NeoPix 200 NPX200 Manual

5 Marts 2025

Acer DX427 Manual

30 Januar 2025

Acer HL-4K50 Manual

30 Januar 2025

Acer LR560ATV Manual

30 Januar 2025

Acer Vero PL3515ATV Manual

30 Januar 2025

Acer PD2528ic Manual

30 Januar 2025

Acer Vero PD2328 Manual

30 Januar 2025

Optoma UHZ35 Manual

29 Januar 2025

Acer P1165P Manual

13 Januar 2025