HANNLOMAX HX-202Qi Manual

HANNLOMAX Clockradio HX-202Qi

Læs gratis den danske manual til HANNLOMAX HX-202Qi (4 sider) i kategorien Clockradio. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om HANNLOMAX HX-202Qi, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

PLL ALARM CLOCK RADIO WITH WIRELESS QI CHARGER,

USB PORT FOR CHARGING, MP3 PLAYBACK AND BLUETOOTH

Model : HX-202Qi

(Bluetooth pairing code: HX-202Qi HANNLOMAX)

IMPORTANT SAFETY INSTRUCTIONS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)

that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

11. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

12. Only use attachments/accessories specified by the manufacturer.

13. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury

from tip-over.

14. Unplug this apparatus during lightning storms or when unused for long periods of time.

15. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

FCC NOTICE

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions :

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

SPECIFICATIONS

Frequency Range: FM 87.5 – 108 MHz

Power Supply: AC 100-240V ~ 60/50 Hz

Rated Output DC9V / 3.5A

Backup Battery: CR2032 X 1 pc

Specifications are subject to change without prior notice.

-1-

LOCATION OF CONTROL

1 Phone Support ( for Qi charging)

2 STANDBY BUTTON

VOL + BUTTON

TIME/M+/+10 BUTTON

5 FUNC BUTTON

VOL – BUTTON

ALARM ON/OFF BUTTON

8 SNOOZE / DIMMER BUTTON /

NIGHT LIGHT









/ FM SCAN/ BT UNPAIR Button

10 PRESET / ■ BUTTON

11 SKIP+/TU+/ LIGHT + BUTTON

12 TIME ZONE BUTTON

13 SLEEP/TEMPERATURE BUTTON

14 SKIP-/TU-/LIGHT- BUTTON

15 LCD DISPLAY

16 USB PORT FOR CHARGING (1A)

17 Wireless Charging Status Indicator

18 USB PORT FOR CHARGING (1A) AND

PLAYBACK

19 Speaker

20 FM Antenna

21 DC JACK

22 AUX-in JACK

BACKUP BATTERY COMPARTMENT

TEMPERATURE SENSOR

LCD DISPLAY

-2-

CONNECTING THE UNIT TO POWER

AC OPERATION

Plug one end of the AC adaptor into the DC power Input, and then plug the other end into AC wall outlet.

Before switching on the unit, make sure that the voltage of your electricity supply is the same on the rating

plate.

BACK-UP BATTERY

The unit has pre-installed a CR-2032 lithium battery inside the back-up battery compartment. In case of power

failure or interrupted AC power, the current time, alarm time and the stored radio stations are preserved in the

memory of the unit by means of battery back-up function.

OPERATE THE CLOCK

When the clock is plugged in, the correct time will be displayed after a few seconds. (Note : The default Time

Zone is set on Zone 2 - Eastern Time). The clock will automatically indicate the AM (A) or PM(P) time on the

display.

SELECT THE TIME ZONE

There are 7 time zones programmed as follows:

ZONE 1 – Atlantic Time

ZONE 2 – Eastern Time (Default Setting)

ZONE 3 – Central Time

ZONE 4 – Mountain Time

ZONE 5 – Pacific Time

ZONE 6 – Yukon Time

ZONE 7 – Hawaiian Time

CHANGE THE TIME ZONE

Make sure that the unit is in STANDBY mode. To confirm, press the STANDBY Button

While the unit is in STANDBY mode, press the TIME ZONE Button, the display will show the current time zone

number.

Press the Button repeatedly to select your time zone. When the desire time zone is selected, TIME ZONE

release the Button, the time zone will store in the memory after 1-2 seconds.

When you moved to a different time zone, simply change the time zone to the new time zone, the unit will store

the new time zone in the memory.

-3-

SETTING THE CLOCK AND DATE

1. You can only set the Clock and Date when the unit is in STANDBY mode,

( When the unit is in STANDBY mode, there will be function modes) NO

2. : Press and hold the 12 HOURS/ 24 HOURS SETIING TIME/M+/+10

Button for about 1 second, (The display will show or 12HR 24 HR )

3. Press the SKIP+/TU+/LIGHT+ SKIP−/TU-/LIGHT- or Button to select the

desired setting. Press Button to confirm. TIME

4. After 12HR / 24 Setting, the digit will flash. HOUR

5. Press the SKIP+/TU+/LIGHT+ or SKIP−/TU-/LIGHT- Button to adjust the

hour. (In 12 HOUR setting, there will be “A” indicating AM and ‘ ” P

indicating PM)

6. When the hour is selected, press the TIME MINUTE Button again, the

digit will begin to flash on the display.

7. Press the SKIP+/TU+/LIGHT+ or SKIP−/TU-/LIGHT- Button to adjust the

minute.

8. When the minute is selected, press the TIME Button again, the YEAR will

show on the display and flash.

9. Press the SKIP+/TU+/LIGHT+ or SKIP−/TU-/LIGHT- Button to adjust the

year.

10. When the year is selected, press the Button again, the TIME MONTH will show on the display and flash.

11. Press the SKIP+/TU+/LIGHT+ or SKIP−/TU-/LIGHT- Button to adjust the MONTH.

12. When the MONTH is selected, press the TIME Button again, the DAY will show on the display and flash

13. Press the SKIP+/TU+/LIGHT+ or SKIP−/TU-/LIGHT- Button to adjust the DAY.

14. When the DAY is selected, press the TIME Button again. The display will back to the CLOCK display.

SETTING THE ALARMS

1. You can set up the alarm when the unit is STANDBY mode.

2. Press the ALARM ON/OFF Button. The display will show : ALARM ON” and the default alarm time.

3. Press and hold the ALARM ON/OFF Button. The alarm hour will flash

4. Press the SKIP+/TU+/LIGHT+ or SKIP−/TU-/LIGHT-Button to select the alarm hour.

5. When the desired alarm hour is selected, press the ALARM ON/OFF Button again, the alarm minute digit

will flash.

6. Press the SKIP+/TU+/LIGHT+ or SKIP−/TU-/LIGHT- Button to select the alarm minute.

7. When the desired alarm minute is selected, press the ALARM ON /OFF Button again, the alarm mode will

flash.

8. Press the SKIP+/TU+/LIGHT+ or SKIP−/TU-/LIGHT-Button to select the alarm modes.

There are three alarm modes:

US USB **: Alarm wake up mode is

rA: Alarm wake up mode is FM radio

bU Alarm wake up mode is buzzer

9. When the desired alarm mode is selected, press the ALARM ON /OFF Button again to complete the alarm

setting. The desired alarm time will remain on the display.

10. If you want to turn off the alarm, press the ALARM ON/OFF Button. The display will show “ALARM OFF”.

**Note: For Wake to USB, please make sure a USB device is inserted and can be properly played, otherwise

the unit will default to the buzzer alarm mode automatically.

-4-

Produkt Specifikationer

Mærke:	HANNLOMAX
Kategori:	Clockradio
Model:	HX-202Qi

Har du brug for hjælp?

Hvis du har brug for hjælp til HANNLOMAX HX-202Qi stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Clockradio HANNLOMAX Manualer

HANNLOMAX HX-112CR Manual

19 Juni 2025

HANNLOMAX HX-116CR Manual

19 Juni 2025

HANNLOMAX HX-1079BT Manual

19 Juni 2025

HANNLOMAX HX-202Qi Manual

19 Juni 2025

HANNLOMAX HX-117CR Manual

19 Juni 2025

HANNLOMAX HX-200 Manual

19 Juni 2025

HANNLOMAX HX-122CR Manual

19 Juni 2025

HANNLOMAX HX-123CR Manual

18 Juni 2025

HANNLOMAX HX-300CD Manual

18 Juni 2025

HANNLOMAX HX-135CR Manual

18 Juni 2025

Clockradio Manualer

Nyeste Clockradio Manualer

Essentiel B RRVI-100 Manual

19 Juni 2025

Kid'Sleep Moon Manual

18 Juni 2025

iTOMA CKS708 Manual

18 Juni 2025

Sunstech CK26 Manual

15 Juni 2025

Sunstech FRD18 Manual

15 Juni 2025

Sunstech FRD50BTWC Manual

14 Juni 2025

Jensen JCR-390 Manual

10 Juni 2025

Hama Bali Manual

9 Juni 2025

Hama Cuba Manual

9 Juni 2025

Magnasonic EAAC201 Manual

8 Juni 2025