
*The rated voltage of this product is 5V, please check the
output voltage of your power supply and adapter type
carefully before connecting.
Pet Water Drinking Fountain x1
Please read these instructions carefully and retain
Blue light on - sufficient water supply.
Flashing red light - water needs to be refilled.
Flashing red light after water is added - restart the machine.
IMPORTANT SAFEGUARDS PACKING LIST
Water Pump x1 User Manual x1
Activated Carbon Filter x1
Remove the water storage tray, and
Install filter tray and activated
*Take out the filter, wash it with
water, then put it in the tray.
Install the water pump in the water bucket and lead the USB
cable out of the cord slot.
Install the water storage tray and
water spray head, then power on.
Fill the bucket with water
Product Name: Pet Water Fountain
Item Dimensions: 19.5 x 17 x 14.5cm
Suitable for all cats and small dogs
【 】Note This item is powered with USB.
• Use in an indoor household environment only away from heat sources.
• The product should be placed on a level, horizontal stable
surface that is easy to reach by pets and away from power
• Do not use if the power cord becomes damaged. Make
sure pets are supervised and don’t play with the power cord.
• It is recommended to place the product in a corner or near a
wall where it cannot be accidentally knocked over.
• Please take out the water pump when cleaning. The USB port
of the water pump is not allowed to be immersed in water. The
rest of the parts can be washed with water.
• If the product needs to be stored away for a longer time,
please unplug the power cord first, pour out the water, wash it,
and dry it thoroughly before storing.
• Children should use this product under adult supervision.
• Do not attempt to repair the product in order to avoid
accidental injuries. Contact after sales service.
(* Do not exceed the MAX line)
The correct installation direction of the water pump:
When installing the water pump, make sure to tightly place the power cord
in the slots marked on the image above.